Re: непонятка с сетью

[Andrei Lomov <lomov@math.nsc.ru>]

Tim Sattarov wrote:

> Привет,
> 
> сорри за топ квотинг.
> 
> 
> для отладки состояния сети попробуй проанализировать вывод команд:
> 
> mii-tool eth0

eth0: negotiated 100baseTx-FD flow-control, link ok


> ip link show eth0
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state 
UP mode DEFAULT group default qlen 1000
    link/ether fc:aa:14:96:a0:d2 brd ff:ff:ff:ff:ff:ff

 
> ip ro

пустой вывод


> dmesg

[    1.417475] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.417487] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM 
control

[    1.423889] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 
0xffffc90000c5e000, fc:aa:14:96:a0:d2, XID 0c000800 IRQ 29
[    1.423893] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, 
tx checksumming: ko]


[    4.798686] r8169 0000:03:00.0 eth0: link down
[    4.798706] r8169 0000:03:00.0 eth0: link down
[    4.798724] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.459816] init: plymouth-upstart-bridge main process ended, respawning
[    5.464461] init: plymouth-upstart-bridge main process (1185) terminated 
with status 1
[    5.464483] init: plymouth-upstart-bridge main process ended, respawning
[    6.491855] r8169 0000:03:00.0 eth0: link up
[    6.491872] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready


[   66.886335] NETDEV WATCHDOG: eth0 (r8169): transmit queue 0 timed out

[   66.886338] Modules linked in: ... r8169 ahci pata_atiixp libahci mii

[   66.900726] r8169 0000:03:00.0 eth0: link up
[  126.925979] r8169 0000:03:00.0 eth0: link up


Все вроде гладко? ...

> ping 192.168.1.13
connect: Network is unreachable
 
> ip neigh
пустой вывод

Дело идет к тому, чтобы поставить нормальный debian ...


--
А.