ACPI sur linux 2.4.20
Salut ,
Je viens d'installer sur mon portable le noyau 2.4.20 que j'ai patché
pour l'acpi ! parce que ma batterie est acpi. j'ai installé le daemon
acpid (un ps -e | grep acpid me renvoi bien qu'il tourne)et wmacpi une
ptite appli pour window maker pour voir la charge de la batterie mais ca
marche pas! wmacpi me dit que mon pc est toujours connecté au secteur
même quand celui-ci ne l'ai plus ! ;-) (Vous avez dit Bizarre !!!?)
j'ai essayé le prog acpi mais tous ce que j'ai comme info c'est ca:
$ acpi -V
Thermal 1: ok, 81.0 degrees C
AC Adapter 1: off-line
de plus dans les logs j'ai ca :
$ dmesg
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S3 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Disabling VIA memory write queue (PCI ID 0305, rev 80): [55] 3c & 1f -> 1c
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci_bind-0194 [05] acpi_pci_bind : Device 00:00:11.03 not
present in PCI namespace
[ACPI Debug] String: FDC_STA
[ACPI Debug] String: FDC_STA
[ACPI Debug] String: ECP_STA
[ACPI Debug] String: ECP_STA
ACPI: Embedded Controller [EC0] (gpe 1)
[ACPI Debug] String: LINK-A STA
[ACPI Debug] String: LINK-A STA
[ACPI Debug] String: LINK-A STA
[ACPI Debug] String: LINKA-CRS
[ACPI Debug] Buffer: Length 06
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
[ACPI Debug] String: LINK-B STA
[ACPI Debug] String: LINK-B STA
[ACPI Debug] String: LINK-B STA
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11, disabled)
[ACPI Debug] String: LINK-C-STA
[ACPI Debug] String: LINK-C-STA
[ACPI Debug] String: LINK-C-STA
[ACPI Debug] String: LINKA-CRS
[ACPI Debug] Buffer: Length 06
ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
[ACPI Debug] String: LINK-D-STA
[ACPI Debug] String: LINK-D-STA
[ACPI Debug] String: LINK-D-STA
[ACPI Debug] String: LINK-D-CRS
[ACPI Debug] Buffer: Length 06
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
PCI: Probing PCI hardware
[ACPI Debug] String: LINK-B-SRS
[ACPI Debug] Integer: 000000000000000A
[ACPI Debug] String: LINK-B STA
[ACPI Debug] String: LINK-B STA
[ACPI Debug] String: LINK-B-CRS
[ACPI Debug] Buffer: Length 06
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off'
PCI: Cannot allocate resource region 0 of device 00:0a.0
Applying VIA southbridge workaround.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
alors je comprend pas grand chose mais j'ai l'impression qu'il y a
quelque chose qui marche pas ! ;-)
Si quelqu'un peu m'aider !!!??
Merci d'avance !!
Mathieu
Reply to: