Problème avec efax
Bonjour,
J'essaie en vain depuis quelques jours d'envoyer un simple fichier .txt
sous forme de fax via efax (sous Debian 3.0 et modem Olitec Speed'Com V92
Ready).
J'utilise la commande suivante : # efax -t Tnuméro_du_fax test.txt
La transmission se déroule parfaitement et je reçois bien un fax en aval
mais il est tout-à-fait illisible.
J'ai aussi fait des essais en passant d'abord par l'utilitaire efix mais
avec les mêmes résultats.
Ci-dessous un log détaillé d'une transmission (je n'y détecte rien de
suspect...)
Si quelqu'un a déjà eu plus de succès avec efax, je serai heureux de
l'entendre à ce sujet...
Bernard
> efax: Thu May 22 21:04:18 2003 efax v 0.9a-001114 Copyright 1999 Ed Casas
> efax: Thu May 22 21:04:18 2003 efax v 0.9a-001114 Copyright 1999 Ed Casas
> efax: 04:18 compiled Feb 20 2002 15:22:34
> efax: 04:18 page 1 : test.txt + 0 : 1728x2287 @ 204x196 dpi TEXT/TEXT
> efax: 04:18 argv[0]=efax
> efax: 04:18 argv[1]=-v
> efax: 04:18 argv[2]=ewincmartfx
> efax: 04:18 argv[3]=-t
> efax: 04:18 argv[4]=T026108566
> efax: 04:18 argv[5]=test.txt
> efax: 04:18 opened /dev/modem
> efax: 04:18 command "Q0V1"
> efax: 04:18 waiting 2.0 s
> efax: 04:18 .366 [<CR><LF>OK<CR><LF>]
> efax: 04:18 response "OK"
> efax: 04:18 command "E0"
> efax: 04:18 waiting 5.0 s
> efax: 04:18 .476 [<CR><LF>OK<CR><LF>]
> efax: 04:18 response "OK"
> efax: 04:18 command "I3"
> efax: 04:18 waiting 5.0 s
> efax: 04:18 .586 [<CR><LF>OLITEC Speed'Com V92 Ready<CR><LF>]
> efax: 04:18 .596 [<CR><LF>OK<CR><LF>]
> efax: 04:18 response "OK"
> efax: 04:18 command "+FCLASS=?"
> efax: 04:18 waiting 5.0 s
> efax: 04:18 .726 [<CR><LF>0,1,1.0,2,8,10<CR><LF>]
> efax: 04:18 .736 [<CR><LF>OK<CR><LF>]
> efax: 04:18 response "OK"
> efax: 04:18 command "+FCLASS=2"
> efax: 04:18 waiting 5.0 s
> efax: 04:18 .856 [<CR><LF>OK<CR><LF>]
> efax: 04:18 response "OK"
> efax: 04:18 command "+FMFR?"
> efax: 04:18 waiting 5.0 s
> efax: 04:18 .976 [<CR><LF>OLITEC <CR><LF>]
> efax: 04:18 .986 [<CR><LF>OK<CR><LF>]
> efax: 04:18 response "OK"
> efax: 04:19 command "+FMDL?"
> efax: 04:19 waiting 5.0 s
> efax: 04:19 .106 [<CR><LF>V90 <CR><LF>]
> efax: 04:19 .116 [<CR><LF>OK<CR><LF>]
> efax: 04:19 response "OK"
> efax: 04:19 using OLITEC Speed'Com V92 Ready OLITEC V90 in class 2
> efax: 04:19 command "+FCR=1"
> efax: 04:19 waiting 5.0 s
> efax: 04:19 .236 [<CR><LF>OK<CR><LF>]
> efax: 04:19 response "OK"
> efax: 04:19 command "+FDIS?"
> efax: 04:19 waiting 5.0 s
> efax: 04:19 .256 [<CR><LF>0,5,0,2,0,0,0,0<CR><LF>]
> efax: 04:19 .256 [<CR><LF>OK<CR><LF>]
> efax: 04:19 response "OK"
> efax: 04:19 command "+FLID=" ""
> efax: 04:19 waiting 5.0 s
> efax: 04:19 .296 [<CR><LF>OK<CR><LF>]
> efax: 04:19 response "OK"
> efax: 04:19 dialing Tnuméro_de_fax
> efax: 04:19 command "DTnuméro_de_fax"
> efax: 04:19 waiting 120.0 s
> efax: 04:38 .606 [<CR><LF>+FCON<CR><LF>]
> efax: 04:40 .226 [<CR><LF>+FCSI: " DEFAULTCSID"<CR><LF>]
> efax: 04:40 .546 [<CR><LF>+FDIS: 1,5,0,2,1,0,0,0<CR><LF>]
> efax: 04:40 .656 [<CR><LF>OK<CR><LF>]
> efax: 04:40 response "OK"
> efax: 04:40 remote ID -> " DEFAULTCSID"
> efax: 04:40 connected
> efax: 04:40 command "+FDIS=1,5,0,2"
> efax: 04:40 waiting 3.1 s
> efax: 04:40 .676 [<CR><LF>OK<CR><LF>]
> efax: 04:40 response "OK"
> efax: 04:40 command "+FDT"
> efax: 04:40 waiting 45.0 s
> efax: 04:48 .726 [<CR><LF>+FDCS: 1,5,0,2,0,0,0,0<CR><LF>]
> efax: 04:48 .736 [<CR><LF>CONNECT<CR><LF>]
> efax: 04:48 response "CONNECT"
> efax: 04:48 session 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms
> efax: 04:48 padding to 0 bytes/scan line.
> efax: 04:48 header:[Thu May 22 21:04:18 2003 P. 1]
> efax: 04:48 waiting 30.0 s
> efax: 04:50 .046 [<CR><LF>OK<CR><LF>]
> efax: 04:50 response "OK"
> efax: 04:50 sent 20+64 lines, 1776+0 bytes, 2 s 7104 bps
> efax: 04:50 command "+FET=2"
> efax: 04:50 waiting 20.0 s
> efax: 04:52 .876 [<CR><LF>+FPTS: 1<CR><LF>]
> efax: 04:54 .516 [<CR><LF>+FHNG: 0<CR><LF>]
> efax: 04:55 .136 [<CR><LF>OK<CR><LF>]
> efax: 04:55 response "OK"
> efax: 04:55 read value 0 from " 0"
> efax: 04:55 sent -> test.txt
> efax: 04:55 read value 0 from " 0"
> efax: 04:55 command "Q0V1"
> efax: 04:55 waiting 2.0 s
> efax: 04:55 .247 [<CR><LF>OK<CR><LF>]
> efax: 04:55 response "OK"
> efax: 04:55 command "H"
> efax: 04:55 waiting 5.0 s
> efax: 04:55 .356 [<CR><LF>OK<CR><LF>]
> efax: 04:55 response "OK"
> efax: 04:55 done, returning 0 (success)
Reply to: