X on an Ultra 10
*** When replying, please CC as I'm not subscribed from this
address. Thanks ***
Hi there.... I have an Ultra10 PCI with a Creator graphic adapter on
the SBUS and a PCI card as shown below:
root@etabeta:~ # lspci -v -v -s 01:02.0
01:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro 215GP (rev 5c) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 10
Interrupt: pin A routed to IRQ 006dc9a0
Region 0: Memory at 000001ffe1000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 0000000002c00400 [size=256]
Region 2: Memory at 000001ffe2000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 00000000e0020000 [disabled] [size=128K]
root@etabeta:~ # X -scanpci --verbose
Probing for PCI devices (Bus:Device:Function)
(0:0:0) unknown chip (DeviceId 0xa000) from Sun
(0:1:0) Sun Advanced PCI bridge
(0:1:1) Sun Advanced PCI bridge
(1:1:0) Sun EBUS
(1:1:1) Sun Happy Meal
(1:2:0) ATI Mach64 GP
(1:3:0) CMD card using a CMD 646
root@etabeta:~ #
What kind of graphic device should I configure for such a machine ?
The monitor is attached to the ATI card.
I've done some tests and these are the results:
Device = "fbdev"
(II) FBDev(0): using default device
(II) Running in FRAMEBUFFER Mode
(**) FBDev(0): Depth 24, (--) framebuffer bpp 32
(==) FBDev(0): RGB weight 888
(==) FBDev(0): Default visual is TrueColor
(==) FBDev(0): Using gamma correction (1.0, 1.0, 1.0)
(II) FBDev(0): Hardware: Creator (vidmem: 1280k)
(==) FBDev(0): Option ShadowFB is on
(II) FBDev(0): Checking Modes against framebuffer device...
(II) FBDev(0): mode "1280x1024" ok
(II) FBDev(0): mode "1280x960" ok
(II) FBDev(0): mode "1152x864" ok
(II) FBDev(0): mode "1024x768" ok
(II) FBDev(0): Checking Modes against monitor...
(it gets the Creator card instead of the ATI ?)
Device = "ati"
(II) ATI: ATI driver (version 6.2.3) for chipsets: ati
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 Pro PF (AGP),
ATI Rage 128 Mobility LE (PCI), ATI Rage 128 Mobility LF (AGP),
ATI Rage 128 Mobility MF (AGP), ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP)
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 6.2.3
(==) ATI(0): Chipset: "ati".
(**) ATI(0): Depth 24, (--) framebuffer bpp 32
(EE) ATI(0): Adapter has not been initialised.
(II) Unloading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(EE) Screen(s) found, but none have a usable configuration.
Device = vesa
(WW) Warning, couldn't open module vesa
(EE) Failed to load module "vesa" (module does not exist, 0)
Another strange thing is that /proc/fb is empty.
# uname -a
Linux etabeta 2.4.3-pre8 #1 Thu Mar 29 11:44:21 CEST 2001 sparc64 unknown
here's the config I used:
CONFIG_EXPERIMENTAL=y
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SPARC64=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_SBUS=y
CONFIG_SBUSCHAR=y
CONFIG_BUSMOUSE=y
CONFIG_SUN_MOUSE=y
CONFIG_SERIAL=y
CONFIG_SUN_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
CONFIG_SUN_KEYBOARD=y
CONFIG_SUN_CONSOLE=y
CONFIG_SUN_AUXIO=y
CONFIG_SUN_IO=y
CONFIG_PCI=y
CONFIG_RTC=y
CONFIG_PCI_NAMES=y
CONFIG_SUN_OPENPROMFS=y
CONFIG_NET=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
CONFIG_SPARC32_COMPAT=y
CONFIG_BINFMT_ELF32=y
CONFIG_BINFMT_AOUT32=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_SUNOS_EMUL=y
CONFIG_SOLARIS_EMUL=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_SUNBPP=m
CONFIG_PARPORT_1284=y
CONFIG_PRINTER=m
CONFIG_ENVCTRL=m
CONFIG_PROM_CONSOLE=y
CONFIG_FB=y
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FB_ATY=y
CONFIG_FB_SBUS=y
CONFIG_FB_CREATOR=y
CONFIG_FB_PCI=y
CONFIG_FB_ATY=y
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
CONFIG_FBCON_CFB24=y
CONFIG_FBCON_CFB32=y
CONFIG_FBCON_FONTWIDTH8_ONLY=y
CONFIG_FONT_SUN8x16=y
CONFIG_SUN_OPENPROMIO=y
CONFIG_SUN_MOSTEK_RTC=y
CONFIG_SAB82532=y
CONFIG_OBP_FLASH=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK=y
CONFIG_RTNETLINK=y
CONFIG_NETLINK_DEV=y
CONFIG_NETFILTER=y
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_INET_ECN=y
CONFIG_SYN_COOKIES=y
CONFIG_IP_NF_CONNTRACK=y
CONFIG_IP_NF_FTP=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=y
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=y
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_NAT_FTP=y
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_TCPMSS=y
CONFIG_IPV6=y
CONFIG_IPV6_EUI64=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_LIMIT=y
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_NET_SCHED=y
CONFIG_NETLINK=y
CONFIG_RTNETLINK=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_CSZ=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_POLICE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_CMD64X=y
CONFIG_BLK_DEV_NS87415=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_IDE_MODES=y
CONFIG_NETDEVICES=y
CONFIG_TUN=m
CONFIG_SUNLANCE=y
CONFIG_HAPPYMEAL=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=512
CONFIG_DRM=y
CONFIG_DRM_FFB=y
CONFIG_INPUT=y
CONFIG_INPUT_KEYBDEV=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_EVDEV=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
CONFIG_EFS_FS=m
CONFIG_CRAMFS=m
CONFIG_RAMFS=m
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_MINIX_FS=m
CONFIG_PROC_FS=y
CONFIG_DEVPTS_FS=y
CONFIG_ROMFS_FS=m
CONFIG_EXT2_FS=y
CONFIG_SYSV_FS=m
CONFIG_SYSV_FS_WRITE=y
CONFIG_UDF_FS=m
CONFIG_UDF_RW=y
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
CONFIG_CODA_FS=m
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_SMB_FS=m
CONFIG_PARTITION_ADVANCED=y
CONFIG_MSDOS_PARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_15=m
CONFIG_MAGIC_SYSRQ=y
--
-------------------------------------------------------------------------------
Pierfrancesco Caci | System Administrator @ seabone.net
p.caci@seabone.net | Telecom Italia S.p.A. - International Operations
Linux paperino 2.4.2 #2 Thu Mar 8 15:21:54 CET 2001 i686 unknown
Reply to: