Re : Avoir un Boot propre..........[Debutant]
Bonsoir
Merci beaucoup, ca y est j'ai ce que je voulais, maintenant il ne me
reste plus qu'a chercher.
A tout hasard, je vous met le log du Boot et le dmesg. On sait jamais
quelqu'un a peut etre eu le meme probleme et a trouve la solution ou
vous pourrez me donner des "pistes" de recherche.
A priori le log du boot semble confirmer ce que le dmesg me disais, a
savoir que j'ai un probleme d'IRQ.
Cordialement
Hugues
Log du BOOT:
Thu Mar 22 23:19:33 2007: bootlogd.
Thu Mar 22 23:19:33 2007: Activating swap.
Thu Mar 22 23:19:33 2007: Checking root file system...
Thu Mar 22 23:19:33 2007: fsck 1.37 (21-Mar-2005)
Thu Mar 22 23:19:33 2007: hdb3: clean, 56140/1465920 files,
254534/2929854 blocks
Thu Mar 22 22:19:34 2007: System time was Thu Mar 22 21:19:34 UTC 2007.
Thu Mar 22 22:19:34 2007: Setting the System Clock using the Hardware
Clock as reference...
Thu Mar 22 22:19:36 2007: System Clock set. System local time is now
Thu Mar 22 22:19:36 CET 2007.
Thu Mar 22 22:19:36 2007: Cleaning up ifupdown...done.
Thu Mar 22 22:19:36 2007: Calculating module dependencies... done.
Thu Mar 22 22:19:41 2007: Loading modules: ide-cd ide-detect ide-disk
psmouse modprobe: Can't locate module psmouse
Thu Mar 22 22:19:41 2007: mga
/lib/modules/2.4.27-3-386/kernel/drivers/char/drm/mga.o: init_module:
Cannot allocate memory
Thu Mar 22 22:19:41 2007: Hint: insmod errors can be caused by
incorrect module parameters, including invalid IO or IRQ parameters.
Thu Mar 22 22:19:41 2007: You may find more information in
syslog or the output from dmesg
Thu Mar 22 22:19:41 2007:
/lib/modules/2.4.27-3-386/kernel/drivers/char/drm/mga.o: insmod
/lib/modules/2.4.27-3-386/kernel/drivers/char/drm/mga.o failed
Thu Mar 22 22:19:41 2007:
/lib/modules/2.4.27-3-386/kernel/drivers/char/drm/mga.o: insmod mga
failed
Thu Mar 22 22:19:41 2007: agpgart
Thu Mar 22 22:19:41 2007: Checking all file systems...
Thu Mar 22 22:19:41 2007: fsck 1.37 (21-Mar-2005)
Thu Mar 22 22:19:41 2007: hdb1: clean, 28/48192 files, 15492/96358 blocks
Thu Mar 22 22:19:41 2007: hdb5: clean, 155/13418496 files,
429452/26814485 blocks
Thu Mar 22 22:19:41 2007: Setting kernel variables ...
Thu Mar 22 22:19:41 2007: ... done.
Thu Mar 22 22:19:41 2007: Mounting local filesystems...
Thu Mar 22 22:19:41 2007: /dev/hdb1 on /boot type ext3 (rw)
Thu Mar 22 22:19:41 2007: /dev/hdb5 on /home type ext3 (rw)
Thu Mar 22 22:19:41 2007: /dev/hda1 on /mnt/win_c type vfat (rw)
Thu Mar 22 22:19:41 2007: /dev/hda5 on /mnt/win_d type vfat (rw)
Thu Mar 22 22:19:41 2007: /dev/hda6 on /mnt/win_e type vfat (rw)
Thu Mar 22 22:19:41 2007: /dev/hda7 on /mnt/win_f type vfat (rw)
Thu Mar 22 22:19:41 2007: Cleaning /tmp /var/run /var/lock.
Thu Mar 22 22:19:42 2007: Detecting hardware: via-ircc b44 via82cxxx
ide-scsi via82cxxx_audio usb-uhci ehci-hcd
Thu Mar 22 22:19:42 2007: Loading via-ircc module.
Thu Mar 22 22:19:42 2007:
/lib/modules/2.4.27-3-386/kernel/drivers/net/irda/via-ircc.o:
init_module: No such device
Thu Mar 22 22:19:42 2007: Hint: insmod errors can be caused by
incorrect module parameters, including invalid IO or IRQ parameters.
Thu Mar 22 22:19:42 2007: You may find more information in
syslog or the output from dmesg
Thu Mar 22 22:19:42 2007:
/lib/modules/2.4.27-3-386/kernel/drivers/net/irda/via-ircc.o: insmod
/lib/modules/2.4.27-3-386/kernel/drivers/net/irda/via-ircc.o failed
Thu Mar 22 22:19:42 2007:
/lib/modules/2.4.27-3-386/kernel/drivers/net/irda/via-ircc.o: insmod
via-ircc failed
Thu Mar 22 22:19:42 2007: Loading b44 module.
Thu Mar 22 22:19:42 2007: Skipping already loaded module via82cxxx.
Thu Mar 22 22:19:42 2007: Loading ide-scsi module.
Thu Mar 22 22:19:42 2007: Loading via82cxxx_audio module.
Thu Mar 22 22:19:42 2007: Loading usb-uhci module.
Thu Mar 22 22:19:43 2007: Loading ehci-hcd module.
Thu Mar 22 22:19:43 2007: Running 0dns-down to make sure resolv.conf
is ok...done.
Thu Mar 22 22:19:43 2007: Setting up networking...done.
Thu Mar 22 22:19:43 2007: Starting hotplug subsystem:
Thu Mar 22 22:19:43 2007: pci
Thu Mar 22 22:19:43 2007: matroxfb_base: ignoring pci display module
Thu Mar 22 22:19:43 2007: via82cxxx_audio: already loaded
Thu Mar 22 22:19:43 2007: insmod:
/lib/modules/2.4.27-3-386/kernel/drivers/net/irda/via-ircc.o:
init_module: No such device
Thu Mar 22 22:19:43 2007: insmod: Hint: insmod errors can be caused by
incorrect module parameters, including invalid IO or IRQ parameters.
Thu Mar 22 22:19:43 2007: You may find more information in
syslog or the output from dmesg
Thu Mar 22 22:19:43 2007: insmod:
/lib/modules/2.4.27-3-386/kernel/drivers/net/irda/via-ircc.o: insmod
via-ircc failed
Thu Mar 22 22:19:43 2007: via-ircc: can't be loaded
Thu Mar 22 22:19:43 2007: missing kernel or user mode driver via-ircc
Thu Mar 22 22:19:43 2007: ehci-hcd: already loaded
Thu Mar 22 22:19:43 2007: usb-uhci: already loaded
Thu Mar 22 22:19:43 2007: insmod:
/lib/modules/2.4.27-3-386/kernel/drivers/usb/host/uhci.o: init_module:
No such device
Thu Mar 22 22:19:43 2007: insmod: Hint: insmod errors can be caused by
incorrect module parameters, including invalid IO or IRQ parameters.
Thu Mar 22 22:19:43 2007: You may find more information in
syslog or the output from dmesg
Thu Mar 22 22:19:43 2007: insmod:
/lib/modules/2.4.27-3-386/kernel/drivers/usb/host/uhci.o: insmod uhci
failed
Thu Mar 22 22:19:43 2007: uhci: can't be loaded
Thu Mar 22 22:19:43 2007: missing kernel or user mode driver uhci
Thu Mar 22 22:19:43 2007: b44: already loaded
Thu Mar 22 22:19:43 2007: pci [success]
Thu Mar 22 22:19:43 2007: usb
Thu Mar 22 22:19:48 2007: usbcore: already loaded
Thu Mar 22 22:19:48 2007: usbcore: already loaded
Thu Mar 22 22:19:51 2007: usbcore: already loaded
Thu Mar 22 22:19:51 2007: usbcore: already loaded
Thu Mar 22 22:19:54 2007: usbcore: already loaded
Thu Mar 22 22:19:54 2007: usbcore: already loaded
Thu Mar 22 22:19:57 2007: usbcore: already loaded
Thu Mar 22 22:19:57 2007: usbcore: already loaded
Thu Mar 22 22:19:57 2007: usb [success]
Thu Mar 22 22:19:57 2007: isapnp
Thu Mar 22 22:19:57 2007: isapnp [success]
Thu Mar 22 22:19:57 2007: ide
Thu Mar 22 22:19:57 2007: ide [success]
Thu Mar 22 22:19:57 2007: input
Thu Mar 22 22:19:57 2007: input [failed]
Thu Mar 22 22:19:57 2007: scsi
Thu Mar 22 22:19:57 2007: scsi [success]
Thu Mar 22 22:19:57 2007: done.
Thu Mar 22 22:19:57 2007: Setting up IP spoofing protection: rp_filter.
Thu Mar 22 22:19:57 2007: Configuring network interfaces...done.
Thu Mar 22 22:19:57 2007: Starting portmap daemon: portmap.
Thu Mar 22 22:19:58 2007: ^[]RSetting up general console font...
Setting up per-VC ACM's: /dev/tty1 (iso15), /dev/tty2 (iso15),
/dev/tty3 (iso15), /dev/tty4 (iso15), /dev/tty5 (iso15), /dev/tty6
(iso15), done.
Thu Mar 22 22:19:58 2007: ^[[9;30]^[[14;30]
Thu Mar 22 22:19:58 2007: Setting the System Clock using the Hardware
Clock as reference...
Thu Mar 22 22:19:59 2007: System Clock set. Local time: Thu Mar 22
22:19:59 CET 2007
Thu Mar 22 22:19:59 2007:
Thu Mar 22 22:19:59 2007: Initializing random number generator...done.
Thu Mar 22 22:19:59 2007: Setting up X server socket directory
/tmp/.X11-unix...done.
Thu Mar 22 22:19:59 2007: Setting up ICE socket directory /tmp/.ICE-unix...done.
Thu Mar 22 22:19:59 2007: INIT: Entering runlevel: 2
Thu Mar 22 22:19:59 2007: Starting system log daemon: syslogd.
Thu Mar 22 22:19:59 2007: Starting kernel log daemon: klogd.
Thu Mar 22 22:19:59 2007: Starting portmap daemon: portmap.
Thu Mar 22 22:20:00 2007: Starting advanced power management daemon: apmd.
Thu Mar 22 22:20:00 2007: Starting printer spooler: lpd .
Thu Mar 22 22:20:00 2007: Starting internet superserver: inetd.
Thu Mar 22 22:20:00 2007: Starting NFS common utilities: statd.
Thu Mar 22 22:20:01 2007: Starting periodic command scheduler: cron.
Log DMESG:
Linux version 2.4.27-3-386 (pbuilder@dl360-g3) (gcc version 3.3.5
(Debian 1:3.3.5-13)) #1 Wed Dec 6 00:38:33 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131068
zone(0): 4096 pages.
zone(1): 126972 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 ASUS ) @ 0x000f5c10
ACPI: RSDT (v001 ASUS A7V8X 0x42302e31 MSFT 0x31313031) @ 0x1fffc000
ACPI: FADT (v001 ASUS A7V8X 0x42302e31 MSFT 0x31313031) @ 0x1fffc0b2
ACPI: BOOT (v001 ASUS A7V8X 0x42302e31 MSFT 0x31313031) @ 0x1fffc030
ACPI: MADT (v001 ASUS A7V8X 0x42302e31 MSFT 0x31313031) @ 0x1fffc058
ACPI: DSDT (v001 ASUS A7V8X 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Pentium(tm) Pro APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Kernel command line: root=/dev/hdb3 ro noapic nolapic
Initializing CPU#0
Detected 1800.109 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3591.37 BogoMIPS
Memory: 512616k/524272k available (1070k kernel code, 11268k reserved,
458k data, 96k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(TM) XP 2200+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xf1770, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/3177] at 00:11.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS
MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3692 blocks [1 disk] into ram disk... | / - \ | / - \
| / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / -
\ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | /
- \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ |
/ - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \
| / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / -
\ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | /
- \ | / - \ | / - \ | / - done.
Freeing initrd memory: 3692k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 96k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6Y120P0, ATA DISK drive
hdb: Maxtor 6Y120P0, ATA DISK drive
blk: queue e0825b40, I/O limit 4095Mb (mask 0xffffffff)
blk: queue e0825c7c, I/O limit 4095Mb (mask 0xffffffff)
hdc: YAMAHA CRW-F1E, ATAPI CD/DVD-ROM drive
hdd: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=238216/16/63, UDMA(133)
hdb: attached ide-disk driver.
hdb: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=14946/255/63, UDMA(133)
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [14946/255/63] p1 p2 < p5 p6 p7 >
/dev/ide/host0/bus0/target1/lun0: p1 p2 p3 p4 < p5 >
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 979956k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,67), internal journal
Real Time Clock Driver v1.10f
hdc: attached ide-cdrom driver.
hdc: ATAPI 44X CD-ROM CD-R/RW drive, 8192kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
hdd: attached ide-cdrom driver.
hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[drm:drm_init] *ERROR* Cannot initialize the agpgart module.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT400 chipset
agpgart: AGP aperture is 64M @ 0xf8000000
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,69), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
irda_init()
b44.c:v0.93 (Mar, 2004)
PCI: Found IRQ 10 for device 00:09.0
eth0: Broadcom 4400 10/100BaseT Ethernet 00:e0:18:99:93:39
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Via 686a/8233/8235 audio driver 1.9.1-ac3
PCI: Found IRQ 6 for device 00:11.5
IRQ routing conflict for 00:11.5, have irq 9, want irq 6
via82cxxx: Six channel audio available
PCI: Setting latency timer of device 00:11.5 to 64
ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
via82cxxx: board #1 at 0xE000, IRQ 9
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 00:57:47 Dec 6 2006
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 3 for device 00:10.0
IRQ routing conflict for 00:10.0, have irq 5, want irq 3
IRQ routing conflict for 00:10.1, have irq 5, want irq 3
IRQ routing conflict for 00:10.2, have irq 5, want irq 3
IRQ routing conflict for 00:10.3, have irq 5, want irq 3
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 3 for device 00:10.1
IRQ routing conflict for 00:10.0, have irq 5, want irq 3
IRQ routing conflict for 00:10.1, have irq 5, want irq 3
IRQ routing conflict for 00:10.2, have irq 5, want irq 3
IRQ routing conflict for 00:10.3, have irq 5, want irq 3
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 3 for device 00:10.2
IRQ routing conflict for 00:10.0, have irq 5, want irq 3
IRQ routing conflict for 00:10.1, have irq 5, want irq 3
IRQ routing conflict for 00:10.2, have irq 5, want irq 3
IRQ routing conflict for 00:10.3, have irq 5, want irq 3
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
PCI: Found IRQ 3 for device 00:10.3
IRQ routing conflict for 00:10.0, have irq 5, want irq 3
IRQ routing conflict for 00:10.1, have irq 5, want irq 3
IRQ routing conflict for 00:10.2, have irq 5, want irq 3
IRQ routing conflict for 00:10.3, have irq 5, want irq 3
ehci_hcd 00:10.3: VIA Technologies, Inc. USB 2.0
ehci_hcd 00:10.3: irq 5, pci mem e0879000
usb.c: new USB bus registered, assigned bus number 4
ehci_hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 6 ports detected
irda_init()
uhci.c: USB Universal Host Controller Interface driver v1.1
b44: eth0: Link is down.
Le 22/03/07, fred<fredantispam@free.fr> a écrit :
"Hugues MORIN" <morinh@gmail.com> a écrit :
> J'aurai peut etre du le dire plutot mais j'ai deja regarde tous les
> fichiers de Log qui sont dans /var/log/ mais sans resultat.
marsu[pts/0]:~/{92}/> cat /etc/default/bootlogd
# Run bootlogd at startup ?
BOOTLOGD_ENABLE=Yes
et tu devrais avoir au boot tes messages dans /var/log/boot
HTH.
--
Fred.
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et
"Reply-To:"
To UNSUBSCRIBE, email to debian-user-french-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org
Reply to: