Re: [Debian] dail on demand unter woody
Am Donnerstag, 16. August 2001 10:42 schrieb Ulf Wetzker:
> hmmm ich habe schon wieder ein problem mir dsl... :(
> mittlerweile geht eigendlich alles aber da ich eine flatrate hab
> waette ich gerne dial on demand und es geht einfach mal nicht wie die
> das auf www.adsl4linux beschrieben haben :((((
>
> kann mir somit jemand helfen ?? ich will einfach nur dial on demand
> unter woody (also pppoe 3.0) zu laufen bekommen !
>
> schon mal danke
> cu ulf
Hi Ulf,
hast Du auch den Script in /etc/ppp/peers so angepasst, daß demand und idle
auskommentiert bleiben? (sehe unsten)
dsl-provider:
# Configuration file for PPP, using PPP over Ethernet
# to connect to a DSL provider.
#
# See the manual page pppd(8) for information on all the options.
##
# Section 1
#
# Stuff to configure...
# MUST CHANGE: Uncomment the following line, replacing the user@provider.net
# by the DSL user name given to your by your DSL provider.
# (There should be a matching entry in /etc/ppp/pap-secrets with the
password.)
#user myusername@myprovider.net
# Use the pppoe program to send the ppp packets over the Ethernet link
# This line should work fine if this computer is the only one accessing
# the Internet through this DSL connection. This is the right line to use
# for most people.
pty "pppoe -I eth0 -T 80"
# If the computer connected to the Internet using pppoe is also being used
# by other computers as a gateway to the Internet, use the following
# line instead:
#pty "pppoe -I eth0 -T 80 -m 1452"
# An even more conservative version of the previous line, if things still
# don't work using -m 1452...
#pty "pppoe -I eth0 -T 80 -m 1412"
# The following two options should work fine for most DSL users.
# Assumes that your IP address is allocated dynamically
# by your DSL provider...
noipdefault
# Comment out if you already have the correct default route installed
defaultroute
##
# Section 2
#
# Uncomment if your DSL provider charges by minute connected
# and you want to use demand-dialing.
#
# Disconnect after 300 seconds (5 minutes) of idle time.
demand
idle 300
##
# Section 3
#
# You shouldn't need to change these options...
hide-password
lcp-echo-interval 20
lcp-echo-failure 3
# Override any connect script that may have been set in /etc/ppp/options.
connect /bin/true
noauth
persist
mtu 1492
Der Rest mußt natürlich auch noch angepasst werden...
Hoffentlich klappt's!
Grüße
Martin
--
-----------------------------------------------------------
Um sich aus der Liste auszutragen schicken Sie bitte eine
E-Mail an debian-user-de-request@lehmanns.de die im Subject
"unsubscribe <deine_email_adresse>" enthaelt.
Bei Problemen bitte eine Mail an: Jan.Otto@Lehmanns.de
-----------------------------------------------------------
872 eingetragene Mitglieder in dieser Liste.
Reply to: