Imprimante USB marche puis se désactive
Bonjour,
Mon imprimante USB (Canon i560) fonctionne correctement quand je viens de booter puis apres kk impressions, les nouveaux jobs sont mis en attente et l'imprimante apparait désactivée dans le gestionnaire d'impression.
Ke faire pour trouver ce qui ne va pas et m'éviter de rebooter pour
pouvoir imprimer de nouveau ?
voilà kk infos :
dmesg
Linux version 2.4.22-xfs (root@Knoppix) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 SMP Fr Sep 19 17:55:45 CEST 2003
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
SiS router pirq escape (99)
SiS router pirq escape (99)
usb-ohci.c: USB OHCI at membase 0xd0b8b000, IRQ 11
usb-ohci.c: usb-00:02.3, Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Found IRQ 11 for device 00:02.2
PCI: Sharing IRQ 11 with 00:0b.2
usb-ohci.c: USB OHCI at membase 0xd0b8d000, IRQ 11
usb-ohci.c: usb-00:02.2, Silicon Integrated Systems [SiS] USB 1.0 Controller
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Found IRQ 11 for device 00:0b.1
PCI: Sharing IRQ 11 with 00:02.7
PCI: Sharing IRQ 11 with 00:0d.0
usb-ohci.c: USB OHCI at membase 0xd0b8f000, IRQ 11
usb-ohci.c: usb-00:0b.1, NEC Corporation USB (#2)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:0b.0
usb-ohci.c: USB OHCI at membase 0xd0b91000, IRQ 11
usb-ohci.c: usb-00:0b.0, NEC Corporation USB
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 3 ports detected
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
NTFS driver v1.1.22 [Flags: R/W MODULE]
SGI XFS snapshot 2.4.22-2003-09-03_04:09_UTC with ACLs, realtime, no debug enabled
SGI XFS Quota Management subsystem
hub.c: new USB device 00:0b.1-2, assigned address 2
EFS: 1.0a - http://aeschi.ch.eu.org/efs/
usb.c: USB device 2 (vend/prod 0x4b8/0x11f) is not claimed by any active driver.
hub.c: new USB device 00:0b.0-3, assigned address 2
usb.c: USB device 2 (vend/prod 0x4a9/0x1086) is not claimed by any active driver.
loop: loaded (max 8 devices)
usb.c: registered new driver usblp
printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1086
printer.c: v0.11: USB Printer Device Class driver
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
lp0: console ready
usb-ohci.c: OHCI Unrecoverable Error, controller usb-00:0b.0 disabled
usb_control/bulk_msg: timeout
usb.c: error getting string descriptor 0 (error=-108)
usb.c: error getting string descriptor 0 (error=-108)
usb.c: error getting string descriptor 0 (error=-108)
usb.c: error getting string descriptor 0 (error=-108)
usb.c: error getting string descriptor 0 (error=-108)
usb.c: error getting string descriptor 0 (error=-108)
usb.c: error getting string descriptor 0 (error=-108)
usb.c: error getting string descriptor 0 (error=-108)
usb.c: error getting string descriptor 0 (error=-108)
usb.c: error getting string descriptor 0 (error=-108)
usb.c: error getting string descriptor 0 (error=-108)
usb.c: error getting string descriptor 0 (error=-108)
usb.c: error getting string descriptor 0 (error=-108)
usb.c: error getting string descriptor 0 (error=-108)
usb.c: error getting string descriptor 0 (error=-108)
usb.c: error getting string descriptor 0 (error=-108)
usb.c: error getting string descriptor 0 (error=-108)
usb.c: error getting string descriptor 0 (error=-108)
lsmod
Module Size Used by Not tainted
parport_pc 24840 1 (autoclean)
lp 7492 0 (autoclean)
parport 22496 1 (autoclean) [parport_pc lp]
printer 7680 0
usb-storage 60960 0 (unused)
usb-ohci 18184 0 (unused)
usbcore 57472 0 [printer usb-storage usb-ohci]
lsusb
Bus 004 Device 001: ID 0000:0000
Bus 004 Device 002: ID 04a9:1086 Canon, Inc.
Bus 003 Device 001: ID 0000:0000
Bus 003 Device 002: ID 04b8:011f Seiko Epson Corp.
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
lspci
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev 01)
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge)
0000:00:02.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07)
0000:00:02.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07)
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
0000:00:0b.0 USB Controller: NEC Corporation USB (rev 43)
0000:00:0b.1 USB Controller: NEC Corporation USB (rev 43)
0000:00:0b.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
0000:00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV200 QW [Radeon 7500]
L'imprimante est branchée sur une carte contrôleur PCI USB 2.0
Merci d'avance
--
Annabelle
Reply to: