Re: SATA и IDE-CD
Приведу выдержки из syslog для 2-х вариантов загрузки:
ide-generic загружается раньше модуля для чипсета
--skip--
Oct 25 16:09:37 piiix2 kernel: ide: Assuming 33MHz system bus speed for
PIO modes; override with idebus=xx
Oct 25 16:09:37 piiix2 kernel: Probing IDE interface ide0...
Oct 25 16:09:37 piiix2 kernel: hda: ST3120022A, ATA DISK drive
Oct 25 16:09:37 piiix2 kernel: Probing IDE interface ide1...
Oct 25 16:09:37 piiix2 kernel: Probing IDE interface ide2...
Oct 25 16:09:37 piiix2 kernel: Probing IDE interface ide3...
Oct 25 16:09:37 piiix2 kernel: Probing IDE interface ide4...
Oct 25 16:09:37 piiix2 kernel: Probing IDE interface ide5...
Oct 25 16:09:37 piiix2 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 25 16:09:37 piiix2 kernel: hda: max request size: 1024KiB
Oct 25 16:09:37 piiix2 kernel: hda: 234441648 sectors (120034 MB)
w/2048KiB Cache, CHS=16383/255/63
Oct 25 16:09:37 piiix2 kernel: hda: cache flushes supported
--skip--
Oct 25 16:09:37 piiix2 kernel: SvrWks OSB4: IDE controller at PCI slot
0000:00:0f.1
Oct 25 16:09:37 piiix2 kernel: SvrWks OSB4: chipset revision 0
Oct 25 16:09:37 piiix2 kernel: SvrWks OSB4: not 100%% native mode: will
probe irqs later
Oct 25 16:09:37 piiix2 kernel: SvrWks OSB4: port 0x01f0 already claimed
by ide0
Oct 25 16:09:37 piiix2 kernel: ide1: BM-DMA at 0xffa8-0xffaf, BIOS
settings: hdc:pio, hdd:pio
Oct 25 16:09:37 piiix2 kernel: Probing IDE interface ide1...
--skip--
ide-generic загружается после модуля для чипсета
--skip--
Oct 31 14:32:57 piiix2 kernel: Uniform Multi-Platform E-IDE driver
Revision: 7.00alpha2
Oct 31 14:32:57 piiix2 kernel: ide: Assuming 33MHz system bus speed for
PIO modes; override with idebus=xx
--skip--
Oct 31 15:12:01 piiix2 kernel: SvrWks OSB4: IDE controller at PCI slot
0000:00:0f.1
Oct 31 15:12:01 piiix2 kernel: SvrWks OSB4: chipset revision 0
Oct 31 15:12:01 piiix2 kernel: SvrWks OSB4: not 100%% native mode: will
probe irqs later
Oct 31 15:12:01 piiix2 kernel: ide0: BM-DMA at 0xffa0-0xffa7, BIOS
settings: hda:DMA, hdb:pio
Oct 31 15:12:01 piiix2 kernel: ide1: BM-DMA at 0xffa8-0xffaf, BIOS
settings: hdc:pio, hdd:pio
Oct 31 15:12:01 piiix2 kernel: Probing IDE interface ide0...
Oct 31 15:12:01 piiix2 kernel: hda: ST3120022A, ATA DISK drive
Oct 31 15:12:02 piiix2 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 31 15:12:02 piiix2 kernel: hda: max request size: 1024KiB
Oct 31 15:12:02 piiix2 kernel: hda: 234441648 sectors (120034 MB)
w/2048KiB Cache, CHS=16383/255/63, (U)DMA
Oct 31 15:12:02 piiix2 kernel: hda: cache flushes supported
--skip--
> srr@mars:~$ cat /etc/mkinitrd/modules
> raid1
> md
> piix
> ide-generic
Посмотри внимательно в самом файле, который mkinitrd генерирует на
порядок загрузки модулей.
А если root на SATA винтах, то лучше загрузку ide вынести из initrd
совсем и прописать в /etc/modules
> piix
> ide-generic
Reply to: