Re: Ошибка записи и софтлинк на dvd
В Пнд, 26/01/2009 в 17:34 +0300, Dmitry E. Oboukhov пишет:
> MA> И что ж за глюк-то с записью, а? Некошерно как-то образ дебиана под
> MA> виндой жечь...
> а попробуй писать woodim'ом а не dd
Это была моя _последняя_ )) болванка:
$ wodim -dev=/dev/dvd -speed=0 -dao ./debian-testing-i386-DVD-1.iso
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identification : 'DVD_RW ND-3500AG'
Revision : '2.16'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Speed set to 8467 KB/s
Starting to write CD/DVD at speed 6.0 in real SAO mode for single
session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: cmd timeout after
0.000 (200) s
CDB: 2A 00 00 0A 0F 8B 00 00 1F 00
Sense Bytes:
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.000s timeout 200s
write track data: error after 1350326272 bytes
wodim: A write error occured.
wodim: Please properly read the error message above.
Errno: 0 (Success), test unit ready scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming
ready) Fru 0x0
Sense flags: Blk 0 (not valid) operation 0% done
cmd finished after 0.000s timeout 200s
Errno: 0 (Success), close track/session scsi sendcmd: no error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming
ready) Fru 0x0
Sense flags: Blk 0 (not valid) operation 0% done
cmd finished after 0.000s timeout 1000s
Errno: 0 (Success), flush cache scsi sendcmd: no error
CDB: 35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming
ready) Fru 0x0
Sense flags: Blk 0 (not valid) operation 0% done
cmd finished after 0.000s timeout 1000s
Trouble flushing the cache
--
С уважением,
Алексей Мишустин
Reply to: