mike wrote:
I'm doing a serial port install on a Sun e220r using a db25 to rj45 adapter and then an rj45 to db9 adapter (with a cat-6 cable in between). Does anyone know what speed the serial port on the client needs to be set to? Right now I'm using these settings: TERM= /dev/ttyS0 Speed= 9600 parity = none 8-bits with 1 stopbit no flow control Thanks much for help
By default those are the correct settings. That cable setup probably needs a null modem adapter at one end though if the db25 and db9 adapters that you're using are the standard silver ones with a Sun part number on them. Or, you can try recrimping a RJ45 cable that,
instead of straight through, has conductors 3 and 6 swapped at one end. -Brian