[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

RE: netra X1 tftp boot..and install



Is netbooting supposed to work for the image in
http://http.us.debian.org/debian/dists/unstable/main/installer-sparc/20040315/images/sparc64/netboot/
?

I just got a kernel panic trying it. But at least the tulip driver is
there. :) Is serial console on sparc busted for the new installer?


Sun Netra X1 (UltraSPARC-IIe 500MHz), No Keyboard
OpenBoot 4.0, 1024 MB memory installed, Serial #51407241.
Ethernet address 0:3:ba:10:69:89, Host ID: 83106989.



Executing last command: boot net
Boot device: /pci@1f,0/ethernet@c  File and args:
53a800
Remapping the kernel... done.
Booting Linux...
PROMLIB: Sun IEEE Boot Prom 4.0.9 2001/05/17 21:52
Linux version 2.4.24-sparc64 (root@zachery) (gcc version 3.3.3 20040125
(prerelease) (Debian)) #1 Fri Jan 30 18:32:4
ARCH: SUN4U
Ethernet address: 00:03:ba:10:69:89
On node 0 totalpages: 130177
zone(0): 229220 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Found CPU 0 (node=f00726a0,mid=0)
Found 1 CPU prom device tree node(s).
Kernel command line:
Calibrating delay loop... 999.42 BogoMIPS
Memory: 1019880k available (2504k kernel code, 584k data, 184k init)
[fffff80000000000,000000006fec8000]
Dentry cache hash table entries: 131072 (order: 8, 2097152 bytes)
Inode cache hash table entries: 65536 (order: 7, 1048576 bytes)
Mount cache hash table entries: 512 (order: 0, 8192 bytes)
Buffer cache hash table entries: 65536 (order: 6, 524288 bytes)
Page-cache hash table entries: 131072 (order: 7, 1048576 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing for controllers.
PCI: Found SABRE, main regs at 000001fe00000000, wsync at 000001fe00001c20
SABRE: Shared PCI config space at 000001fe01000000
SABRE: DVMA at 60000000 [20000000]
PCI: Address space collision on region 6
[000001ff00080000:000001ff000bffff] of device PCI device 1282:9102
PCI-IRQ: Routing bus[ 0] slot[ 5] map[0] to INO[1c]
PCI-IRQ: Routing bus[ 0] slot[ a] map[0] to INO[24]
PCI-IRQ: Routing bus[ 0] slot[ c] map[0] to INO[06]
PCI-IRQ: Routing bus[ 0] slot[ d] map[0] to INO[0c]
PCI0(PBMA): Bus running at 33MHz
isa0: [dma] [rtc -> (todm5819)] [power] [SUNW,lomh] [serial] [serial]
[flashprom]
ebus: No EBus's found.
PCIO serial driver version 1.54
su(serial) at 0x1fe020003f8 (tty 0 irq 12,7eb) is a 16550A
su(serial) at 0x1fe020002e8 (tty 1 irq 12,7eb) is a 16550A
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.10e
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
tulip0: Old style EEPROM with no media selection information.
tulip0:  MII transceiver #1 config 1000 status 7809 advertising 01e1.
eth0: Davicom DM9102/DM9102A rev 49 at 0x1fe02010100, EEPROM not present,
00:03:BA:10:69:8A, IRQ 7739584.
tulip1: Old style EEPROM with no media selection information.
tulip1:  MII transceiver #1 config 1100 status 782d advertising 01e1.
eth1: Davicom DM9102/DM9102A rev 49 at 0x1fe02010000, EEPROM not present,
00:03:BA:10:69:89, IRQ 7738880.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
ALI15X3: IDE controller at PCI slot 00:0d.0
ALI15X3: chipset revision 195
ALI15X3: 100% native mode on irq 4,7cc
    ide0: BM-DMA at 0x1fe02010220-0x1fe02010227, BIOS settings: hda:pio,
hdb:pio
    ide1: BM-DMA at 0x1fe02010228-0x1fe0201022f, BIOS settings: hdc:pio,
hdd:pio
hda: ST340016A, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
hdc: ST340016A, ATA DISK drive
ide0 at 0x1fe02010200-0x1fe02010207,0x1fe0201021a on irq 4,7cc
ide1 at 0x1fe02010210-0x1fe02010217,0x1fe0201020a on irq 4,7cc
hda: attached ide-disk driver.
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63,
UDMA(66)
hdc: attached ide-disk driver.
hdc: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63,
UDMA(66)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
 /dev/ide/host0/bus1/target0/lun0: p1 p3
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/usb-uhci.c: $Revision: 1.275 $ time 18:40:15 Jan 30 2004
host/usb-uhci.c: High bandwidth mode enabled
host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
host/usb-ohci.c: USB OHCI at membase 0x1ff01000000, IRQ 14,7e4
host/usb-ohci.c: usb-00:0a.0, PCI device 10b9:5237
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver usbmouse
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver usbkbd
usbkbd.c: :USB HID Boot Protocol keyboard driver
mice: PS/2 mouse device common for all mice
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 131072 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 1242k freed
VFS: Mounted root (ext2 filesystem).
Warning: unable to open an initial console.
Unimplemented SPARC system call 188
Unimplemented SPARC system call 188
Kernel panic: Attempted to kill init!
 Press L1-A to return to the boot prom

-- 
Steve Haavik
Sailor Operations Center
shaavik@soc.lib.md.us
Office: 410-545-6340
Cell: 443-829-1532
Fax: 410-396-3722



Reply to: