XFree86 Problems
I'm having some problems with XFree86.. At the suggestion of a friend, I
symlinked /dev/fb to /dev/fb0, but I still can't start X.. Here's what I get
when I try to startx:
(BTW, gpm isn't working either, see dmesg output at bottom. What should I be
using as my mouse device?)
XFree86 Version 3.3.3.1 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 4 1999
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.9 sparc64 [ELF]
Configured drivers:
Mach64: accelerated server for ATI Mach64 graphics adaptors (Patchlevel 0)
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: rules: "xfree86"
(**) XKB: model: "sun"
(**) XKB: compat: "compat/complete"
(**) XKB: types: "types/complete"
(**) XKB: keycodes: "sun(type5)"
(**) XKB: geometry: "sun(type5unix)"
(**) XKB: symbols: "sun/us(sun5)"
(**) Mouse: type: sun, device: /dev/mouse, baudrate: 1200
(**) Mouse: buttons: 3
(**) Mach64: Graphics device ID: "My Video Card"
(**) Mach64: Monitor ID: "Sony Multiscan 17seII"
(--) Mach64: Mode "1280x1024x76" needs hsync freq of 81.13 kHz. Deleted.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) Mach64: PCI: Mach64 RagePro rev 92, Aperture @ 0xe1000000, Registers @ 0xe2000000, Block I/O @ 0xc00100
(--) Mach64: PCI (92) and CONFIG_CHIP_ID (124) don't agree on ChipRev,
using PCI value
(--) Mach64: Card type: PCI
(--) Mach64: Memory type: SGRAM (5)
(--) Mach64: Clock type: Internal
(--) Mach64: Maximum allowed dot-clock: 230.000 MHz
(**) Mach64: Mode "1152x900x76": mode clock = 108.000
(**) Mach64: Virtual resolution: 1152x900
(--) Mach64: Video RAM: 4096k
(--) Mach64: Using hardware cursor
(--) Mach64: Using 16 MB aperture @ 0xe1000000
(--) Mach64: Using 4 KB register aperture @ 0xe2000000
(--) Mach64: Ramdac is Internal
(--) Mach64: Ramdac speed: 230 MHz
(**) Mach64: Color weight: 565
Fatal server error:
xf86MapVidMem: Could not mmap framebuffer (Invalid argument)
X connection to :0.0 broken (explicit kill or server shutdown).
Here's my dmesg output:
PROMLIB: Sun IEEE Boot Prom 3.19.3 1999/04/07 17:48
Linux version 2.2.1 (root@fatneck) (gcc version egcs-2.92.11 19980921 (gcc2 ss-980609 experimental)) #2 Fri Feb 26 17:17:20 EST 1999
ARCH: SUN4U
Ethernet address: 08:00:20:a8:33:4d
Console: colour dummy device 80x25
Calibrating delay loop... 719.26 BogoMIPS
Memory: 126024k available (1744k kernel code, 2392k data, 152k init) [fffff80000000000,fffff80017f4c000]
VFS: Diskquotas version dquot_6.4.0 initialized
POSIX conformance testing by UNIFIX
PCI: Probing for controllers.
PCI: Found SABRE, main regs at fffff9fe00000000 CTRL[0000000000000000]
SABRE: PCI config space at fffff9fe01000000
SABRE: DVMA at c0000000 [20000000]
PCI: Probing PCI hardware
ebus0: fffff9fff0000000[1000000] fffff9fff1000000[800000]
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
Initializing RT netlink socket
Starting kswapd v 1.5
atyfb: 3D RAGE PRO (PQFP, PCI) [0x4750 rev 0x7c] 4M SGRAM, 230 MHz PLL, 100 Mhz MCLK
Console: switching to colour frame buffer device 144x56
fb0: ATY Mach64 frame buffer device on PCI
PCIO serial driver version 1.18
su(kbd) at fffff9fff13083f8 (irq = 9,7e9) is a 16550A
Sun TYPE 5 keyboard detected without keyclick
su(mouse) at fffff9fff13062f8 (irq = 4,7ea) is a 16550A
SAB82532 serial driver version 1.28
ttyS00 at 0xfffff9fff1400000 (irq = 12,7eb) is a SAB82532 V3.2
ttyS01 at 0xfffff9fff1400040 (irq = 12,7eb) is a SAB82532 V3.2
Sun Mouse-Systems mouse driver version 1.00
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
CMD646: IDE controller on PCI bus 01 dev 18
CMD646: 100% native mode on irq 3,7e0
ide0: BM-DMA at 0xfffff9fe02c00020-0xfffff9fe02c00027, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xfffff9fe02c00028-0xfffff9fe02c0002f, BIOS settings: hdc:pio, hdd:pio
hda: ST38420A, ATA DISK drive
hdc: CRD-8322B, ATAPI CDROM drive
ide0 at 0x2c00000-0x2c00007,0x2c0000a on irq 3,7e0
ide1 at 0x2c00010-0x2c00017,0x2c0001a on irq 3,7e0 (shared with ide0)
CMD646: MDMA enable [SELECT SETXFER CMND wait STAT(50) SETFEATURE wait STAT(d0) STAT(50) DMA_CAP DONE]
hda: ST38420A, 8223MB w/512kB Cache, CHS=16708/16/63, (U)DMA
hdc: ATAPI 1X CD-ROM drive, 5632kB Cache
Uniform CDROM driver Revision: 2.52
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
scsi : 0 hosts.
scsi : detected total.
sunhme.c:v1.10 27/Jan/99 David S. Miller (davem@caipfs.rutgers.edu)
eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 08:00:20:a8:33:4d
Partition check:
hda: hda1 hda2 hda3 hda4 hda5 hda7 hda8
VFS: Mounted root (ext2 filesystem) readonly.
sys32_ioctl: Unknown cmd fd(3) cmd(ffffffff) arg(00000000)
sys32_ioctl: Unknown cmd fd(3) cmd(ffffffff) arg(00000000)
sys32_ioctl: Unknown cmd fd(3) cmd(0000541e) arg(effffc10)
eth0: Link is up using internal transceiver at 10Mb/s, Half Duplex.
sys32_ioctl: Unknown cmd fd(6) cmd(0000541e) arg(effffbe0)
sys32_ioctl: Unknown cmd fd(6) cmd(0000541e) arg(effffbe0)
sunmouse: Successfully adjusted to 1200 baud.
sys32_ioctl: Unknown cmd fd(3) cmd(40047486) arg(efffd404)
sys32_ioctl: Unknown cmd fd(3) cmd(40047486) arg(efffc31c)
sys32_ioctl: Unknown cmd fd(3) cmd(80047487) arg(efffe90c)
sys32_ioctl: Unknown cmd fd(3) cmd(40047486) arg(efffe4b4)
sys32_ioctl: Unknown cmd fd(3) cmd(40047486) arg(efffd404)
sys32_ioctl: Unknown cmd fd(3) cmd(40047486) arg(efffc31c)
sys32_ioctl: Unknown cmd fd(3) cmd(80047487) arg(efffe90c)
sys32_ioctl: Unknown cmd fd(3) cmd(40047486) arg(efffe4b4)
sys32_ioctl: Unknown cmd fd(3) cmd(40047486) arg(efffd404)
sys32_ioctl: Unknown cmd fd(3) cmd(40047486) arg(efffc31c)
sys32_ioctl: Unknown cmd fd(3) cmd(80047487) arg(efffe90c)
sys32_ioctl: Unknown cmd fd(3) cmd(40047486) arg(efffe4b4)
sys32_ioctl: Unknown cmd fd(3) cmd(40047486) arg(efffd404)
sys32_ioctl: Unknown cmd fd(3) cmd(40047486) arg(efffc31c)
sys32_ioctl: Unknown cmd fd(3) cmd(80047487) arg(efffe90c)
----- End forwarded message -----
Reply to: