Re: [Debian]: Riva TNT und slink?
Quoting Marc Haber (Marc.Haber-lists@gmx.de):
>
> Ein neuer Rechner hat einen Riva TNT. Dieser Chip wird laut
> www.xfree86.org ab xfree 3.3.3 unterstützt, slink hat xfree 3.3.2.
> Volle Unterstützung bekomme ich also nicht.
>
xserver-deb-binaries 3.3.3 fuer alle moeglichen Karten sind auf der
Debian 2.1 von Lehmanns dritte CD (Zusaetzliche Pakete) im Verzeichnis
/extras
> Mit welchem Server kann ich den Riva TNT am besten ansprechen? Als
soweit ich mitbekommen habe, tut das der xserver-svga.
Man soll ihn aber nicht mit XF86Setup konfigurieren,
sondern konsole-treu mit xf86config.
--------------------------------------------------------------------
hier einschlaegige Zitate dazu von XFree86.org:
Is a server for Riva 128, 128zx or Riva TNT based cards available?
Support for all these NVIDIA chipsets is included in XFree86-3.3.3.1.
This server was partly implemented by NVIDIA and
now follows the Open Source guidelines.
-------------
Information for NVidia NV1 / SGS-Thomson STG2000, Riva 128 and Riva TNT Users
David McKay, Dirk Hohndel
5 November 1998
1. Supported hardware
This driver supports good acceleration for both the NV1/STG2000 as well as the
Riva128. It is known to work on PCI and AGP versions of the Riva128. The Riva
TNT was added to this driver and is not yet as well accelerated as it could be.
Still, the server is very usable.
2. Notes
On the NV1/STG2000, the driver does not support the virtual desktop features
of xfree86. This is because the NV1 does not have the necessary hardware
to support this feature. If you want to change resolution you will have
to modify your config file. Comment out all but the mode you wish to use.
The generic VGA16 server will not work with the NV1. For this reason
XF86Setup cannot be used to configure the server for NV1 based cards.
Use xf86config instead. Select `Diamond Edge 3D' as your board, and
select only ONE mode for each of 8bpp and 16bpp.
Do not select a virtual desktop. Also, make sure you don't select a
RAMDAC or clock chip. This does not apply if you own a Riva128 or
RIVA TNT card, as the VGA16 server works just fine on that.
Both the NV1 and the Riva128 only support a 555 RGB Weight in 16 bpp,
the hardware does not do 565. If you run into problems with some window
managers in 16bpp, try putting a Weight 555 in the Display section.
24 bpp is not supported.
....
------------------------------------------------
Um sich aus der Liste auszutragen schicken Sie
bitte eine E-Mail an majordomo@jfl.de die im Body
"unsubscribe debian-user-de <deine emailadresse>"
enthaelt.
Bei Problemen bitte eine Mail an: Jan.Otto@jfl.de
------------------------------------------------
Anzahl der eingetragenen Mitglieder: 756
Reply to: