Re: problèmes de cdrom scsi...
On Sun, 2003-11-09 at 13:21, Stanislas Pinte wrote:
> bonjour tout le monde,
Bonjour,
>
> j'ai la config suivante
>
> linux:/home/michel # cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 00 Id: 04 Lun: 00
> Vendor: PLEXTOR Model: CD-R PX-W8220T Rev: 1.02
> Type: CD-ROM ANSI SCSI revision: 02
> linux:/home/michel #
>
> quand je fais "cdrecord scanbus", je vois "No target found".
>
> quelqu'un aurait-il une idée des tests suivants à effectuer pour me
> désembourber?
>
as tu compilé le support des cdroms scsi dans ton noyau ?
moi en 2.6 j'ai ceci :
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
CONFIG_BLK_DEV_SD=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
un lsmod me donne :
Module Size Used by
aic7xxx 175404 0
sd_mod 14752 0
scsi_mod 75428 2 aic7xxx,sd_mod
> linux:/home/michel # ls -l /dev/cdrom
> lrwxrwxrwx 1 root disk 3 2003-10-26 18:55 /dev/cdrom -> sr0
> linux:/home/michel #
>
> linux:/home/michel # ls -l /dev/sr0
> brw------- 1 michel disk 11, 0 2003-03-14 14:07 /dev/sr0
>
> linux:/home/michel # cat /etc/fstab
> /dev/hdb3 / reiserfs defaults 1 1
> /dev/hdb1 /data1 auto noauto,user 0 0
> /dev/hdb2 swap swap pri=42 0 0
> devpts /dev/pts devpts mode=0620,gid=5 0 0
> proc /proc proc defaults 0 0
> usbdevfs /proc/bus/usb usbdevfs noauto 0 0
> /dev/hda4 /media/zip auto noauto,user 0 0
> #/dev/cdrom /media/cdrom auto rw,noauto,user,exec 0
> 0
> /dev/cdrom /media/cdwriter iso9660 noauto,user 0 0
> /dev/dvd /media/dvd auto ro,noauto,user,exec 0 0
> /dev/fd0 /media/floppy auto noauto,user,sync 0 0
>
> Merci mille fois!!!!
>
en esperant que ca peut t'aider.
> Stan
Guillaume
> linux:/home/michel #
> --
> Stanislas Pinte
> stanpinte@fastmail.fm
Reply to: