[Debian]: zusätzliche infos zu umstieg auf 2.2.x (sound)
hallo nochmal ;)
ich hab grad nochma den kernel mit festem sound-support kompiliert.
nun erhalte ich beim booten:
<booten>
sb: Interrupt test on IRQ5 failed - Probable IRQ conflict
<Sound Blaster 16 (4.16)> at 0x220 irq 5 dma 1,5
<Yamaha OPL3> at 0x388
AWE32: not detected (obwohl in kernel-doku stand für awe64)
später folgt was von "fatal error /etc/isapnp.conf"
<mpg123>
wenn man nun probiert mmit mpg123 was abzuspielen kommt:
dma/irq error (siehe oben)
<interrupts>
cat /proc/interrupts:
CPU0
0: 79950 XT-PIC timer
1: 3469 XT-PIC keyboard
2: 0 XT-PIC cascade
4: 19573 XT-PIC serial
5: 0 XT-PIC soundblaster
8: 2 XT-PIC rtc
13: 1 XT-PIC fpu
14: 4233 XT-PIC aic7xxx
15: 94 XT-PIC eth0
NMI: 0
ein cat /dev/sndstat ergibt:
OSS/Free:3.8s2++-971130
Load type: Driver compiled into kernel
Config options: 0
Installed drivers:
Type 1: OPL-2/OPL-3 FM
Type 26: MPU-401 (UART)
Type 2: Sound Blaster
Type 29: Sound Blaster PnP
Type 7: SB MPU-401
Card config:
Sound Blaster at 0x220 irq 5 drq 1,5
(SB MPU-401 at 0x330 irq 5 drq 0)
OPL-2/OPL-3 FM at 0x388 drq 0
Audio devices:
0: Sound Blaster 16 (4.16) (DUPLEX)
Synth devices:
Type 26: MPU-401 (UART)
Type 2: Sound Blaster
Type 29: Sound Blaster PnP
Type 7: SB MPU-401
Card config:
Sound Blaster at 0x220 irq 5 drq 1,5
(SB MPU-401 at 0x330 irq 5 drq 0)
OPL-2/OPL-3 FM at 0x388 drq 0
Audio devices:
0: Sound Blaster 16 (4.16) (DUPLEX)
Synth devices:
0: Yamaha OPL3
Midi devices:
Timers:
0: System clock
Mixers:
0: Sound Blaster
aber funktioniern tut es leider immmer noch nicht
cya
daniel
------------------------------------------------
Um sich aus der Liste auszutragen schicken Sie
bitte eine E-Mail an majordomo@jfl.de die im Body
"unsubscribe debian-user-de <deine emailadresse>"
enthaelt.
Bei Problemen bitte eine Mail an: Jan.Otto@jfl.de
------------------------------------------------
Anzahl der eingetragenen Mitglieder: 742
Reply to: