Pb installation -> VFS: Unable to mount root fs on 00:00
Bonjour,
je tente (vainement) d'installer une DEBIAN 3.0r1 sur un vieux PC Digital
Celebris PII200 (Phoenix BIOS).
L'installtion est toujors OK mais à partir du premier boot, tout se gâte
pour obtenir systématiquement le même message d'erreur suivant :
:
:
PIIX: not 100% native mode: ill probe irqs later
ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfcf8-0xfcff, BIOS settings: hda:pio, hdb:pio
hda: QUATUM TRB850A, ATA DISK drive
hdb: FX400E, ATAPI CDROM drive
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
3c59x.c 18Feb01 Donald Becker and others
http://www.scyld.com/network/vortex.html
pcnet32.C: PCI bios is present, checking for devides...
tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov
eth0: Digital DC210404 tulip rev 35 at 0xf080, 08:00:2B:E6:5B:F4, IRQ 11.
via-rhine.c:v1.08b-LK1.0.1 12/14/2000 Written by Donald Becker
> http://www.scyld.com/network/via-rhine.html
Partition check:
hda: [PTBL] [823/32/63] hda1 hda2
> apm: BIOS version 1.1 Flags 0x03 (Driver version 1.13)
apm : disabled on user request
VFS: Cnnot open root device 00:00
Kernel panic: VFS: Unable to mount root fs on 00:00
J'ai essayé de jouer avec les différents partitionnements possibles :
hda1 : bootable /boot 10Mo
hda2: / 775Mo
hda3: /swap 64Mo
La trace ci-dessus est un exemple sans la première partition /boot.
J'ai également fait des essais avec les paramètres de mon BIOS : mode LBA
ou non des disques, "large disk access" mode [DOS] ou [Autres], utilisation
du MBR ou LILO, etc ...
J'ai également fait quelques essais avec les paramètres au niveau du
prompt LILO mais toujours cette erreur !
Thank's for any help.
=Thierry=
Reply to: