Re: sd card niet gedetecteerd
Hi Frank,
On Thu, 2016-02-11 at 12:05 +0100, Frank Voncken wrote:
> Frans van Berckel schreef op do 11-02-2016 om 11:56 [+0100]:
> > Hi Frank,
> >
> > Misschien moet er nog wat geladen worden? Laat dmesg wat zien?
> >
> > # dmesg | grep -i sd
> # dmesg | grep -i sd
> [ 0.000000] ACPI: RSDP 0x0000000077FFD014 000024 (v02 HPQOEM)
> [ 0.000000] ACPI: XSDT 0x0000000077FBF188 00011C (v01 HPQOEM SLIC
> -MPC 00000000 HP 01000013)
> [ 0.000000] ACPI: DSDT 0x0000000077FC1000 01C573 (v02 HPQOEM SLIC
> -MPC 00000000 ACPI 00040000)
> [ 0.000000] ACPI: SSDT 0x0000000077FF9000 0004B7 (v02 HPQOEM
> INSYDE 00001000 ACPI 00040000)
> [ 0.000000] ACPI: SSDT 0x0000000077FF8000 00004B (v02 HPQOEM
> INSYDE 00003000 ACPI 00040000)
> [ 0.000000] ACPI: SSDT 0x0000000077FF0000 0066C2 (v01 HPQOEM
> INSYDE 00001000 ACPI 00040000)
> [ 0.000000] ACPI: MSDM 0x0000000077FEF000 000055 (v03 HPQOEM SLIC
> -MPC 00000001 HP 00040000)
> [ 0.000000] ACPI: SSDT 0x0000000077FE9000 00544E (v02 HPQOEM
> INSYDE 00003000 ACPI 00040000)
> [ 0.000000] ACPI: SSDT 0x0000000077FC0000 0002D4 (v01 HPQOEM
> INSYDE 00000000 ACPI 00040000)
> [ 0.000000] ACPI: SSDT 0x0000000077FBE000 000EA7 (v02 HPQOEM
> INSYDE 00001000 ACPI 00040000)
> [ 0.000000] ACPI: SSDT 0x0000000077FBD000 00019A (v02 HPQOEM
> INSYDE 00001000 ACPI 00040000)
> [ 0.000000] ACPI: SSDT 0x0000000077FBC000 00071B (v02 HPQOEM
> INSYDE 00001000 ACPI 00040000)
> [ 0.000000] ACPI: SSDT 0x0000000077FBB000 000B49 (v02 HPQOEM
> INSYDE 00001000 ACPI 00040000)
> [ 0.000000] ACPI: SSDT 0x0000000077FBA000 000188 (v02 HPQOEM
> INSYDE 00001000 ACPI 00040000)
> [ 0.000000] ACPI: SSDT 0x0000000077FB9000 000E58 (v02 HPQOEM
> INSYDE 00003000 ACPI 00040000)
> [ 0.000000] ACPI: SSDT 0x0000000077FB5000 003F70 (v01 HPQOEM
> INSYDE 00001000 ACPI 00040000)
> [ 0.274775] ACPI: SSDT 0xFFFF8803736AD000 00037F (v02 PmRef
> Cpu0Cst 00003001 INTL 20130117)
> [ 0.275614] ACPI: SSDT 0xFFFF8803737B3000 0005DC (v02 PmRef
> Cpu0Ist 00003000 INTL 20130117)
> [ 0.277138] ACPI: SSDT 0xFFFF8803758B2800 0005AA (v02 PmRef ApIst
> 00003000 INTL 20130117)
> [ 0.278178] ACPI: SSDT 0xFFFF8803758B1E00 000119 (v02 PmRef ApCst
> 00003000 INTL 20130117)
> [ 0.814515] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo
> only pio slum part ems deso sadm sds apst
> [ 1.206887] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks:
> (256 GB/238 GiB)
> [ 1.207043] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks:
> (1.00 TB/931 GiB)
> [ 1.207049] sd 1:0:0:0: [sdb] 4096-byte physical blocks
> [ 1.207296] sd 1:0:0:0: [sdb] Write Protect is off
> [ 1.207305] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> [ 1.207498] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 1.207624] sd 0:0:0:0: [sda] Write Protect is off
> [ 1.207629] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1.207740] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 1.209419] sda: sda1 sda2 sda3
> [ 1.210009] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 1.248729] sdb: sdb1
> [ 1.249872] sd 1:0:0:0: [sdb] Attached SCSI disk
> [ 1.601396] EXT4-fs (sda2): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 2.180966] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
> [ 2.276209] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 2.276403] sd 1:0:0:0: Attached scsi generic sg1 type 0
> [ 2.491947] Adding 12448764k swap on /dev/sda3. Priority:-1
> extents:1 across:12448764k SSFS
> [ 2.536677] FAT-fs (sda1): utf8 is not a recommended IO charset
> for FAT filesystems, filesystem will be case sensitive!
> [ 2.735786] EXT4-fs (sdb1): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 2.822103] parport efivarfs autofs4 ext4 crc16 mbcache jbd2
> sr_mod cdrom sd_mod crc32c_intel ahci libahci xhci_pci libata
> xhci_hcd r8169 mii scsi_mod usbcore usb_common fan thermal i2c_hid
> hid
>
> > # dmesg | grep -i firmware
> # dmesg | grep -i firmware
> [ 0.262314] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
> [ 2.300953] iwlwifi 0000:08:00.0: firmware: failed to load iwlwifi
> -7265D-17.ucode (-2)
> [ 2.300990] iwlwifi 0000:08:00.0: Direct firmware load for iwlwifi
> -7265D-17.ucode failed with error -2
> [ 2.306294] iwlwifi 0000:08:00.0: firmware: direct-loading
> firmware iwlwifi-7265D-16.ucode
> [ 2.306649] iwlwifi 0000:08:00.0: loaded firmware version
> 16.242414.0 op_mode iwlmvm
> [ 2.326553] i915 0000:00:02.0: firmware: direct-loading firmware
> i915/skl_dmc_ver1.bin
> [ 2.492074] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
> [ 2.981592] r8169 0000:07:00.0: firmware: failed to load
> rtl_nic/rtl8168h-2.fw (-2)
> [ 2.981593] r8169 0000:07:00.0: Direct firmware load for
> rtl_nic/rtl8168h-2.fw failed with error -2
> [ 2.981595] r8169 0000:07:00.0 enp7s0: unable to load firmware
> patch rtl_nic/rtl8168h-2.fw (-2)
> Zie je iets vreemds?
Gaat het om sdb1? Wat zegt jou het, dat het niet functioneert? Wat zegt
het als je deze mount? Krijg je dan een foutmelding.
# mount /dev/sdb1 /mnt
# dmesg | tail
# ls -l /mnt
Is de kaart reeds geformeerd?
Met vriendelijke groet,
Frans van Berckel
> >
Reply to: