[Debian]: xserver, Probleme mit man pages , hardware infos
Hallo Linuxkundige,
ich habe vor ein paar Wochen versucht die debian 2.0 Version
von den JFL-CD bei mir zu installieren. Leider kann meine
Grafikkarte (hercules terminator 128/3D) nicht mit den xservern.
Ich habe dann versucht mit svga oder vga16 einen Xserver einzurichten,
leider bekomme ich mit XF86Setup nur nachfolgende Datei hin.
Ueber jeden Tip waere ich dankbar, wie ich zu einer 800x600 Aufloesung
komme.
# File generated by xf86config.
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
EndSection
Section "ServerFlags"
EndSection
Section "Keyboard"
Protocol "Standard"
AutoRepeat 500 5
XkbKeymap "xfree86(de)"
EndSection
Section "Pointer"
Protocol "PS/2"
Device "/dev/psaux"
EndSection
Section "Monitor"
Identifier "Peacock"
VendorName "Peacock"
ModelName "15"
HorizSync 31.5 - 65.0
# HorizSync 31.5 - 57.0
VertRefresh 50-90
Modeline "640x400" 25.175 640 664 760 800 400 409 411 450
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
Modeline "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817 Interlace
Modeline "640x400" 31.5 640 672 736 832 400 401 404 445 -HSync +VSync
Modeline "640x480" 31.5 640 680 720 864 480 488 491 521
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync
Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync
Modeline "640x400" 36 640 696 752 832 480 481 484 509 -HSync -VSync
ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 Interlace
Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync
Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync
Modeline "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync
Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892 -HSync -VSync
Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync
Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace
Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync
Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823
Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync
Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908
Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync
Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064
Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync
Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync
Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync
Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync
ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
Modeline "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync
Modeline "512x384" 22 512 528 592 640 384 385 388 404 -HSync -VSync
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.
# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300" 18 400 416 448 512 300 301 302 312 Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300" 20 400 416 480 528 300 301 303 314 Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300" 25 400 424 488 520 300 319 322 333 Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300" 25 480 496 576 632 300 301 303 314 Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan
EndSection
# Standard VGA Device:
Section "Device"
Identifier "Generic VGA"
VendorName "Unknown"
BoardName "Unknown"
Chipset "generic"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Sample Device for accelerated server:
Section "Device"
Identifier "hercules"
VendorName "hercules"
BoardName "terminator"
#VideoRam 8192
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# The Colour SVGA server
Section "Screen"
Driver "svga"
# Use Device "Generic VGA" for Standard VGA 320x200x256
#Device "Generic VGA"
Device "hercules"
Monitor "Peacock"
Subsection "Display"
Depth 8
# Omit the Modes line for the "Generic VGA" device
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
# Use Virtual 320 200 for Generic VGA
EndSubsection
Subsection "Display"
Depth 16
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "640x480" "800x600" "1024x768"
ViewPort 0 0
EndSubsection
EndSection
# The 16-color VGA server
Section "Screen"
Driver "vga16"
Device "Generic VGA"
Monitor "Peacock"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
Virtual 800 600
EndSubsection
EndSection
# The Mono server
Section "Screen"
Driver "vga2"
Device "Generic VGA"
Monitor "Peacock"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
Virtual 800 600
EndSubsection
EndSection
# The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64)
Section "Screen"
Driver "accel"
Device "hercules"
Monitor "Peacock"
Subsection "Display"
Depth 8
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "640x480" "800x600" "1024x768"
ViewPort 0 0
EndSubsection
EndSection
************ Hier nun das script vom startx-Lauf
Script started on Sat Dec 19 18:18:42 1998
debian:~# startx
XFree86 Version 3.3.2 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: March 2 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.32 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 0):
NV1, STG2000, RIVA128, ET4000, ET4000W32, ET4000W32i,
ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100,
et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33,
gvga, ati, sis86c201, sis86c202, sis86c205, tvga8200lx, tvga8800cs,
tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i,
tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi,
tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
3dimage975, 3dimage985, clgd5420, clgd5422, clgd5424, clgd5426,
clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480,
clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235,
clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, ncr77c22, ncr77c22e,
cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, oti067, oti077,
oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401,
cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv,
ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_virge,
s3_svga, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545,
ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct64200,
ct64300, generic
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(de)" (overrides other XKB settings)
(**) Mouse: type: PS/2, device: /dev/psaux, buttons: 3
(**) SVGA: Graphics device ID: "hercules"
(**) SVGA: Monitor ID: "Peacock"
(--) SVGA: Mode "640x480" needs vert refresh rate of 100.02 Hz. Deleted.
(--) SVGA: Mode "800x600" needs vert refresh rate of 100.03 Hz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/"
(--) SVGA: PCI: S3 Unknown chipset (0x8904) rev 1, Memory @ 0xe0000000
(--) SVGA: Unknown S3 chipset: chip_id = 0x8904 rev. 1
(--) SVGA: chipset: generic
(--) SVGA: videoram: 64k
(--) SVGA: clocks: 25.18
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
(--) SVGA: Using builtin driver modes
(--) SVGA: Builtin Mode: 320x200
(--) SVGA: Virtual resolution set to 320x204
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb -xkm -m de -em1 "The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp "> " -eml "Errors from xkbcomp are not fatal to the X server" keymap/xfree86 compiled/xfree86.xkm'
waiting for X server to shut down FreeFontPath: FPE "/usr/X11R6/lib/X11/fonts/misc/" refcount is 2, should be 1; fixing.
debian:~# exit
exit
Script done on Sat Dec 19 18:19:10 1998
Neben meinem grossen Problem habe ich noch eine kleine Fragen:
Wie kann ich bei einem PentiumII auf einem Gigabyte Board die CPU
Temperatur und die Luefterdaten unter Linux kontrollieren?
Vielen Dank fuer eure Hilfe
frohes Fest und guten Rutsch
Thomas
------------------------------------------------
Um sich aus der Liste auszutragen schicken Sie
bitte eine E-Mail an majordomo@jfl.de die im Body
"unsubscribe debian-user-de <deine emailadresse>"
enthaelt.
Bei Problemen bitte eine Mail an: Jan.Otto@jfl.de
------------------------------------------------
Anzahl der eingetragenen Mitglieder: 624
Reply to: