Hi, John Knight píše v Čt 17. 01. 2008 v 16:21 -0500: > I didn't know ubuntu released 7.10 yet for sparc. groovy > > anyhoo, i noticed that you said you changed the driver to glint. in the > following section: > > "BusID "PCI:2:0:0" > > under the device portion of your xorg.conf file; is that pointing to the > right pci bus id? unless you generated a new xorg.conf file, that might > be where the original video card was located. it's just very strange > that it says it can't find the device. > > -John > the file was generated by dpkg-reconfigure when I try to run lspci and/or Xorg -scanpci to find out, which PCI number to use, I'm confused lspci gives me [1] [...] 0001:00:00.0 Host bridge [0600]: 3DLabs Unknown device [3d3d:0032] (rev 01) 0001:02:00.0 VGA compatible controller [0300]: 3DLabs Unknown device [3d3d:0032] (rev 01) (prog-if 00 [VGA]) where Xorg -scanpci returns [2] (2:0:0) PLX Technology, Inc. PEX 8532 Versatile PCI Express Switch (3:1:0) PLX Technology, Inc. PEX 8532 Versatile PCI Express Switch (3:2:0) PLX Technology, Inc. PEX 8532 Versatile PCI Express Switch (3:3:0) PLX Technology, Inc. PEX 8532 Versatile PCI Express Switch (3:8:0) PLX Technology, Inc. PEX 8532 Versatile PCI Express Switch (3:9:0) PLX Technology, Inc. PEX 8532 Versatile PCI Express Switch (4:0:0) ALi Corporation M5249 HTT to PCI Bridge (5:28:0) unknown card (0x10b9/0x5237) using a ALi Corporation USB 1.1 Controller (5:28:1) unknown card (0x10b9/0x5237) using a ALi Corporation USB 1.1 Controller (5:28:2) unknown card (0x10b9/0x5237) using a ALi Corporation USB 1.1 Controller (5:28:3) unknown card (0x10b9/0x5238) using a ALi Corporation USB 2.0 Controller (5:29:0) unknown card (0x10b9/0x5455) using a ALi Corporation M5455 PCI AC-Link Controller Audio Device (5:31:0) unknown card (0x10b9/0x5229) using a ALi Corporation M5229 IDE (6:0:0) Broadcom EPB PCI-Express to PCI-X Bridge (7:4:0) unknown card (0x108e/0x1678) using a Broadcom Corporation NetXtreme BCM5715 Gigabit Ethernet (7:4:1) unknown card (0x108e/0x1678) using a Broadcom Corporation NetXtreme BCM5715 Gigabit Ethernet (10:0:0) Intel Corporation 41210 [Lanai] Serial to Parallel PCI Bridge (A-Segment Bridge) (10:0:2) Intel Corporation 41210 [Lanai] Serial to Parallel PCI Bridge (B-Segment Bridge) (11:1:0) unknown card (0x1000/0x3020) using a LSI Logic / Symbios Logic SAS1064 PCI-X Fusion-MPT SAS Also I'm not quite sure with the glint driver anymore. It looks like I would need some proprietary wildcat driver :-( But first things first: How to find out, which PCI is supposed to go to my xorg.conf ? Thanks Jachym [1] http://les-ejk.cz/tmp/lspci.txt [2] http://les-ejk.cz/tmp/xorg.scanpci.txt -- Jachym Cepicky e-mail: jachym.cepicky@gmail.com URL: http://les-ejk.cz GPG: http://www.les-ejk.cz/pgp/jachym_cepicky-gpg.pub
Attachment:
signature.asc
Description: Toto je =?UTF-8?Q?digit=C3=A1ln=C4=9B?= =?ISO-8859-1?Q?_podepsan=E1?= =?UTF-8?Q?_=C4=8D=C3=A1st?= =?ISO-8859-1?Q?_zpr=E1vy?=