Re: support for DBRI
Am Sonntag, 26. September 2004 15:22 schrieb Martin Habets:
> The SS20 has a built-in CS4215 codec as well, but it is not used if an
> external speakerbox is connected.
> So I would suggest to unplug the speakerbox, and try the modprobe again.
> Let me know how that goes.
>
> I do not have a speakerbox myself but have read they are only for SS10
> and LX models, so it is unclear to me if it could work on a SS20.
> To get more info with the speakerbox connected, please run
> # modprobe dbri dbri_debug=63
> and report the syslog output.
Note that the box does not has a speaker itself, it just has the needed
standard-plugs :)
I am not sure that the box is not broken, I never actually heard it working.
However, I had it open and it looked ok.
The SS20 is actually a Tritec WS-20L.
The debug output always begins with:
DBRI: Found SUNW,DBRIe in SBUS slot 15
DBRI: DMA Cmd Block 0xfff0e000 (0xfff0e000)
DBRI: reset 0:4008 2:9 8:0 9:0
DBRI: init: cmd: fff0e000, int: fff0e100
DBRI cmd: fff0e000:38000000
DBRI cmd: fff0e004:fff0e100
DBRI: INTR: Command: PAUSE Value:0
DBRI: INTR: Command: WAIT Value:0
DBRI: Chip completed command buffer (22)
DBRI: Interrupt! (reg1=0x00000001)
Without that box:
DBRI: no mmcodec found.
DBRI: reset 0:8 2:8 8:fff0e00c 9:fff0e100
With that box:
DBRI: Speakerbox detected
DBRI cmd: fff0e000:58001c84
DBRI cmd: fff0e004:00000000
DBRI: INTR: Command: SDP Value:7300
DBRI: INTR: Command: PAUSE Value:0
DBRI: INTR: Command: WAIT Value:0
DBRI: Chip completed command buffer (38)
DBRI: Interrupt! (reg1=0x00000001)
DBRI cmd: fff0e000:5800dc94
DBRI cmd: fff0e004:00000000
DBRI: INTR: Command: SDP Value:56468
DBRI: INTR: Command: PAUSE Value:0
DBRI: INTR: Command: WAIT Value:0
DBRI: Chip completed command buffer (18)
DBRI: Interrupt! (reg1=0x00000001)
DBRI cmd: fff0e000:58000c86
DBRI cmd: fff0e004:00000000
DBRI: INTR: Command: SDP Value:3206
DBRI: INTR: Command: PAUSE Value:0
DBRI: INTR: Command: WAIT Value:0
DBRI: Chip completed command buffer (30)
DBRI: Interrupt! (reg1=0x00000001)
DBRI cmd: fff0e000:5808cc95
DBRI cmd: fff0e004:00000000
DBRI: INTR: Command: SDP Value:52373
DBRI: INTR: Command: PAUSE Value:0
DBRI: INTR: Command: WAIT Value:0
DBRI: Chip completed command buffer (20)
DBRI: Interrupt! (reg1=0x00000001)
DBRI cmd: fff0e000:5800dc91
DBRI cmd: fff0e004:00000000
DBRI: INTR: Command: SDP Value:56465
DBRI: INTR: Command: PAUSE Value:0
DBRI: INTR: Command: WAIT Value:0
DBRI: Chip completed command buffer (27)
DBRI: Interrupt! (reg1=0x00000001)
DBRI cmd: fff0e000:5808cc92
DBRI cmd: fff0e004:00000000
DBRI: INTR: Command: SDP Value:52370
DBRI: INTR: Command: PAUSE Value:0
DBRI: INTR: Command: WAIT Value:0
DBRI: Chip completed command buffer (21)
DBRI: Interrupt! (reg1=0x00000001)
DBRI cmd: fff0e000:5808cc93
DBRI cmd: fff0e004:00000000
DBRI: INTR: Command: SDP Value:52371
DBRI: INTR: Command: PAUSE Value:0
DBRI: INTR: Command: WAIT Value:0
DBRI: Chip completed command buffer (32)
DBRI: Interrupt! (reg1=0x00000001)
DBRI cmd: fff0e000:88000014
DBRI cmd: fff0e004:3f3fd8f8
DBRI: INTR: Command: SSP Value:20
DBRI: INTR: Command: PAUSE Value:0
DBRI: INTR: Command: WAIT Value:0
DBRI: Chip completed command buffer (26)
DBRI: Interrupt! (reg1=0x00000001)
DBRI cmd: fff0e000:7802c010
DBRI cmd: fff0e004:00001c10
DBRI cmd: fff0e008:00000000
DBRI cmd: fff0e00c:78018210
DBRI cmd: fff0e010:00000000
DBRI cmd: fff0e014:00001c10
DBRI cmd: fff0e018:980c0880
DBRI cmd: fff0e01c:18000000
DBRI cmd: fff0e020:e8000007
DBRI: INTR: Command: DTS Value:49168
DBRI: INTR: Command: DTS Value:33296
DBRI: INTR: Command: CHI Value:2176
DBRI: INTR: Command: PAUSE Value:0
DBRI: INTR: Command: CDM Value:7
DBRI: INTR: Command: PAUSE Value:0
DBRI: INTR: Command: WAIT Value:0
DBRI: Chip completed command buffer (71)
DBRI: Interrupt! (reg1=0x00000001)
DBRI cmd: fff0e000:78018211
DBRI cmd: fff0e004:00000000
DBRI cmd: fff0e008:20020010
DBRI: INTR: Command: DTS Value:33297
DBRI: INTR: Command: PAUSE Value:0
DBRI: INTR: Command: WAIT Value:0
DBRI: Chip completed command buffer (31)
DBRI: Interrupt! (reg1=0x00000001)
DBRI cmd: fff0e000:7802c012
DBRI cmd: fff0e004:08020010
DBRI cmd: fff0e008:00000000
DBRI: INTR: Command: DTS Value:49170
DBRI: INTR: Command: PAUSE Value:0
DBRI: INTR: Command: WAIT Value:0
DBRI: Chip completed command buffer (33)
DBRI: Interrupt! (reg1=0x00000001)
DBRI cmd: fff0e000:7802c813
DBRI cmd: fff0e004:080e0010
DBRI cmd: fff0e008:00000000
DBRI: INTR: Command: DTS Value:51219
DBRI: INTR: Command: PAUSE Value:0
DBRI: INTR: Command: WAIT Value:0
DBRI: Chip completed command buffer (26)
DBRI: Interrupt! (reg1=0x00000001)
DBRI cmd: fff0e000:88000011
DBRI cmd: fff0e004:0068800c
DBRI: INTR: Command: SSP Value:17
DBRI: INTR: Command: PAUSE Value:0
DBRI: INTR: Command: WAIT Value:0
DBRI: Chip completed command buffer (28)
DBRI: Interrupt! (reg1=0x00000001)
DBRI: INTR: Chan:18 Code:10 Val:0x0
DBRI: CS4215 didn't respond to CLB (0x00)
DBRI: CS4215 failed probe at offset 8
DBRI: reset 0:400018 2:f6 8:fff0e00c 9:fff0e100
DBRI: INTR: Chan:19 Code:10 Val:0x0
DBRI: INTR: Chan:18 Code:10 Val:0x24
DBRI: INTR: Chan:19 Code:10 Val:0x48
DBRI: INTR: Chan:18 Code:10 Val:0xc
HS
--
Mein GPG-Key ist auf meiner Homepage verfügbar: http://www.hendrik-sattler.de
oder über pgp.net
PingoS - Linux-User helfen Schulen: http://www.pingos.org
Reply to: