Re: sd card niet gedetecteerd

To: debian-user-dutch@lists.debian.org
Subject: Re: sd card niet gedetecteerd
From: Frank Voncken <frankvoncken@xs4all.nl>
Date: Thu, 11 Feb 2016 12:05:24 +0100
Message-id: <[🔎] 1455188724.9267.2.camel@xs4all.nl>
In-reply-to: <[🔎] 1455188162.1735.16.camel@xs4all.nl>
References: <[🔎] 1455187522.7346.17.camel@xs4all.nl> <[🔎] 1455188162.1735.16.camel@xs4all.nl>

Frans van Berckel schreef op do 11-02-2016 om 11:56 [+0100]:

Hi Frank,

On Thu, 2016-02-11 at 11:45 +0100, Frank Voncken wrote:

Beste allen,

ik heb in mijn laptop met Skylake een slot voor sd card. Dit blijkt
sd card echter niet te herkennen. Ik keek in lspci:

lspci
00:00.0 Host bridge: Intel Corporation Sky Lake Host Bridge/DRAM
Registers (rev 07)
00:01.0 PCI bridge: Intel Corporation Sky Lake PCIe Controller (x16)
(rev 07)
00:02.0 VGA compatible controller: Intel Corporation Device 191b (rev
06)
00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0
xHCI Controller (rev 31)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point
-H Thermal subsystem (rev 31)
00:15.0 Signal processing controller: Intel Corporation Sunrise Point
-H LPSS I2C Controller #0 (rev 31)
00:15.1 Signal processing controller: Intel Corporation Sunrise Point
-H LPSS I2C Controller #1 (rev 31)
00:16.0 Communication controller: Intel Corporation Sunrise Point-H
CSME HECI #1 (rev 31)
00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA
Controller [AHCI mode] (rev 31)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express
Root Port #5 (rev f1)
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-H PCI Express
Root Port #6 (rev f1)
00:1c.6 PCI bridge: Intel Corporation Sunrise Point-H PCI Express
Root Port #7 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller
(rev 31)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev
31)
00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev
31)
00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 950M]
(rev ff)
07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
08:00.0 Network controller: Intel Corporation Wireless 7265 (rev 61)
09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd.
Device 522a (rev 01)

Ik zie niks over sd card reader. lsusb geeft ook geen soelaas (of ik
moet iets over het hoofd hebben gezien):

lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 138a:0050 Validity Sensors, Inc. Swipe
Fingerprint Sensor
Bus 001 Device 003: ID 8087:0a2a Intel Corp. 
Bus 001 Device 002: ID 05c8:0379 Cheng Uei Precision Industry Co.,
Ltd (Foxlink) 
Bus 001 Device 005: ID 0101:0007  
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Wat kan ik nu doen? Weer nieuwe uitdaging voor jullie :-)


Misschien moet er nog wat geladen worden? Laat dmesg wat zien?

# dmesg | grep -i sd

# dmesg | grep -i sd

[ 0.000000] ACPI: RSDP 0x0000000077FFD014 000024 (v02 HPQOEM)

[ 0.000000] ACPI: XSDT 0x0000000077FBF188 00011C (v01 HPQOEM SLIC-MPC 00000000 HP 01000013)

[ 0.000000] ACPI: DSDT 0x0000000077FC1000 01C573 (v02 HPQOEM SLIC-MPC 00000000 ACPI 00040000)

[ 0.000000] ACPI: SSDT 0x0000000077FF9000 0004B7 (v02 HPQOEM INSYDE 00001000 ACPI 00040000)

[ 0.000000] ACPI: SSDT 0x0000000077FF8000 00004B (v02 HPQOEM INSYDE 00003000 ACPI 00040000)

[ 0.000000] ACPI: SSDT 0x0000000077FF0000 0066C2 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)

[ 0.000000] ACPI: MSDM 0x0000000077FEF000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)

[ 0.000000] ACPI: SSDT 0x0000000077FE9000 00544E (v02 HPQOEM INSYDE 00003000 ACPI 00040000)

[ 0.000000] ACPI: SSDT 0x0000000077FC0000 0002D4 (v01 HPQOEM INSYDE 00000000 ACPI 00040000)

[ 0.000000] ACPI: SSDT 0x0000000077FBE000 000EA7 (v02 HPQOEM INSYDE 00001000 ACPI 00040000)

[ 0.000000] ACPI: SSDT 0x0000000077FBD000 00019A (v02 HPQOEM INSYDE 00001000 ACPI 00040000)

[ 0.000000] ACPI: SSDT 0x0000000077FBC000 00071B (v02 HPQOEM INSYDE 00001000 ACPI 00040000)

[ 0.000000] ACPI: SSDT 0x0000000077FBB000 000B49 (v02 HPQOEM INSYDE 00001000 ACPI 00040000)

[ 0.000000] ACPI: SSDT 0x0000000077FBA000 000188 (v02 HPQOEM INSYDE 00001000 ACPI 00040000)

[ 0.000000] ACPI: SSDT 0x0000000077FB9000 000E58 (v02 HPQOEM INSYDE 00003000 ACPI 00040000)

[ 0.000000] ACPI: SSDT 0x0000000077FB5000 003F70 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)

[ 0.274775] ACPI: SSDT 0xFFFF8803736AD000 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20130117)

[ 0.275614] ACPI: SSDT 0xFFFF8803737B3000 0005DC (v02 PmRef Cpu0Ist 00003000 INTL 20130117)

[ 0.277138] ACPI: SSDT 0xFFFF8803758B2800 0005AA (v02 PmRef ApIst 00003000 INTL 20130117)

[ 0.278178] ACPI: SSDT 0xFFFF8803758B1E00 000119 (v02 PmRef ApCst 00003000 INTL 20130117)

[ 0.814515] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst

[ 1.206887] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)

[ 1.207043] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)

[ 1.207049] sd 1:0:0:0: [sdb] 4096-byte physical blocks

[ 1.207296] sd 1:0:0:0: [sdb] Write Protect is off

[ 1.207305] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00

[ 1.207498] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.207624] sd 0:0:0:0: [sda] Write Protect is off

[ 1.207629] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 1.207740] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.209419] sda: sda1 sda2 sda3

[ 1.210009] sd 0:0:0:0: [sda] Attached SCSI disk

[ 1.248729] sdb: sdb1

[ 1.249872] sd 1:0:0:0: [sdb] Attached SCSI disk

[ 1.601396] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)

[ 2.180966] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro

[ 2.276209] sd 0:0:0:0: Attached scsi generic sg0 type 0

[ 2.276403] sd 1:0:0:0: Attached scsi generic sg1 type 0

[ 2.491947] Adding 12448764k swap on /dev/sda3. Priority:-1 extents:1 across:12448764k SSFS

[ 2.536677] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!

[ 2.735786] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)

[ 2.822103] parport efivarfs autofs4 ext4 crc16 mbcache jbd2 sr_mod cdrom sd_mod crc32c_intel ahci libahci xhci_pci libata xhci_hcd r8169 mii scsi_mod usbcore usb_common fan thermal i2c_hid hid

# dmesg | grep -i firmware

# dmesg | grep -i firmware

[ 0.262314] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored

[ 2.300953] iwlwifi 0000:08:00.0: firmware: failed to load iwlwifi-7265D-17.ucode (-2)

[ 2.300990] iwlwifi 0000:08:00.0: Direct firmware load for iwlwifi-7265D-17.ucode failed with error -2

[ 2.306294] iwlwifi 0000:08:00.0: firmware: direct-loading firmware iwlwifi-7265D-16.ucode

[ 2.306649] iwlwifi 0000:08:00.0: loaded firmware version 16.242414.0 op_mode iwlmvm

[ 2.326553] i915 0000:00:02.0: firmware: direct-loading firmware i915/skl_dmc_ver1.bin

[ 2.492074] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS

[ 2.981592] r8169 0000:07:00.0: firmware: failed to load rtl_nic/rtl8168h-2.fw (-2)

[ 2.981593] r8169 0000:07:00.0: Direct firmware load for rtl_nic/rtl8168h-2.fw failed with error -2

[ 2.981595] r8169 0000:07:00.0 enp7s0: unable to load firmware patch rtl_nic/rtl8168h-2.fw (-2)

Zie je iets vreemds?

Frank

Reply to:

Follow-Ups:
- Re: sd card niet gedetecteerd
  - From: Frans van Berckel <fberckel@xs4all.nl>

References:
- sd card niet gedetecteerd
  - From: Frank Voncken <frankvoncken@xs4all.nl>
- Re: sd card niet gedetecteerd
  - From: Frans van Berckel <fberckel@xs4all.nl>

Prev by Date: Re: sd card niet gedetecteerd
Next by Date: Re: sd card niet gedetecteerd
Previous by thread: Re: sd card niet gedetecteerd
Next by thread: Re: sd card niet gedetecteerd
Index(es):
- Date
- Thread