[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Re-Re: [Re: là je craque vraiment ! 8-((] je craque plus, je pleure !

Le 26.01.2005 22:42:43, Gerard Kohler a écrit :

bonjour,
j'ai toujours les mêmes problèmes d'intallation de la sarge sur mon ordinateur. 

pour rappel :
après avoir installé le cd I de la sarge sur une partition, impossible de lancere le systeme nouvellement installé pour finalisé l'installation. le lancement se bloque. L'instalation secondaire d'une mandrake, suze et redhat se passe sans problème sur la même partition ! 

	le nom de ma machine est patate !
apparement ce n'est pas un problème de dd : badbloks me dit que tout va bien.
j'ai essayé d'installer avec différents systemes de fichiers (ext3, ext2, reiserf ...),j'ai souvent eu des echecs d'installation de grub sur la partion /dev/hda6 (lilo est installé sur le masterboot). 

comment faire pour trouver ce qui cloche ?

meci de votre aide

Gérard



/**************************************************************/
je vous joins mon /etc/inittab

# /etc/inittab: init(8) configuration.
#
# WARNING: This file is installed by the Debian installer.
# It is not meant to be used by default, but only to make
# sure that certain configurations are done after the initial
# boot into a new system. The real inittab is most likely
# named /etc/inittab.real.
#
# $Id: inittab.install 14565 2004-05-01 18:31:25Z joshk $

id:2:initdefault:
si::sysinit:/etc/init.d/rcS
~~:S:wait:/sbin/sulogin

l0:0:wait:/etc/init.d/rc 0
l1:1:wait:/etc/init.d/rc 1
l2:2:wait:/etc/init.d/rc 2
l3:3:wait:/etc/init.d/rc 3
l4:4:wait:/etc/init.d/rc 4
l5:5:wait:/etc/init.d/rc 5
l6:6:wait:/etc/init.d/rc 6

ca:12345:ctrlaltdel:/sbin/shutdown -t1 -r now
kb::kbrequest:/bin/echo "Keyboard Request--edit /etc/inittab to let this work." 
pf::powerwait:/etc/init.d/powerfail start
pn::powerfailnow:/etc/init.d/powerfail now
po::powerokwait:/etc/init.d/powerfail stop
1:2345:respawn:/usr/sbin/termwrap /usr/sbin/base-config new </dev/tty1 >/dev/tty1 2>&1 
2:23:respawn:/sbin/getty 38400 tty2
3:23:respawn:/sbin/getty 38400 tty3



/**************************************************************/

je vous joins mon /var/log/syslog :
Jan 26 21:38:02 patate kernel: isapnp: Scanning for PnP cards...
Jan 26 21:38:02 patate kernel: isapnp: No Plug & Play device found
Jan 26 21:38:02 patate kernel: pty: 1024 Unix98 ptys configured
Jan 26 21:38:02 patate kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled Jan 26 21:38:02 patate kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Jan 26 21:38:02 patate kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Jan 26 21:38:02 patate kernel: RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Jan 26 21:38:02 patate kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Jan 26 21:38:02 patate kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Jan 26 21:38:02 patate kernel: VP_IDE: IDE controller at PCI slot 0000:00:0f.0 
Jan 26 21:38:02 patate kernel: VP_IDE: chipset revision 6
Jan 26 21:38:02 patate kernel: VP_IDE: not 100%% native mode: will probe irqs later Jan 26 21:38:02 patate kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Jan 26 21:38:02 patate kernel: VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0 Jan 26 21:38:02 patate kernel: ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio Jan 26 21:38:02 patate kernel: ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio 
Jan 26 21:38:02 patate kernel: hda: Maxtor 6Y160P0, ATA DISK drive
Jan 26 21:38:02 patate kernel: Using anticipatory io scheduler
Jan 26 21:38:02 patate kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jan 26 21:38:02 patate kernel: hdc: LITE-ON DVDRW LDW-451S, ATAPI CD/DVD-ROM drive 
Jan 26 21:38:02 patate kernel: ide1 at 0x170-0x177,0x376 on irq 15
Jan 26 21:38:02 patate kernel: hda: max request size: 1024KiB
Jan 26 21:38:02 patate kernel: hda: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(133) Jan 26 21:38:02 patate kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 > Jan 26 21:38:02 patate kernel: mice: PS/2 mouse device common for all mice Jan 26 21:38:02 patate kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 Jan 26 21:38:02 patate kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Jan 26 21:38:02 patate kernel: input: AT Translated Set 2 keyboard on isa0060/serio0 Jan 26 21:38:02 patate kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 
Jan 26 21:38:02 patate kernel: EISA: Probing bus 0 at eisa0
Jan 26 21:38:02 patate kernel: NET: Registered protocol family 2
Jan 26 21:38:02 patate kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes Jan 26 21:38:02 patate kernel: TCP: Hash tables configured (established 262144 bind 65536) 
Jan 26 21:38:02 patate kernel: NET: Registered protocol family 1
Jan 26 21:38:02 patate kernel: BIOS EDD facility v0.12 2004-Jan-26, 1 devices found Jan 26 21:38:02 patate kernel: Please report your BIOS at http://linux.dell.com/edd/results.html 
Jan 26 21:38:02 patate kernel: PM: Reading pmdisk image.
Jan 26 21:38:02 patate kernel: PM: Resume from disk failed.
Jan 26 21:38:02 patate kernel: ACPI: (supports S0 S1 S4 S5)
Jan 26 21:38:02 patate kernel: md: Autodetecting RAID arrays.
Jan 26 21:38:02 patate kernel: md: autorun ...
Jan 26 21:38:02 patate kernel: md: ... autorun DONE.
Jan 26 21:38:02 patate kernel: VFS: Mounted root (ext2 filesystem) readonly. 
Jan 26 21:38:02 patate kernel: Mounted devfs on /dev
Jan 26 21:38:02 patate kernel: Freeing unused kernel memory: 272k freed Jan 26 21:38:02 patate /usr/sbin/cron[834]: (CRON) INFO (pidfile fd = 3) 
Jan 26 21:38:02 patate /usr/sbin/cron[835]: (CRON) STARTUP (fork ok)
Jan 26 21:38:03 patate init: Id "1" respawning too fast: disabled for 5 minutes Jan 26 21:38:03 patate /usr/sbin/cron[835]: (CRON) INFO (Running @reboot jobs) Jan 26 21:39:43 patate init: Id "2" respawning too fast: disabled for 5 minutes Jan 26 21:39:43 patate init: Id "3" respawning too fast: disabled for 5 minutes 

Jan 26 21:39:43 patate init: no more processes left in this runlevel
Jan 26 21:41:39 patate shutdown[871]: shutting down for system reboot <=== je stope ici ! 

Jan 26 21:41:39 patate init: Switching to runlevel: 6
Jan 26 21:41:43 patate kernel: Kernel logging (proc) stopped.
Jan 26 21:41:43 patate kernel: Kernel log daemon terminating.
Jan 26 21:41:43 patate exiting on signal 15



J'ai une petite (toute petite idée) :

On peut lire dans votre log
Jan 26 21:38:02 patate kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 > 

Ce qui veut probablement dire que vous utilisez devfs.
J'ai déjà rencontré ce problème avec devfs lorsque le démon devfsd ne tournait pas. 

Est-ce que vous pouvez éviter d'utiliser devfs ?
append devfs=nomount  dans votre lilo.conf par exemple.
Mais bon, c'est juste un truc comme ça, juste pour préserver votre cuir chevelu. 

Jean-Luc

Attachment: pgpuSrJxux6wq.pgp
Description: PGP signature

Reply to: