kernel-image-2.4.5-sun4u-smp/E250
Hi All!
Hope all is going well.
Has anyone had success with the kernel-image-2.4.5-sun4u-smp package ?
I installed it yesterday on a E250, but unluckily received the
following at boot time:
Starting CPU1...OK
PSYCHO: Fatal memory allocation error
Program terminated
{0} ok
And that was it. The E250 has 2 x 400 Mhz UltraSparc II processors in
it. kernel-image-2.2.19-sun4u-smp works fine.
I tested it with kernel-image-2.4.5-sun4u (ie. non-smp version) and
that boots fine too (boot info is attached).
Is there anything I could be doing wrong ? or any more information I
can provide that might be useful ?
Cheers,
Marcus
--
.....
,,$$$$$$$$$, Marcus Crafter
;$' '$$$$: Computer Systems Engineer
$: $$$$: Open Software Associates GmbH
$ o_)$$$: 82-84 Mainzer Landstrasse
;$, _/\ &&:' 60327 Frankfurt Germany
' /( &&&
\_&&&&' Email : Marcus.Crafter@osa.de
&&&&. Business Hours : +49 69 9757 200
&&&&&&&: After Hours : +49 69 49086750
PROMLIB: Sun IEEE Boot Prom 3.16.1 1999/04/19 07:55
Linux version 2.4.5 (root@vore) (gcc version 3.0 20010426 (Debian prerelease)) #1 Sat Jun 9 12:38:36 EDT 2001
ARCH: SUN4U
Ethernet address: 08:00:20:cf:ca:97
On node 0 totalpages: 130518
zone(0): 130918 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Found CPU 0 (node=f00845d0,mid=0)
Found CPU 1 (node=f008493c,mid=1)
Found 2 CPU prom device tree node(s).
Kernel command line: root=/dev/sda1 ro
Calibrating delay loop... 799.53 BogoMIPS
Memory: 1027752k available (1832k kernel code, 464k data, 184k init) [fffff80000000000,000000003fecc000]
Dentry-cache hash table entries: 131072 (order: 8, 2097152 bytes)
Inode-cache hash table entries: 65536 (order: 7, 1048576 bytes)
Mount-cache hash table entries: 16384 (order: 5, 262144 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 524288 bytes)
Page-cache hash table entries: 131072 (order: 7, 1048576 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing for controllers.
PCI: Found PSYCHO, control regs at 000001fe00000000
PSYCHO: Shared PCI config space at 000001fe01000000
PCI0(PBMB): Bus running at 33MHz
PCI0(PBMA): Bus running at 66MHz
ebus0: [auxio] [power] [SUNW,pll] [sc] [se] [se] [su] [su] [ecpp] [eeprom] [flashprom] [SUNW,envctrltwo]
PCIO serial driver version 1.50
su(mouse) at 0x1fff13062f8 (irq = 4,7ea) is a 16550A
Sun Mouse-Systems mouse driver version 1.00
su(kbd) at 0x1fff13083f8 (irq = 9,7e9) is a 16550A
keyboard: not present
SAB82532 serial driver version 1.61
ttyS00 at 0x1fff1400000 (irq = 12,7eb) is a SAB82532 V3.2
ttyS01 at 0x1fff1400040 (irq = 12,7eb) is a SAB82532 V3.2
Console: ttyS0 (SAB82532)
power: Control reg at 000001fff1724000 ... powerd running.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
pty: 256 Unix98 ptys configured
rtc_init: no PC rtc found
block: queued sectors max/low 681040kB/549968kB, 2048 slots per queue
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
sunhme.c:v1.99 12/Sep/99 David S. Miller (davem@redhat.com)
eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 08:00:20:cf:ca:97
Linux video capture interface: v1.00
SCSI subsystem driver Revision: 1.00
sym53c8xx: at PCI bus 0, device 3, function 0
sym53c8xx: 53c875 detected
sym53c8xx: at PCI bus 0, device 3, function 1
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c875 detected
sym53c875-0: rev 0x14 on pci bus 0 device 3 function 0 irq 3,7e0
sym53c875-0: ID 7, Fast-20, Parity Checking
sym53c875-1: rev 0x14 on pci bus 0 device 3 function 1 irq 3,7e6
sym53c875-1: ID 7, Fast-20, Parity Checking
scsi0 : sym53c8xx-1.7.3a-20010304
scsi1 : sym53c8xx-1.7.3a-20010304
Vendor: SEAGATE Model: ST336704LSUN36G Rev: 032C
Type: Direct-Access ANSI SCSI revision: 03
Vendor: HP Model: C1537A Rev: L706
Type: Sequential-Access ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-M1401 Rev: 1007
Type: CD-ROM ANSI SCSI revision: 02
Vendor: SEAGATE Model: ST336704LSUN36G Rev: 032C
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi tape st0 at scsi0, channel 0, id 5, lun 0
st: bufsize 32768, wrt 30720, max init. buffers 4, s/g segs 16.
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Detected scsi disk sdb at scsi0, channel 0, id 8, lun 0
sym53c875-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 16)
SCSI device sda: 71132959 512-byte hdwr sectors (36420 MB)
Partition check:
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
sym53c875-0-<8,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 16)
SCSI device sdb: 71132959 512-byte hdwr sectors (36420 MB)
sdb: sdb1 sdb3
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0
sym53c875-0-<6,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 16)
sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.259 $ time 12:45:24 Jun 9 2001
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.251 Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber
usb-uhci.c: USB Universal Host Controller Interface driver
usb.c: registered new driver hid
hid.c: v1.16 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 131072 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 2046840k swap-space (priority -1)
eth0: Link is up using internal transceiver at 100Mb/s, Full Duplex.
Reply to: