[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: eth0: card reports no RX buffers.



на сайте производителей сетевух довольно часто валяются дрова под люликс,
мож они помогут..


On Fri, 28 Sep 2001 12:48:51 +0200
"Oleg A Chernov" <oleg.chernov@nap.nikolaev.ua> wrote:

OAC> Здравствуйте, имеем

OAC> Linux version 2.2.17 (root@fw_wp) (gcc version 2.95.2 20000220
OAC> (Debian
OAC> GNU/Linux)) #2 Thu Sep 13 18:49:06 EEST 2001
OAC> Detected 551261 kHz processor.
OAC> Console: colour VGA+ 80x25
OAC> Calibrating delay loop... 1097.73 BogoMIPS
OAC> Memory: 63312k/65472k available (836k kernel code, 416k reserved,
OAC> 868k data,
OAC> 40k init)
OAC> Dentry hash table entries: 8192 (order 4, 64k)
OAC> Buffer cache hash table entries: 65536 (order 6, 256k)
OAC> Page cache hash table entries: 16384 (order 4, 64k)
OAC> CPU serial number disabled.
OAC> CPU: Intel Pentium III (Coppermine) stepping 03
OAC> Checking 386/387 coupling... OK, FPU using exception 16 error
OAC> reporting.
OAC> Checking 'hlt' instruction... OK.
OAC> POSIX conformance testing by UNIFIX
OAC> PCI: PCI BIOS revision 2.10 entry at 0xfb400
OAC> PCI: Using configuration type 1
OAC> PCI: Probing PCI hardware
OAC> PCI: 00:38 [1106/0596]: Work around ISA DMA hangs (00)
OAC> Activating ISA DMA hang workarounds.
OAC> Linux NET4.0 for Linux 2.2
OAC> Based upon Swansea University Computer Society NET3.039
OAC> NET4: Unix domain sockets 1.0 for Linux NET4.0.
OAC> NET4: Linux TCP/IP 1.0 for NET4.0
OAC> IP Protocols: ICMP, UDP, TCP
OAC> TCP: Hash tables configured (ehash 65536 bhash 65536)
OAC> IPv4 over IPv4 tunneling driver
OAC> early initialization of device tunl0 is deferred
OAC> GRE over IPv4 tunneling driver
OAC> early initialization of device gre0 is deferred
OAC> Initializing RT netlink socket
OAC> Starting kswapd v 1.5
OAC> Detected PS/2 Mouse Port.
OAC> Serial driver version 4.27 with no serial options enabled
OAC> ttyS00 at 0x03f8 (irq = 4) is a 16550A
OAC> ttyS01 at 0x02f8 (irq = 3) is a 16550A
OAC> pty: 256 Unix98 ptys configured
OAC> apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13)
OAC> loop: registered device at major 7
OAC> VP_IDE: IDE controller on PCI bus 00 dev 39
OAC> VP_IDE: not 100% native mode: will probe irqs later
OAC> ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
OAC> ide0: VIA Bus-Master (U)DMA Timing Config Success
OAC> ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio
OAC> ide1: VIA Bus-Master (U)DMA Timing Config Success
OAC> hda: Maxtor 91021U2, ATA DISK drive
OAC> hdb: ATAPI CD-ROM DRIVE 40X MAXIMUM, ATAPI CDROM drive
OAC> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
OAC> hda: Maxtor 91021U2, 9770MB w/512kB Cache, CHS=1245/255/63
OAC> hdb: ATAPI 40X CD-ROM drive, 128kB Cache
OAC> Uniform CD-ROM driver Revision: 3.11
OAC> Floppy drive(s): fd0 is 1.44M
OAC> FDC 0 is a post-1991 82077
OAC> eepro100.c:v1.09j-t 9/29/99 Donald Becker
OAC> http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
OAC> eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V.
OAC> Savochkin <saw@saw.sw.com.sg> and others
OAC> eth0: Intel PCI EtherExpress Pro100 82557, 00:02:B3:2E:EA:31, IRQ 5.
OAC> Receiver lock-up bug exists -- enabling work-around.
OAC> Board assembly 751767-003, Physical connectors present: RJ45
OAC> Primary interface chip i82555 PHY #1.
OAC> Secondary interface chip i82555.
OAC> General self-test: passed.
OAC> Serial sub-system self-test: passed.
OAC> Internal registers self-test: passed.
OAC> ROM checksum self-test: passed (0x3258698e).
OAC> eth1: Intel PCI EtherExpress Pro100 82557, 00:02:B3:2E:DC:45, IRQ 7.
OAC> Receiver lock-up bug exists -- enabling work-around.
OAC> Board assembly 751767-003, Physical connectors present: RJ45
OAC> Primary interface chip i82555 PHY #1.
OAC> Secondary interface chip i82555.
OAC> General self-test: passed.
OAC> Serial sub-system self-test: passed.
OAC> Internal registers self-test: passed.
OAC> ROM checksum self-test: passed (0x3258698e).
OAC> eepro100.c:v1.09j-t 9/29/99 Donald Becker
OAC> http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
OAC> eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V.
OAC> Savochkin <saw@saw.sw.com.sg> and others
OAC> Partition check:
OAC> hda: hda1 hda2 < hda5 > hda3
OAC> VFS: Mounted root (ext2 filesystem) readonly.
OAC> Freeing unused kernel memory: 40k freed
OAC> Adding Swap: 232932k swap-space (priority -1)
OAC> eth0: card reports no RX buffers.
OAC> eth0: card reports no resources.
OAC> eth0: card reports no RX buffers.
OAC> eth0: card reports no resources.
OAC> eth0: card reports no RX buffers.
OAC> eth0: card reports no resources.
OAC> eth0: card reports no RX buffers.
OAC> eth0: card reports no resources.
OAC> eth0: card reports no RX buffers.
OAC> eth0: card reports no resources.

OAC> И так до бесконечности , иногда помагает ifup eth0 ; ifdown eth0
OAC> Вопрос - Как отучить?




OAC> -- 
OAC> To UNSUBSCRIBE, email to debian-russian-request@lists.debian.org
OAC> with a subject of "unsubscribe". Trouble? Contact
OAC> listmaster@lists.debian.org


--



Reply to: