[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: читалка для мыла...



В сообщении от 10 Октябрь 2003 16:39 Maxim Tyurin написал:
> On Fri, Oct 10, 2003 at 03:54:16PM +0600, Dimitry N. Naldaev wrote:
> > В сообщении от 9 Октябрь 2003 14:59 Dmitry Astapov написал:
> > > Evening, Dimitry.
> > >
> > > "Dimitry N. Naldaev" <dima@tic.perm.ru> 12:21 9/10/2003 wrote:
> > >
> > >  DNN> кстати, а где-нибудь есть нормальное howto на русском как
> > > правильно DNN> настроить GNUS для работы с почтой (ну не могу я понять
> > > этого из DNN> англоязычного RTFM :-( )
> > >
> > > Ээээ. А как ты потом с ним работать будешь, без понимания на
> > > английском?
> >
> > а так же, как и со всем остальным :-)
> > на английском тоже в принципе могу читать, но на русском быстрее и
> > приятнее
> >
> > :-)
> > :
> > > Ходи на http://my.gnus.org. Там генерируй себе в "dot-file generator"
> > > простенький конфиг. Там же читай Tutorial. Он хоть и английский, но
> > > более детальный, чем тот, что идет в .info
> >
> > это очень похоже на то что надо...
> >
> > вытащил исходники в texi сгенерил версию для печати (ну нравится мне
> > читать с с бумаги а не с экрана) а там нет оглавления :-( точнее оно там
> > есть, но всего из одной строчки:
> > Gnus User's Guide . . . . . . . . . . . . . 1
> > но занимает два листа
>
> А ты попробуй полностью прогнать (полные 5 проходов):
> tex your.texi && texindex your.?? && tex your.texi && texindex your.??
> && tex your.texi

не помогло :-(  toc всеравно не генерится :-( но после этого появились 
промежуточные файлы, в том числе и лог, который приаттачен...

Кстати, если мне захочется поменять размер шрифта, размер бумаги или размер 
полей, как это можно будет сделать ???

>
> Соответственно замени your на нужно имя файла
This is TeX, Version 3.14159 (Web2C 7.3.7) (format=tex 2003.1.13)  10 OCT 2003 19:51
**gnus-tutorial.texi
(./gnus-tutorial.texi (/usr/share/texmf/tex/texinfo/texinfo.tex
Loading texinfo [version 2003-05-04.08]: Basics,
\bindingoffset=\dimen16
\normaloffset=\dimen17
\pagewidth=\dimen18
\pageheight=\dimen19
\outerhsize=\dimen20
\outervsize=\dimen21
\cornerlong=\dimen22
\cornerthick=\dimen23
\topandbottommargin=\dimen24
\headlinebox=\box16
\footlinebox=\box17
\margin=\insert252
\EMsimple=\toks12
\groupbox=\box18
\groupinvalidhelp=\toks13
\mil=\dimen25
\exdentamount=\skip18
\inmarginspacing=\skip19
\currentparindent=\dimen26
 pdf,
\tempnum=\count26
\lnkcount=\count27
\filename=\toks14
\filenamelength=\count28
\pgn=\count29
\toksA=\toks15
\toksB=\toks16
\toksC=\toks17
\toksD=\toks18
\boxA=\box19
\countA=\count30
 fonts,
\sffam=\fam8
\textleading=\dimen27
\mainmagstep=\count31
\fontdepth=\count32
 page headings,
\titlepagetopglue=\skip20
\titlepagebottomglue=\skip21
\evenheadline=\toks19
\oddheadline=\toks20
\evenfootline=\toks21
\oddfootline=\toks22

tables,
\tableindent=\dimen28
\itemindent=\dimen29
\itemmargin=\dimen30
\itemmax=\dimen31
\itemno=\count33
\multitableparskip=\skip22
\multitableparindent=\skip23
\multitablecolspace=\dimen32
\multitablelinespace=\skip24
\colcount=\count34
\savedfootnotes=\box20
 conditionals, indexing,
\secondaryindent=\skip25
\partialpage=\box21
\doublecolumnhsize=\dimen33
 sectioning,
\chapno=\count35
\secno=\count36
\subsecno=\count37
\subsubsecno=\count38
\appendixno=\count39
\absseclevel=\count40
\secbase=\count41
\chapheadingskip=\skip26
\secheadingskip=\skip27
\subsecheadingskip=\skip28
 toc,
\tocfile=\write0
\contentsrightmargin=\skip29
\savepageno=\count42
\lastnegativepageno=\count43
\shortappendixwidth=\dimen34
\tocindent=\dimen35
 environments,
\errorbox=\box22
\lispnarrowing=\skip30
\envskipamount=\skip31
\circthick=\dimen36
\cartouter=\dimen37
\cartinner=\dimen38
\normbskip=\skip32
\normpskip=\skip33
\normlskip=\skip34
\lskip=\skip35
\rskip=\skip36
\tabw=\dimen39
 defuns,
\defbodyindent=\skip37
\defargsindent=\skip38
\deflastargmargin=\skip39
\parencount=\count44
 macros,
\macscribble=\write1
\paramno=\count45
\macname=\toks23

cross references,
\auxfile=\write2
\savesfregister=\count46
\footnoteno=\count47
 (/usr/share/texmf/tex/plain/dvips/epsf.tex
\epsffilein=\read0
\epsfframemargin=\dimen40
\epsfframethickness=\dimen41
\epsfrsize=\dimen42
\epsftmp=\dimen43
\epsftsize=\dimen44
\epsfxsize=\dimen45
\epsfysize=\dimen46
\pspoints=\dimen47
\epsfnoopenhelp=\toks24
)
\noepsfhelp=\toks25
 localization,
\nolanghelp=\toks26
\defaultparindent=\dimen48

and turning on texinfo input format.) (./gnus-tutorial.aux)
@cpindfile=@write3
@fnindfile=@write4
@vrindfile=@write5
@tpindfile=@write6
@kyindfile=@write7
@pgindfile=@write8
 [1
\openout2 = `gnus-tutorial.aux'.

\openout3 = `gnus-tutorial.cp'.

\openout4 = `gnus-tutorial.fn'.

\openout5 = `gnus-tutorial.vr'.

\openout6 = `gnus-tutorial.tp'.

\openout7 = `gnus-tutorial.ky'.

\openout8 = `gnus-tutorial.pg'.

] [2]
(Gnus User's Guide)
\openout0 = `gnus-tutorial.toc'.

 [1] [2] (./gnus-tutorial.toc) [-1] [-2]
(./introduction.texi Chapter 1) (./getting-started-unix.texi Chapter 2 [3
\chapentry{Introduction}{1}{3}
\secentry{Conventions}{1}{1}{3}
\secentry{Acknowledgements}{1}{2}{3}
] [4]
Overfull \hbox (42.70708pt too wide) in paragraph at lines 12--15
[]@textrm At this point, we pre-sume that ei-ther Emacs @texttt http://www.gnu.
org/software/emacs/emacs.html[]|

@hbox(7.60416+2.43333)x433.62, glue set - 1.0
.@hbox(0.0+0.0)x15.0
.@textrm A
.@kern-0.30418
.@textrm t
.@glue 3.65 plus 1.825 minus 1.21666
.etc.

[5
\chapentry{Getting Started on Unix}{2}{5}
\secentry{Getting the most recent Gnus version}{2}{1}{5}
] [6
\secentry{Installing Gnus}{2}{2}{6}
]) (./getting-started-windows.texi Chapter 3 [7] [8] [9
\chapentry{Getting Started on MS Windows}{3}{9}
\secentry{Getting a copy of either Emacs or XEmacs}{3}{1}{9}
\subsecentry{Do we want XEmacs or GNU Emacs?}{3}{1}{1}{9}
\subsecentry{Getting and Installing XEmacs}{3}{1}{2}{9}
] [10
\subsecentry{Getting and Installing GNU Emacs}{3}{1}{3}{10}
\secentry{Getting the most recent Gnus version}{3}{2}{10}
]
Underfull \hbox (badness 10000) in paragraph at lines 196--201
@textrm re-sides in, e.g. `@texttt G:\Programme\XEmacs\XEmacs-21.4.11\i586-pc-w
in32\[]@textrm '[] or

@hbox(7.60416+2.43333)x433.62, glue set 5.25095
.@textrm r
.@textrm e
.@discretionary
..@textrm -
.@textrm s
.@textrm i
.etc.

[11
\secentry{Installing Gnus}{3}{3}{11}
]) (./fundamental.texi Chapter 4 [12]) (./using-gnus.texi Chapter 5 [13
\chapentry{Fundamental Configuration}{4}{13}
] [14] [15
\chapentry{Using Gnus}{5}{15}
\secentry{The group buffer}{5}{1}{15}
\subsecentry{Subscribing to groups}{5}{1}{1}{15}
\subsecentry{The Topic-Mode}{5}{1}{2}{15}
\subsecentry{More commands in the group buffer}{5}{1}{3}{15}
]
Underfull \hbox (badness 10000) in paragraph at lines 106--106
 @textrm Wordwrap the cur-rent

@hbox(7.60416+2.12917)x143.09538, glue set 6.6332
.@glue(@leftskip) 12.0
.@textrm W
.@kern-0.91252
.@textrm o
.@textrm r
.etc.


Underfull \hbox (badness 10000) in paragraph at lines 109--110
 @textrm create a scorefile-entry

@hbox(7.60416+2.12917)x143.09538, glue set 6.37486
.@glue(@leftskip) 12.0
.@textrm c
.@textrm r
.@textrm e
.@textrm a
.etc.

[16
\secentry{Summary and Article buffer}{5}{2}{16}
] [17
\secentry{Writing new mail and news}{5}{3}{17}
\secentry{Help!}{5}{4}{17}
]) (./basics.texi Chapter 6 [18
\subsecentry{RTFM}{5}{4}{1}{17}
\subsecentry{The menu-bar}{5}{4}{2}{18}
\subsecentry{The help}{5}{4}{3}{18}
\subsecentry{Ask people}{5}{4}{4}{18}
\secentry{Miscellaneous}{5}{5}{18}
] [19
\chapentry{Basic terminology and news reading}{6}{19}
]
Underfull \hbox (badness 2452) in paragraph at lines 118--126
 @textrm One of my fa-vorites is `@texttt gnu.emacs.gnus[]@textrm '[], and I wi
sh I would read

@hbox(7.60416+2.43333)x433.62, glue set 2.90604
.@glue(@leftskip) 57.81621
.@textrm O
.@textrm n
.@textrm e
.@glue 3.65 plus 1.825 minus 1.21666
.etc.

[20]) (./mail.texi Chapter 7 [21] [22] [23
\chapentry{Mail}{7}{23}
\secentry{Choosing a mail backend}{7}{1}{23}
] [24
\subsecentry{Backends with one file per server}{7}{1}{1}{24}
] [25
\subsecentry{Backends with one file per group}{7}{1}{2}{24}
\subsecentry{Backends with one file per message}{7}{1}{3}{25}
\subsecentry{Other mail backends}{7}{1}{4}{25}
] [26
\subsecentry{Summary}{7}{1}{5}{25}
\subsecentry{Hands-on Advice}{7}{1}{6}{26}
] [27
\secentry{Fetching and sending mail}{7}{2}{27}
] [28
\secentry{Auto-expire versus total-expire}{7}{3}{28}
\subsecentry{What is expiry?}{7}{3}{1}{28}
] [29
\subsecentry{Why auto-expire and total-expire?}{7}{3}{2}{29}
\subsecentry{Auto-expire vs.\ total-expire}{7}{3}{3}{29}
] [30
\subsubsecentry{Article marks with and without total-expire}{7}{3}{3}{1}{30}
] [31
\subsubsecentry{Speed issues}{7}{3}{3}{2}{30}
\subsubsecentry{Functionality}{7}{3}{3}{3}{31}
\subsubsecentry{A summary}{7}{3}{3}{4}{31}
] [32
\secentry{Migrating old mail}{7}{4}{32}
\secentry{Making Gnus behave like other mail readers}{7}{5}{32}
\subsecentry{Don't hide messages that have been read}{7}{5}{1}{32}
]) (./reading.texi Chapter 8 [33
\secentry{Archiving Mail}{7}{6}{33}
] [34]
Underfull \hbox (badness 10000) in paragraph at lines 54--55
 @textrm previous group with un-read

@hbox(7.60416+2.12917)x173.44534, glue set 5.29327
.@glue(@leftskip) 12.0
.@textrm p
.@textrm r
.@textrm e
.@textrm v
.etc.

[35
\chapentry{Reading articles}{8}{35}
\secentry{Moving Around}{8}{1}{35}
]) (./index.texi Chapter 9 [36
\secentry{Selecting Stuff}{8}{2}{36}
\secentry{Read vs Unread Articles}{8}{3}{36}
\secentry{Marking Articles}{8}{4}{36}
] (./gnus-tutorial.cps)) [37
\chapentry{Index}{9}{37}
] [38] ) 
Here is how much of TeX's memory you used:
 1433 strings out of 13003
 16441 string characters out of 96988
 39726 words of memory out of 263001
 2282 multiletter control sequences out of 10000+0
 31953 words of font info for 111 fonts, out of 400000 for 1000
 20 hyphenation exceptions out of 1000
 15i,9n,11p,279b,386s stack positions out of 300i,100n,500p,50000b,4000s

Output written on gnus-tutorial.dvi (42 pages, 100700 bytes).

Reply to: