mise à jour kernel 2.4.27-6

[Gaëtan PERRIER <gaetan.perrier@free.fr>]

J'ai un petit soucis avec la mise à jour de ce soir voici ce qu'il me
dit et je ne sais pas quoi faire:

 You are attempting to install a kernel version that is the same as
 the version you are currently running (version 2.4.27-1-k7). The
modules
 list is quite likely to have been changed, and the modules dependency
 file /lib/modules/2.4.27-1-k7/modules.dep needs to be re-built. It
can
 not be built correctly right now, since the module list for the
 running kernel are likely to be different from the kernel installed.
 I am creating a new modules.dep file, but that may not be
 correct. It shall be regenerated correctly at next reboot.

 I repeat: you have to reboot in order for the modules file to be
 created correctly. Until you reboot, it may be impossible to load
 some modules. Reboot as soon as this install is finished (Do not
 reboot right now, since you may not be able to boot back up until
 installation is over, but boot immediately after). I can not stress
 that too much. You need to reboot soon.

Please Hit return to continue.
depmod: /lib/modules/2.4.27-1-k7/kernel/drivers/i2c/.placeholder is
not an ELF file
There was a problem running depmod.  This may be benign,
(You may have versioned symbol names, for instance).
Or this could be an error.
        depmod exited with return value 1
Since this image uses initrd, I am not deleting the file
/lib/modules/2.4.27-1-k7/modules.dep. However, there is no
guarantee that the file is valid. I would strongly advice
you to either abort and fix the errors in depmod, or
regenerate the initrd image with a known good modules.dep
file. I repeat, an initrd kernel image with a bad modules.dep
shall fail to boot.
Would you like to abort now? [No]

Que dois-je faire?

Merci de votre aide.