Erreur HD ATA 100
Bonsoir,
J'aimerai savoir comment configurer hwtools.
J'ai 2 disques IDE hda et hdc,
# cat /etc/init.d/hwtools | grep hdparm
if command -v hdparm >/dev/null 2>&1; then
hdparm -q -m8 -d1 -u1 -c1 /dev/hdc
hdparm -q -m8 -d1 -u1 -c1 /dev/hda
echo -n "hdparm"
dmeg m'indique :
hda: Maxtor 6Y080L0, ATA DISK drive
hdc: ST380022A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63,
UDMA(133)
hdc: attached ide-disk driver.
hdc: 156301488 sectors (80026 MB) w/1024KiB Cache, CHS=155061/16/63,
UDMA(100)
Pas de pb pour hda udma 133, mais pour hdc udma 100 j'ai cette erreur dans
les logs:
kernel: hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
kernel: hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
kernel: hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
kernel: hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
kernel: hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
kernel: hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
kernel: hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
kernel: hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
kernel: ide1: reset: success
Est-ce grave ?
@+
--
Michel Luc mluc@cern91.net | http://cern91.tuxfamily.org/
GAULE, LUG de l'Essonne: http://gaule..org/
-------------- GnuPG v1.0.6 (GNU/Linux) ---------------
Admin cern91.tuxfamily.org <admin@cern91.net>
GPG: 1024D/3D07B881
KFP: 155C 2287 2084 33E0 4263 8AC9 B10F 03CB 3D07 B881
---------------------------------------------------------
Reply to: