Re: unable to boot on the netinst CD
Hi,
If i use the testing-netinst the installation works fine if I install
the stable release. But when I boot up I've got the same errors with
the partition check as before. (see below)
If I try to install the Etch version with the installer it stops at
'couldn't find debs for ipchains'.
Any clues ?
thanks,
2005/8/5, Pooly <pooly7@gmail.com>:
> Hi,
>
> I've removed two stick (out of 4) of memory, and try to change their
> slot (from 0-1 to 2-3), but neither attempt worked. I tried
> with/without ramdisk_size=16000.
> I believe the :
> Partition check:
> hda:end_request: I/O error, dev 03:00 (hda), sector 0
> end_request: I/O error, dev 03:00 (hda), sector 2
> end_request: I/O error, dev 03:00 (hda), sector 4
> end_request: I/O error, dev 03:00 (hda), sector 6
> end_request: I/O error, dev 03:00 (hda), sector 8
> end_request: I/O error, dev 03:00 (hda), sector 10
> end_request: I/O error, dev 03:00 (hda), sector 12
> end_request: I/O error, dev 03:00 (hda), sector 14
>
> Should not be worring because Linux is not yet installed on this disk.
> (still an old solaris)
>
> 2005/8/5, Frederic Lehobey <Frederic.Lehobey@free.fr>:
> > Hi,
> >
> > On Thu, Aug 04, 2005 at 03:20:17PM +0100, Pooly wrote:
> > >
> > > I'm trying to install a Debian 3.1 on an Ultra5. When I boot on the CD
> > > (3.1r0a-sparc-netinst) I end up with a kernel panic with :
> > > Ramdisk : couldn't find valid RAM disk image starting at 0
> > > Cramfs: wrong magic
> > >
> > > I've google a bit, and I've found nothing which works.
> > > Any hints on this ?
> >
> > I do not believe it is enough so solve your problem, but beware of
> > #305230.
> >
> > Best regards,
> > Frederic Lehobey
> >
> >
> > -----BEGIN PGP SIGNATURE-----
> > Version: GnuPG v1.4.1 (GNU/Linux)
> >
> > iD8DBQFC8y6SKJ61IisCKVERAsZrAJ9o6jin/HAfRZXmRTSJR6mbYvf2UQCgzw9w
> > hadPKdaBEKPrFqsZhuMsY3U=
> > =gLvQ
> > -----END PGP SIGNATURE-----
> >
> >
> >
>
>
> --
> --
> Webzine Rock : http://www.w-fenec.org/
>
--
Webzine Rock : http://www.w-fenec.org/
Reply to: