Re: Ошибка записи и софтлинк на dvd
Так блин... лежать-бояться... Водим глючное поделие имени
дебиана очень криво жгёт. Надо пользоваться
мейнстримом, то есть сидирекорд от шилли.
http://cdrecord.berlios.de/private/cdrecord.html
26 января 2009 г. 18:29 пользователь Mishustin Alexey
<shumkar@shumkar.ru> написал:
> В Пнд, 26/01/2009 в 17:34 +0300, Dmitry E. Oboukhov пишет:
>> MA> И что ж за глюк-то с записью, а? Некошерно как-то образ дебиана под
>> MA> виндой жечь...
>> а попробуй писать woodim'ом а не dd
>
> Это была моя _последняя_ )) болванка:
>
> $ wodim -dev=/dev/dvd -speed=0 -dao ./debian-testing-i386-DVD-1.iso
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 2
> Capabilities :
> Vendor_info : '_NEC '
> Identification : 'DVD_RW ND-3500AG'
> Revision : '2.16'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW.
> Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
> Driver flags : SWABAUDIO BURNFREE
> Supported modes: PACKET SAO
> Speed set to 8467 KB/s
> Starting to write CD/DVD at speed 6.0 in real SAO mode for single
> session.
> Last chance to quit, starting real write 0 seconds. Operation starts.
> Errno: 5 (Input/output error), write_g1 scsi sendcmd: cmd timeout after
> 0.000 (200) s
> CDB: 2A 00 00 0A 0F 8B 00 00 1F 00
> Sense Bytes:
> Sense Key: 0xFFFFFFFF [], Segment 0
> Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
> Sense flags: Blk 0 (not valid)
> resid: 63488
> cmd finished after 0.000s timeout 200s
> write track data: error after 1350326272 bytes
> wodim: A write error occured.
> wodim: Please properly read the error message above.
> Errno: 0 (Success), test unit ready scsi sendcmd: no error
> CDB: 00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80
> Sense Key: 0x2 Not Ready, Segment 0
> Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming
> ready) Fru 0x0
> Sense flags: Blk 0 (not valid) operation 0% done
> cmd finished after 0.000s timeout 200s
> Errno: 0 (Success), close track/session scsi sendcmd: no error
> CDB: 5B 00 02 00 00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80
> Sense Key: 0x2 Not Ready, Segment 0
> Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming
> ready) Fru 0x0
> Sense flags: Blk 0 (not valid) operation 0% done
> cmd finished after 0.000s timeout 1000s
> Errno: 0 (Success), flush cache scsi sendcmd: no error
> CDB: 35 00 00 00 00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80
> Sense Key: 0x2 Not Ready, Segment 0
> Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming
> ready) Fru 0x0
> Sense flags: Blk 0 (not valid) operation 0% done
> cmd finished after 0.000s timeout 1000s
> Trouble flushing the cache
>
> --
> С уважением,
> Алексей Мишустин
>
>
> --
> To UNSUBSCRIBE, email to debian-russian-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
>
--
Boris Popov
Reply to: