Re: apn canon

[Philippe Bourcier <buffalo.philANTIPUB@free.fr>]

    bonjour a toutes et a tous,

On Sun, Nov 28, 2004 at 08:04:53PM +0100, pierre wrote:
> j'ai un canon powershot S1 Is
> qui fonctionne bien sous mdk10, mais je n'arrive pas à y accéder sous
> sarge. Je ne sais pas quel device il utilise


j'utilise hotplug
voila comment je fais :
* je branche,
* /var/log/messages (ou /var/log/kern.log) :
Nov 28 17:45:43 ile kernel: hub.c: new USB device 00:07.2-1.2, assigned
address 4
Nov 28 17:45:43 ile kernel: usb.c: USB device 4 (vend/prod 0x54c/0x10)
is not claimed by any active driver. 
Nov 28 17:45:48 ile kernel: Initializing USB Mass Storage driver...
Nov 28 17:45:48 ile kernel: usb.c: registered new driver usb-storage
Nov 28 17:45:48 ile kernel: scsi2 : SCSI emulation for USB Mass Storage
devices
Nov 28 17:45:48 ile kernel: Vendor: Sony      Model: Sony DSC
Rev: 4.50
Nov 28 17:45:48 ile kernel: Type:   Direct-Access
ANSI SCSI revision: 02
Nov 28 17:45:48 ile kernel: Attached scsi removable disk sdc at scsi2,
channel 0, id 0, lun 0
Nov 28 17:45:48 ile kernel: SCSI device sdc: 253696 512-byte hdwr
sectors (130 MB)
Nov 28 17:45:48 ile kernel: sdc: Write Protect is off
Nov 28 17:45:48 ile kernel: /dev/scsi/host2/bus0/target0/lun0: p1
Nov 28 17:45:48 ile kernel: USB Mass Storage support registered.
Nov 28 17:45:48 ile usb.agent[3210]:      usb-storage: loaded
successfully
Nov 28 17:47:13 ile kernel: usb-uhci.c: interrupt, status 3, frame# 758
* je lis :
Nov 28 17:45:48 ile kernel: SCSI device sdc: 253696 512-byte hdwr
* je monte :
mount -t vfat /dev/sdc1 /mnt/
* je recopie, ...
* je n'oublie pas de demonter,
* je debranche,
* /var/log/messages :
Nov 28 17:49:39 ile kernel: usb.c: USB disconnect on device 00:07.2-1.2
address 4
-- 
Philippe BOURCIER		http://bourcier.philippe.online.fr/