[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Cannot see all of harddrive in Ultra 5

On Sat, 14 Jun 2003, Ben Collins wrote:

>You need to send the dmesg of the drives detection, so we can see what
>the kernel thinks.

I have inserted it below.
There is a line in the dmesg output that actually tells the right data
on the harddrive. I gather that means that the kernel *is* able to see
all of the drive.

>Also, with fdisk, did you tell it to create a new Sun disk label, and
>choose "Custom" with all the default values?

No. The first thing I tried, however, was installing Solaris 7 Server
which, of course, created a Sun Label. Solaris never saw more than about
13.5GB either.

I will try creating a Sun Disk Label with Linux fdisk and return to tell
how that went.

Best regards,
David List

----------dmesg output----------

PROMLIB: Sun IEEE Boot Prom 3.11.12 1998/05/19 11:30
Linux version 2.4.18 (root@vore) (gcc version egcs-2.92.11 19980921 (gcc2 ss-980609 experimental)) #2 Thu Apr 11 14:37:17 EDT 2002
Ethernet address: 08:00:20:9c:a2:53
On node 0 totalpages: 7678
zone(0): 8105 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Found CPU 0 (node=f006ce08,mid=0)
Found 1 CPU prom device tree node(s).
Kernel command line: root=/dev/hda4 ro
Console: colour dummy device 80x25
Calibrating delay loop... 539.03 BogoMIPS
Memory: 60360k available (1944k kernel code, 512k data, 168k init) [fffff80000000000,0000000013f52000]
Dentry-cache hash table entries: 8192 (order: 4, 131072 bytes)
Inode-cache hash table entries: 4096 (order: 3, 65536 bytes)
Mount-cache hash table entries: 1024 (order: 1, 16384 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 8192 bytes)
Page-cache hash table entries: 8192 (order: 3, 65536 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing for controllers.
PCI: Found SABRE, main regs at 000001fe00000000, wsync at 000001fe00001c20
SABRE: Shared PCI config space at 000001fe01000000
SABRE: DVMA at c0000000 [20000000]
PCI0(PBMA): Bus running at 33MHz
PCI0(PBMB): Bus running at 33MHz
ebus0: [auxio] [power] [SUNW,pll] [se] [su] [su] [ecpp] [fdthree] [eeprom] [flashprom] [SUNW,CS4231]
PCIO serial driver version 1.54
su(mouse) at 0x1fff13062f8 (irq = 4,7ea) is a 16550A
Sun Mouse-Systems mouse driver version 1.00
su(kbd) at 0x1fff13083f8 (irq = 9,7e9) is a 16550A
Sun TYPE 5 keyboard detected without keyclick
SAB82532 serial driver version 1.65
ttyS00 at 0x1fff1400000 (irq = 12,7eb) is a SAB82532 V3.2
ttyS01 at 0x1fff1400040 (irq = 12,7eb) is a SAB82532 V3.2
power: Control reg at 000001fff1724000 ... powerd running.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
atyfb: 3D RAGE (GT) [0x4754 rev 0x9a] 2M SGRAM, 14.31818 MHz XTAL, 200 MHz PLL, 67 Mhz MCLK
Console: switching to colour frame buffer device 144x56
fb0: ATY Mach64 frame buffer device on PCI
pty: 256 Unix98 ptys configured
rtc_init: no PC rtc found
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
CMD646: IDE controller on PCI bus 01 dev 18
CMD646: chipset revision 3
CMD646: chipset revision 0x03, MultiWord DMA Force Limited
CMD646: 100% native mode on irq 4,7e0
    ide0: BM-DMA at 0x1fe02c00020-0x1fe02c00027, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x1fe02c00028-0x1fe02c0002f, BIOS settings: hdc:pio, hdd:pio
hda: Maxtor 6Y080P0, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hdc: CRD-8240B, ATAPI CD/DVD-ROM drive
ide0 at 0x1fe02c00000-0x1fe02c00007,0x1fe02c0000a on irq 4,7e0
ide1 at 0x1fe02c00010-0x1fe02c00017,0x1fe02c0001a on irq 4,7e0 (shared with ide0)
hda: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=158816/16/63, (U)DMA
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
Partition check:
 hda: hda1 hda2 hda3 hda4
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
loop: loaded (max 8 devices)
sunhme.c:v1.99 12/Sep/99 David S. Miller (davem@redhat.com)
eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 08:00:20:9c:a2:53
SCSI subsystem driver Revision: 1.00
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver keyboard
usbkbd.c: :USB HID Boot Protocol keyboard driver
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 8Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Adding Swap: 266096k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,4), internal journal
sys32_ioctl(hwclock:34): Unknown cmd fd(3) cmd(00004b50) arg(effff900)
sys32_ioctl(hwclock:35): Unknown cmd fd(3) cmd(00004b50) arg(effff910)
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,3), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sys32_ioctl(hwclock:105): Unknown cmd fd(3) cmd(00004b50) arg(effff910)

Reply to: