RE: Got sound going on a U60 debian smp
Steve,
I'm having a similar problem with my Ultra10+Sarge (2.4.26).
I've loaded CS4231 module in modconf and it works fine with mpg123, but when
I load X ( KDE ), I receive the message :
"Sound server fatal error:
AudioSubSystem::handleO: write failed
Len=-a.can_write=8192,errno=11(Resource temporarily
unavailable)
This might be a sound hardware/driver specific problem ( see aRts FAQ)"
Do you know what's happening ?
Best Regards,
Marcelo Lopes
-----Original Message-----
From: Steve Pacenka [mailto:s.pacenka@verizon.net]
Sent: quarta-feira, 10 de novembro de 2004 00:02
To: Carl Wharehinga
Cc: debian-sparc@lists.debian.org
Subject: Re: Got sound going on a U60 debian smp
> after checking modprobe -v cs4231
>
> I got some errors showing that this wasn't working at all ... (missing
> symbols etc..)
I just went back to Debian's 2.4.27-1-sparc64-smp on my U60 (normally I use
a 2.6.8 to get USB2), and the cs4231 module loads and works. I loaded it
with modprobe then reran /etc/init.d/audioctl start .
> I then found some info on the module you suggested cs4231 and followed
> a couple of steps to get my card producing output
>
> rmmod soundcore
> insmod audio
> insmod cs4231
That looks good.
> audioctl -f /dev/audio -w play.port=headphone
I don't think /dev/audio is relevant here.
Maybe try
audioctl -w play.port=headphone
There are examples of how to set PARAMS in /etc/default/audioctl . The
initscript for audioctl runs something like
audioctl -nw $PARAMS
and PARAMS is set in /etc/default/audioctl . Not too complicated.
> lsmod output showed
>
> Module Size Used by Not tainted
> cs4231 21936 0
> audio 23744 1 [cs4231]
> ac97_codec 16752 0 (unused)
> openprom 5312 0 (autoclean)
> lp 8728 0 (autoclean)
> parport 34064 0 (autoclean) [lp]
> autofs4 10236 0 (unused)
> hid 17336 0 (unused)
Get rid of ac97_codec .
> I was wondering what exactly to put in here and how this works I still
> have to track down some documentation for this but I found someone
> elses config that had the following in it
>
> char-major-14 soundcore
> alias sound-slot-0 cs4232
> alias sound-service-0-0 sound # mixer
> alias sound-service-0-3 sound # /dev/dsp & /dev/audio alias
> sound-service-0-6 sound # /dev/sndstat options cs4232 io=0x530 irq=5
> dma=1 dma2=0 # numbers may vary
You shouldn't need add any of that for the built-in sound, if you include
cs4231 in /etc/modules .
> This is probably wrong for my setup but I ithink I need to understand
> whats going on before I go down this road.
>
> like wise for this recomendation
>
> Have you set the PARAMS variable
>
> PARAMS="play.port=line_out"
>
> in /etc./default/audioctl ?
>
> Thanks for this info I will try to find some documentation on these
> files and parameters and go from there.
The file /etc/default/audioctl contains many instructive comments.
>
> I am now working on the following.
>
> 1. Get the sound card playing raw at the correct level.
> 2. get xmms working with the sound card ... Currently raw files
> work but I think I am having issues using OSS pointing at /dev/audio
> (producing noise not music (could be sending wrong format to the
> device)
If /dev/audio doesn't work, maybe /dev/dsp will.
Try alsaplayer instead of xmms. I have had mixed results with xmms, but
alsaplayer always works.
-- good luck, SP
--
To UNSUBSCRIBE, email to debian-sparc-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org
--
Incoming mail is certified Virus Free.
Checked by AVG Anti-Virus (http://www.grisoft.com).
Version: 7.0.279 / Virus Database: 265.2.1 - Release Date: 10/11/2004
--
Outgoing mail is certified Virus Free.
Checked by AVG Anti-Virus (http://www.grisoft.com).
Version: 7.0.279 / Virus Database: 265.2.1 - Release Date: 10/11/2004
Reply to: