Re: astuce install sur DD usb mass storage
Bonsoir,
2006/8/26, Vincent Bernat <bernat@luffy.cx>:
OoO En ce début d'après-midi ensoleillé du jeudi 24 août 2006, vers
15:57, "philippe L" <ptilou@gmail.com> disait:
> Comment installer debian (3rc2) sur un volume sda emulation scsi via
> usb module uhci ou ohci sans passer par la senpiternelle initrd ?
> Le script kn5 ne reconnait même pas le DD, pour la phase formatage !
Pourquoi vouloir se passer de l'initrd ?
Parceque je n'arive pas a l'utiliser !
Plus serieusement, je n'ai pas de connexion au net, mais est les 14
iso sur le DD
(loop plante au bout du 4 ou 5 mais c'est une bonne idée, ne vaut'il
mieux pas tous mettre a plat sur le DD ?) une partition de 8 Go ext3 +
500 Mo swap + 70 Go de partition vfat
J'ai un temps d'attente quand initrd examine mon DD ( enfin je sais
pas pourquoi sa bloque 1 mn ) juste avant montage de hda ?
Mon dmesg ainsi que lsusb -v et lspci -v
merci de vos lumieres pour utiliser les iso et booter sur le DD
Ptilou
Bus 001 Device 005: ID 0c45:1060 Microdia iFlash SM-Direct Card Reader
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0c45 Microdia
idProduct 0x1060 iFlash SM-Direct Card Reader
bcdDevice 1.00
iManufacturer 0
iProduct 1 USB Mass Storage Device
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 004: ID 067b:2507 Prolific Technology, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x067b Prolific Technology, Inc.
idProduct 0x2507
bcdDevice 1.00
iManufacturer 1 Prolific Technology Inc.
iProduct 2 Mass Storage Device
iSerial 3 00
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.17 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:13.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x0002
No power switching (usb 1.0)
Ganged overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0103 power enable connect
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 001 Device 002: ID 05e3:0606 Genesys Logic, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x05e3 Genesys Logic, Inc.
idProduct 0x0606
bcdDevice 7.02
iManufacturer 0
iProduct 1 USB2.0 Hub
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x00e9
Per-port power switching
Per-port overcurrent protection
Port indicators
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 100 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0103 power enable connect
Port 2: 0000.0103 power enable connect
Port 3: 0000.0103 power enable connect
Port 4: 0000.0100 power
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 001 Device 003: ID 0846:6a00 NetGear, Inc. WG111 WiFi (v2)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0846 NetGear, Inc.
idProduct 0x6a00 WG111 WiFi (v2)
bcdDevice 1.00
iManufacturer 1 NETGEAR WG111v2
iProduct 2 NETGEAR WG111v2
iSerial 3 00146CB36E4D
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 Wireless Network Card
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 0 (Defined at Interface level)
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 5 Bulk-IN,Bulk-OUT,Bulk-OUT
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
Linux version 2.6.17 (root@Knoppix) (gcc version 4.0.4 20060507
(prerelease) (Debian 4.0.3-3)) #4 SMP PREEMPT Wed May 10 13:53:45 CEST
2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0c00 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000006000000 (usable)
BIOS-e820: 00000000ffff0c00 - 0000000100000000 (reserved)
0MB HIGHMEM available.
96MB LOWMEM available.
On node 0 totalpages: 24576
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 20480 pages, LIFO batch:3
DMI not present or invalid.
ACPI: Unable to locate RSDP
Allocating PCI resources starting at 10000000 (gap: 06000000:f9ff0c00)
Built 1 zonelists
Kernel command line: root=/dev/hda1 ro ramdisk_size=100000 lang=fr
apm=power-off nomce vga=788
No local APIC present or hardware disabled
mapped APIC to ffffd000 (010c9000)
Initializing CPU#0
PID hash table entries: 512 (order: 9, 2048 bytes)
Detected 328.027 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 88312k/98304k available (2225k kernel code, 9536k reserved,
807k data, 324k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 670.62 BogoMIPS (lpj=1341256)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 008021bf 808029bf 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 008021bf 808029bf 00000000 00000000
00000000 00000000 00000000
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After all inits, caps: 008021bf 808029bf 00000000 00000002
00000000 00000000 00000000
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
CPU0: AMD-K6(tm) 3D processor stepping 0c
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 4928k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb26, last bus=0
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f7ea0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xaa4c, dseg 0x400
PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:12.0
PCI: Using IRQ router OPTI [1045/c700] at 0000:00:01.0
pnp: 00:01: ioport range 0x370-0x371 has been reserved
pnp: 00:01: ioport range 0x40b-0x40b has been reserved
pnp: 00:01: ioport range 0x4d6-0x4d6 has been reserved
pnp: 00:01: ioport range 0x480-0x48f has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:12.0
PCI: Bus 1, cardbus bridge: 0000:00:0a.0
IO window: 00001000-000010ff
IO window: 00001400-000014ff
PREFETCH window: 10000000-11ffffff
MEM window: 12000000-13ffffff
PCI: Bus 5, cardbus bridge: 0000:00:0a.1
IO window: 00001800-000018ff
IO window: 00001c00-00001cff
PREFETCH window: 14000000-15ffffff
MEM window: 16000000-17ffffff
PCI: setting IRQ 11 as level-triggered
PCI: Assigned IRQ 11 for device 0000:00:0a.0
PCI: Sharing IRQ 11 with 0000:00:0a.1
PCI: Setting latency timer of device 0000:00:0a.0 to 64
PCI: Found IRQ 11 for device 0000:00:0a.1
PCI: Sharing IRQ 11 with 0000:00:0a.0
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 49152 bytes)
TCP bind hash table entries: 2048 (order: 2, 24576 bytes)
TCP: Hash tables configured (established 4096 bind 2048)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1156965161.144:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
vesafb: framebuffer at 0xfd000000, mapped to 0xc6880000, using 1875k,
total 1920k
vesafb: mode is 800x600x16, linelength=1600, pages=1
vesafb: protected mode interface info at c000:8c90
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
OPTI621X: IDE controller at PCI slot 0000:00:14.0
OPTI621X: chipset revision 48
OPTI621X: not 100% native mode: will probe irqs later
PCI: Setting latency timer of device 0000:00:14.0 to 64
ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xfcf8-0xfcff, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: HITACHI_DK237A-32, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA CD-ROM XM-1902B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 6354432 sectors (3253 MB) w/512KiB Cache, CHS=6304/16/63
hda: hda1 hda2 hda3
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
libata version 1.20 loaded.
PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
EISA: Detected 0 cards.
NET: Registered protocol family 1
NET: Registered protocol family 15
Using IPI No-Shortcut mode
Freeing unused kernel memory: 324k freed
input: AT Translated Set 2 keyboard as /class/input/input0
Synaptics Touchpad, model: 1, fw: 4.6, id: 0xf5ca1, caps: 0x80471b/0x0
input: SynPS/2 Synaptics TouchPad as /class/input/input1
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
PCI: Found IRQ 10 for device 0000:00:13.0
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 10, io mem 0xfecff000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using ohci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.1: new full speed USB device using ohci_hcd and address 3
usb 1-1.1: configuration #1 chosen from 1 choice
usb 1-1.2: new full speed USB device using ohci_hcd and address 4
usb 1-1.2: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Vendor: HDS72808 Model: 0PLAT20 Rev: PF2O
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 160836479 512-byte hdwr sectors (82348 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 160836479 512-byte hdwr sectors (82348 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
usb-storage: device scan complete
ReiserFS: hda1: found reiserfs format "3.6" with standard journal
ReiserFS: hda1: using ordered data mode
ReiserFS: hda1: journal params: device hda1, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: hda1: checking transaction log (hda1)
ReiserFS: hda1: Using r5 hash to sort names
Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE,EPP]
PCI: Found IRQ 11 for device 0000:00:0a.0
PCI: Sharing IRQ 11 with 0000:00:0a.1
Yenta: CardBus bridge found at 0000:00:0a.0 [0e11:b0c3]
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Yenta: ISA IRQ mask 0x02d8, PCI irq 11
Socket status: 30000006
PCI: Found IRQ 11 for device 0000:00:0a.1
PCI: Sharing IRQ 11 with 0000:00:0a.0
Yenta: CardBus bridge found at 0000:00:0a.1 [0e11:b0c3]
Yenta: ISA IRQ mask 0x02d8, PCI irq 11
Socket status: 30000007
ts: Compaq touchscreen protocol output
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x800-0x80f: excluding 0x800-0x807
cs: IO port probe 0x100-0x4ff: excluding 0x240-0x24f 0x320-0x327 0x390-0x397
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x800-0x80f: excluding 0x800-0x807
cs: IO port probe 0x100-0x4ff: excluding 0x240-0x24f 0x320-0x327 0x390-0x397
cs: IO port probe 0xa00-0xaff: clean.
Adding 586364k swap on /dev/hda2. Priority:-1 extents:1 across:586364k
Adding 514072k swap on /dev/sda2. Priority:-2 extents:1 across:514072k
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
USB Universal Host Controller Interface driver v3.0
Registering unionfs 20060221-0341
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
hda: Selected PIO mode 3
ide0: master: address: 1, data: 3, recovery: 3, drdy: 2 [clk]
ide0: slave: address: 1, data: 1, recovery: 2, drdy: 2 [clk]
loop: loaded (max 8 devices)
ISO 9660 Extensions: Microsoft Joliet Level 1
ISOFS: changing to secondary root
usb 1-1.3: new full speed USB device using ohci_hcd and address 5
usb 1-1.3: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
Vendor: USB NAND Model: FLASH DISK Rev: 0.20
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdb: 64000 512-byte hdwr sectors (33 MB)
sdb: Write Protect is off
sdb: Mode Sense: 0b 00 00 08
sdb: assuming drive cache: write through
SCSI device sdb: 64000 512-byte hdwr sectors (33 MB)
sdb: Write Protect is off
sdb: Mode Sense: 0b 00 00 08
sdb: assuming drive cache: write through
sdb: sdb1
sd 1:0:0:0: Attached scsi removable disk sdb
usb-storage: device scan complete
ISO 9660 Extensions: Microsoft Joliet Level 1
ISOFS: changing to secondary root
ISO 9660 Extensions: Microsoft Joliet Level 1
ISOFS: changing to secondary root
0000:00:00.0 Host bridge: OPTi Inc. 82C701 [FireStar Plus] (rev 32)
Flags: bus master, medium devsel, latency 0
0000:00:01.0 ISA bridge: OPTi Inc. 82C700 [FireStar] (rev 31)
Flags: bus master, medium devsel, latency 0
0000:00:0a.0 CardBus bridge: Texas Instruments PCI1131 (rev 01)
Subsystem: Compaq Computer Corporation: Unknown device b0c3
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 18000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=04, sec-latency=176
Memory window 0: 10000000-11fff000 (prefetchable)
Memory window 1: 12000000-13fff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
16-bit legacy interface ports at 0001
0000:00:0a.1 CardBus bridge: Texas Instruments PCI1131 (rev 01)
Subsystem: Compaq Computer Corporation: Unknown device b0c3
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 18001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=05, subordinate=08, sec-latency=176
Memory window 0: 14000000-15fff000 (prefetchable)
Memory window 1: 16000000-17fff000
I/O window 0: 00001800-000018ff
I/O window 1: 00001c00-00001cff
16-bit legacy interface ports at 0001
0000:00:12.0 VGA compatible controller: Neomagic Corporation NM2160
[MagicGraph 128XD] (rev 01) (prog-if 00 [VGA])
Subsystem: Compaq Computer Corporation: Unknown device b0bd
Flags: bus master, medium devsel, latency 128, IRQ 11
Memory at fd000000 (32-bit, prefetchable) [size=16M]
Memory at fea00000 (32-bit, non-prefetchable) [size=2M]
Memory at fed00000 (32-bit, non-prefetchable) [size=1M]
0000:00:13.0 USB Controller: OPTi Inc. 82C861 (rev 10) (prog-if 10 [OHCI])
Subsystem: Compaq Computer Corporation: Unknown device f8b0
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at fecff000 (32-bit, non-prefetchable) [size=4K]
0000:00:14.0 IDE interface: OPTi Inc. 82C825 [Firebridge 2] (rev 30)
(prog-if 80 [Master])
Subsystem: Compaq Computer Corporation: Unknown device b0c2
Flags: bus master, medium devsel, latency 0
I/O ports at fcf0 [size=16]
Reply to: