[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Pb avec chipset bcm43xx





Identification
Identifiant du disque: ‎ATA Maxtor 6L200M0

Classe de matériel: ‎hd

Identification de Bus
Identifiant du périphérique: ‎0
moi j'ai ceçi:

Périphérique
Ancien nom de périphérique: ‎/dev/sda
Nouveau périphérique devfs: ‎/dev/scsi/host0/bus0/target0/lun0/disc
Partitions
Partitions primaires: ‎4 (sda1, sda2, sda3, sda4)
Connexion
Bus: ‎SCSI
Canal: ‎0
Numéro d'unité logique: ‎0
Divers
Géométrie: ‎24792/255/63 (CHS)
Contrôleur disque: ‎0
Module: ‎ata_piix

Le Samedi 2 Septembre 2006 10:49, Sébastien CRAMATTE a écrit :
> qu'est ce que te racontes iwscan ?
> ta borne est t'elle bien visible  ?
>
> Patrice OLIVER a écrit :
> > Bonjour,
> >
> > Je sais que c'est stupide (d'autant que c'est la première fois que
> > j'ai ce pb), mais je ne parviens pas à utiliser mon chipset wifi
> > bcm4306.
> >
> > J'ai installé bcm43xx-fwcutter, puis lancer
> > /usr/share/bcm43xx-fwcutter/install_bcm43xx_firmware.sh
> > Ensuite, rmmod bcm43xx, modprobe bcm43xx.
> >
> > J'ai ensuite configuré mon interface eth0
> > ifconfig eth0 192.168.0.205 up
> > iwconfig eth0 essid monssid
> > iwconfig eth0 key 19191919191919191919191919
> >
> >
> > Dans /var/log/messages, j'obtiens bien :
> > Sep  2 10:27:49 localhost kernel: bcm43xx: Chip ID 0x4306, rev 0x3
> > Sep  2 10:27:49 localhost kernel: bcm43xx: Number of cores: 5
> > Sep  2 10:27:49 localhost kernel: bcm43xx: Core 0: ID 0x800, rev 0x4,
> > vendor 0x4243, enabled
> > Sep  2 10:27:49 localhost kernel: bcm43xx: Core 1: ID 0x812, rev 0x5,
> > vendor 0x4243, disabled
> > Sep  2 10:27:49 localhost kernel: bcm43xx: Core 2: ID 0x80d, rev 0x2,
> > vendor 0x4243, enabled
> > Sep  2 10:27:49 localhost kernel: bcm43xx: Core 3: ID 0x807, rev 0x2,
> > vendor 0x4243, disabled
> > Sep  2 10:27:49 localhost kernel: bcm43xx: Core 4: ID 0x804, rev 0x9,
> > vendor 0x4243, enabled
> > Sep  2 10:27:49 localhost kernel: bcm43xx: PHY connected
> > Sep  2 10:27:49 localhost kernel: bcm43xx: Detected PHY: Version: 2,
> > Type 2, Revision 2
> > Sep  2 10:27:49 localhost kernel: bcm43xx: Detected Radio: ID:
> > 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
> > Sep  2 10:27:49 localhost kernel: bcm43xx: Radio turned off
> > Sep  2 10:27:49 localhost kernel: bcm43xx: Radio turned off
> > Sep  2 10:27:49 localhost kernel: bcm43xx: PHY connected
> > Sep  2 10:27:49 localhost kernel: bcm43xx: Radio turned on
> > Sep  2 10:27:49 localhost kernel: bcm43xx: Chip initialized
> > Sep  2 10:27:49 localhost kernel: bcm43xx: DMA initialized
> > Sep  2 10:27:49 localhost kernel: bcm43xx: 80211 cores initialized
> > Sep  2 10:27:49 localhost kernel: bcm43xx: Keys cleared
> > Sep  2 10:27:49 localhost kernel: bcm43xx: Controller restarted
> > Sep  2 10:27:49 localhost kernel: SoftMAC: Open Authentication
> > completed with 00:13:60:ee:f4:30
> >
> >
> > Mais impossible de faire un ping jusqu'à la gateway : 192.168.0.254
> >
> >
> > Une idée ?
> >
> > Merci,
> > Patrice.

-- 
WEB server: http://www.on4hu.be/
FTP server: ftp://ftp.on4hu.be/
COMPUTERS ARE LIKE AIR-CONDITIONERS THEY STOP WORKING
PROPERLY AS SOON AS YOU OPEN WINDOWS



Reply to: