[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Updated installation images for Debian Ports 2019-05-09


I just uploaded updated installation images 2019-05-09 for the
following Debian Ports architectures:

 * alpha
 * hppa
 * ia64
 * m68k
 * powerpc
 * ppc64
 * sh4
 * sparc64

I uploaded both CD images [1] as well as netboot images [2].

Please test those images and report back over the mailing list for
the corresponding architecture.

Known issues:

 * alpha
   - There have been reports about missing firmware for storage devices.
     The firmware required for these devices is located in the
     "firmware-linux" and "firmware-linux-nonfree" packages but currently
     don't have a floppy driver in debian-installer to load additional
     firmware. I will figure out how to build CD images including firmware
     similar to the images available for i386 and amd64.
   - The images now includes the pata-modules package so users previously
     missing PATA drivers should be able to install their machines now.
 * hppa
   - No known issues and changes.
 * ia64
   - The kernel might be unstable during install
     (try passing "hardened_usercopy=off" at the boot prompt,
      e.g. "install hardened_usercopy=off").
   - If the machine locks up during boot with a radeon GPU,
     try passing "modprobe_blacklist=radeon nomodeset".
   - The installer has been switched to boot using GRUB now,
     ELILO is no longer available.
 * m68k
   - The drivers for IDE hardware may have to be loaded manually, e.g.:
     + modprobe pata_gayle
     + modprobe pata_falcon
   - There is no automatic installation of the bootloader yet,
     users have to boot the kernel and initrd manually after
 * powerpc/ppc64
   - The bootloader installation still defaults to Yaboot and
     is being switched to GRUB for IBM POWER and PowerMacs,
     please report any issues you find.
   - Unfortunately, upgrading the GRUB package will currently
     render PowerMacs unbootable. See this thread for more:
   - On some machines, the fans might produce a lot of noise,
     this can be addressed by manually the windfarm kernel
     + modprobe windfarm_core
   - The installer has been switched to boot using GRUB now,
     Yaboot is still in the archives but will be removed
 * sh4
   - There is no CD image, installation has to be performed
     using the debian-installer images.
   - Currently supported targets are Renesas SH-7785LCR and
     SH-7751R, the latter should be identical to qemu-sh4.
   - debian-installer for sh4 is completely untested, please
     test with QEMU and report back. 
   - The filenames for kernel and initrd still contain an
      old kernel version. This can be ignored.
 * sparc64
   - Installation over a serial console is currently broken
     on sparc64 due to a bug in the rootskel package
     (can also be considered a kernel bug), see: #926539.
     Use any image before 2019-04-06 as workaround.
   - The installer has been switched to boot using GRUB now,
     SILO is no longer available.


When reporting issues or bugs, please include the syslog
from your installation in the bug report/mail. The log
file can be access when switching to another console using
<Alt>+<Cursor> for normal installations or <Ctrl>+<a>+<n>
when installing over a serial console. I also need to know
what hardware was used, which installation steps (normal
vs. expert) and which image was used.

I am currently collecting bug reports but cannot push the fixes
immediately as the imminent Debian Buster release means that
debian-installer and components are effectively frozen.


> [1] https://cdimage.debian.org/cdimage/ports/2019-05-09/
> [2] https://cdimage.debian.org/cdimage/ports/debian-installer/

 .''`.  John Paul Adrian Glaubitz
: :' :  Debian Developer - glaubitz@debian.org
`. `'   Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
  `-    GPG: 62FF 8A75 84E0 2956 9546  0006 7426 3B37 F5B5 F913

Reply to: