[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: 2.6.15-1-sparc64 issues on blade 100

On Wed, 8 Feb 2006, Luis F. Ortiz wrote:

With regard to the video problems, you are welcome to try my fix to the problem. There were two problems I found, a missing flag (M64F_SDRAM_MAGIC_PLL) and a bad clock rate (230 instead of 235). Try applying some variation of the following patch. This fix went to 2.6.16-rc1, but was partially overwritten by a subsequent patch. Hopefully the full fix will reappear shortly, and then the debian folks will pick it up.

If it does not fix your problem let me know; it means there is likely something wrong with my setup as well, and I just don't know it. If it does help, let me know so I can try harder to get it in for 2.6.16 final.

-- Luis, who likes his SB100

Right, I've just checked and the code in 2.6.16-rc2 has the correct flags, but frequency is still set to 230 instead of correct 235 (*sigh*). I'll get a patch into svn. Updated kernels should be available from my site tomorrow.

Best regards,

Jurij Smakov                                        jurij@wooyd.org
Key: http://www.wooyd.org/pgpkey/                   KeyID: C99E03CC

Reply to: