Your message dated Tue, 9 Apr 2013 21:16:56 +0200 with message-id <20130409191656.GP5725@radis.cristau.org> and subject line Re: Bug#698381: unblock: ifupdown/0.7.7 has caused the Debian Bug report #698381, regarding unblock: ifupdown/0.7.7 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 698381: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=698381 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: unblock: ifupdown/0.7.6
- From: Andrew Shadura <bugzilla@tut.by>
- Date: Thu, 17 Jan 2013 19:58:31 +0100
- Message-id: <20130117185831.19170.86801.reportbug@localhost.localdomain>
Package: release.debian.org Severity: normal User: release.debian.org@packages.debian.org Usertags: unblock Please unblock package ifupdown. This release fixes some important issues with ifupdown, and also brings upstart support up to date. ifupdown (0.7.6) unstable; urgency=low [ Andrew O. Shadura ] * Don't configure bridge interfaces as tagged VLAN interfaces (Closes: #696642). * Add "tryonce" option to DHCP-enabled methods (Closes: #694541). * Update manual pages. [ Stéphane Graber ] * Patches for upstart support from Ubuntu: - Start the job on runlevel [2345]. This is a no-op during a normal boot since the network will be started *before* runlevel is emitted, but is needed to restart the network after a change from runlevel 1 (LP: #752481). - Don't bring 'lo' down (add it to --exclude). - Emit deconfiguring-networking (LP: #1061639). - Update network-interface-security job to stop when the parent job is stopped itself. This avoids leftover instances (LP: #1065684). * Set MTU of tunnel devices (LP: #1074048). * Actually set the new calculated value for duplicate entries (LP: #1086517). unblock ifupdown/0.7.6 -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 3.6-trunk-686-pae (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_GB.UTF-8) Shell: /bin/sh linked to /bin/dashdiff -Nru ifupdown-0.7.5/debian/changelog ifupdown-0.7.6/debian/changelog --- ifupdown-0.7.5/debian/changelog 2012-11-02 18:31:00.000000000 +0100 +++ ifupdown-0.7.6/debian/changelog 2013-01-08 01:47:04.000000000 +0100 @@ -1,3 +1,27 @@ +ifupdown (0.7.6) unstable; urgency=low + + [ Andrew O. Shadura ] + * Don't configure bridge interfaces as tagged VLAN interfaces + (Closes: #696642). + * Add "tryonce" option to DHCP-enabled methods (Closes: #694541). + * Update manual pages. + + [ Stéphane Graber ] + * Patches for upstart support from Ubuntu: + - Start the job on runlevel [2345]. This is a no-op during a normal + boot since the network will be started *before* runlevel is emitted, + but is needed to restart the network after a change from runlevel 1 + (LP: #752481). + - Don't bring 'lo' down (add it to --exclude). + - Emit deconfiguring-networking (LP: #1061639). + - Update network-interface-security job to stop when the parent job is + stopped itself. This avoids leftover instances (LP: #1065684). + * Set MTU of tunnel devices (LP: #1074048). + * Actually set the new calculated value for duplicate entries + (LP: #1086517). + + -- Andrew O. Shadura <bugzilla@tut.by> Sun, 06 Jan 2013 19:36:49 +0100 + ifupdown (0.7.5) unstable; urgency=low * Fix upstart hooks (Closes: #692110). diff -Nru ifupdown-0.7.5/debian/ifupdown.networking.upstart ifupdown-0.7.6/debian/ifupdown.networking.upstart --- ifupdown-0.7.5/debian/ifupdown.networking.upstart 2012-10-16 10:38:55.000000000 +0200 +++ ifupdown-0.7.6/debian/ifupdown.networking.upstart 2013-01-06 19:26:34.000000000 +0100 @@ -7,9 +7,10 @@ emits static-network-up emits net-device-up +emits deconfiguring-networking start on (local-filesystems - and (stopped udevtrigger or container)) + and (stopped udevtrigger or container)) or runlevel [2345] stop on unmounted-remote-filesystems pre-start script @@ -62,5 +63,8 @@ check_network_file_systems check_network_swap - ifdown -a + + # Anything that manages network interfaces *MUST* wait for this event + initctl emit deconfiguring-networking + ifdown -a --exclude=lo end script diff -Nru ifupdown-0.7.5/debian/ifupdown.network-interface-security.upstart ifupdown-0.7.6/debian/ifupdown.network-interface-security.upstart --- ifupdown-0.7.5/debian/ifupdown.network-interface-security.upstart 2012-10-16 10:38:55.000000000 +0200 +++ ifupdown-0.7.6/debian/ifupdown.network-interface-security.upstart 2013-01-06 19:36:14.000000000 +0100 @@ -12,6 +12,9 @@ start on (starting network-interface or starting network-manager or starting networking) +stop on (stopped network-interface JOB=$JOB INTERFACE=$INTERFACE + or stopped network-manager JOB=$JOB + or stopped networking JOB=$JOB) # In order to handle the lack of upstart feature LP: #568860, we need to # run multiple times, for each of the above "starting" service instances, or diff -Nru ifupdown-0.7.5/debian/testbuild-linux ifupdown-0.7.6/debian/testbuild-linux --- ifupdown-0.7.5/debian/testbuild-linux 2012-10-16 10:38:04.000000000 +0200 +++ ifupdown-0.7.6/debian/testbuild-linux 2013-01-07 01:42:19.000000000 +0100 @@ -344,7 +344,7 @@ cat >tests/testcase.7 <<EOF # RUN: -a -auto eth0 eth0.1 eth0.0201 tunnel +auto eth0 eth0.1 eth0.0201 br0.0201 br0.0202 tunnel iface eth0 inet static address 1.2.3.4 netmask 255.255.255.0 @@ -358,6 +358,9 @@ netmask 64 iface eth0.0201 inet static address 192.168.0.1/25 +iface br0.0201 inet manual + bridge_ports eth0.0201 +iface br0.0202 inet manual iface tunnel inet6 6to4 local 1.2.3.4 EOF @@ -399,6 +402,13 @@ ip link set dev eth0.0201 up run-parts --verbose /etc/network/if-up.d +Configuring interface br0.0201=br0.0201 (inet) +run-parts --verbose /etc/network/if-pre-up.d +run-parts --verbose /etc/network/if-up.d +if test -d /sys/class/net/br0 -a ! -d /sys/class/net/br0.0202 ; then ip link set up dev br0; ip link add link br0 name br0.0202 type vlan id 202; fi +Configuring interface br0.0202=br0.0202 (inet) +run-parts --verbose /etc/network/if-pre-up.d +run-parts --verbose /etc/network/if-up.d Configuring interface tunnel=tunnel (inet6) run-parts --verbose /etc/network/if-pre-up.d modprobe -q net-pf-10 > /dev/null 2>&1 || true # ignore failure. @@ -486,8 +496,114 @@ run-parts --verbose /etc/network/if-up.d EOF +cat >tests/testcase.10 <<EOF +# RUN: -a +auto eth0 eth1 eth2 eth3 + +iface eth0 inet dhcp + +iface eth0 inet6 dhcp + +iface eth1 inet dhcp + tryonce yes + +iface eth1 inet6 dhcp + tryonce yes + +iface eth2 inet dhcp + tryonce no + +iface eth2 inet6 dhcp + tryonce no + +iface eth3 inet6 auto + dhcp yes + tryonce yes + +iface eth3 inet6 auto + dhcp yes + tryonce no + +iface eth3 inet6 auto + dhcp no + tryonce yes + +EOF +cat >tests/up.10 <<EOF +====stdout==== +====stderr==== +run-parts --verbose /etc/network/if-pre-up.d +Configuring interface eth0=eth0 (inet) +run-parts --verbose /etc/network/if-pre-up.d + +dhclient -1 -v -pf /run/dhclient.eth0.pid -lf /var/lib/dhcp/dhclient.eth0.leases eth0 +run-parts --verbose /etc/network/if-up.d +Configuring interface eth0=eth0 (inet6) +run-parts --verbose /etc/network/if-pre-up.d +modprobe -q net-pf-10 > /dev/null 2>&1 || true # ignore failure. +sysctl -q -e -w net.ipv6.conf.eth0.accept_ra=0 + +ip link set dev eth0 up +dhclient -6 -1 -pf /run/dhclient6.eth0.pid -lf /var/lib/dhcp/dhclient6.eth0.leases eth0 +run-parts --verbose /etc/network/if-up.d +Configuring interface eth1=eth1 (inet) +run-parts --verbose /etc/network/if-pre-up.d + +dhclient -1 -v -pf /run/dhclient.eth1.pid -lf /var/lib/dhcp/dhclient.eth1.leases eth1 +run-parts --verbose /etc/network/if-up.d +Configuring interface eth1=eth1 (inet6) +run-parts --verbose /etc/network/if-pre-up.d +modprobe -q net-pf-10 > /dev/null 2>&1 || true # ignore failure. +sysctl -q -e -w net.ipv6.conf.eth1.accept_ra=0 + +ip link set dev eth1 up +dhclient -6 -1 -pf /run/dhclient6.eth1.pid -lf /var/lib/dhcp/dhclient6.eth1.leases eth1 +run-parts --verbose /etc/network/if-up.d +Configuring interface eth2=eth2 (inet) +run-parts --verbose /etc/network/if-pre-up.d + +dhclient -v -pf /run/dhclient.eth2.pid -lf /var/lib/dhcp/dhclient.eth2.leases eth2 +run-parts --verbose /etc/network/if-up.d +Configuring interface eth2=eth2 (inet6) +run-parts --verbose /etc/network/if-pre-up.d +modprobe -q net-pf-10 > /dev/null 2>&1 || true # ignore failure. +sysctl -q -e -w net.ipv6.conf.eth2.accept_ra=0 + +ip link set dev eth2 up +dhclient -6 -pf /run/dhclient6.eth2.pid -lf /var/lib/dhcp/dhclient6.eth2.leases eth2 +run-parts --verbose /etc/network/if-up.d +Configuring interface eth3=eth3 (inet6) +run-parts --verbose /etc/network/if-pre-up.d +modprobe -q net-pf-10 > /dev/null 2>&1 || true # ignore failure. + +sysctl -q -e -w net.ipv6.conf.eth3.accept_ra=1 +sysctl -q -e -w net.ipv6.conf.eth3.autoconf=1 +ip link set dev eth3 up +dhclient -6 -1 -S -pf /run/dhclient6.eth3.pid -lf /var/lib/dhcp/dhclient6.eth3.leases eth3 +run-parts --verbose /etc/network/if-up.d +Configuring interface eth3=eth3 (inet6) +run-parts --verbose /etc/network/if-pre-up.d +modprobe -q net-pf-10 > /dev/null 2>&1 || true # ignore failure. + +sysctl -q -e -w net.ipv6.conf.eth3.accept_ra=1 +sysctl -q -e -w net.ipv6.conf.eth3.autoconf=1 +ip link set dev eth3 up +dhclient -6 -S -pf /run/dhclient6.eth3.pid -lf /var/lib/dhcp/dhclient6.eth3.leases eth3 +run-parts --verbose /etc/network/if-up.d +Configuring interface eth3=eth3 (inet6) +run-parts --verbose /etc/network/if-pre-up.d +modprobe -q net-pf-10 > /dev/null 2>&1 || true # ignore failure. + +sysctl -q -e -w net.ipv6.conf.eth3.accept_ra=1 +sysctl -q -e -w net.ipv6.conf.eth3.autoconf=1 +ip link set dev eth3 up +run-parts --verbose /etc/network/if-up.d +run-parts --verbose /etc/network/if-up.d +EOF + + result=true -for test in 1 2 3 4 5 6 7 8 9; do +for test in 1 2 3 4 5 6 7 8 9 10; do args="$(cat tests/testcase.$test | sed -n 's/^# RUN: //p')" ./ifup -nv --force -i tests/testcase.$test $args \ >tests/up-res-out.$test 2>tests/up-res-err.$test || diff -Nru ifupdown-0.7.5/ifupdown.nw ifupdown-0.7.6/ifupdown.nw --- ifupdown-0.7.5/ifupdown.nw 2012-10-16 10:38:04.000000000 +0200 +++ ifupdown-0.7.6/ifupdown.nw 2013-01-07 01:42:19.000000000 +0100 @@ -161,7 +161,7 @@ $(patsubst %.defn,%.o,$(DEFNFILES)) arch$(ARCH).o meta.o link.o MAN := $(patsubst %.defn,%.man,$(DEFNFILES)) -DEFNFILES += meta.defn +DEFNFILES += meta.defn link.defn default : executables all : executables docs @@ -2144,6 +2144,7 @@ currif->option[i].value[l] = '\n'; strcpy(&(currif->option[i].value[l + 1]), rest); + strcpy(rest, currif->option[i].value); } } } @@ -3212,11 +3213,14 @@ varvalue = get_var(command, namelen, ifd); @ -We also define an exported [[var_true()]] function to allow methods to -have lines of code that are conditional on the value of a variable. +We also define an exported [[var_true()]], [[var_set()]] and [[var_set_anywhere()]] functions +to allow methods to have lines of code that are conditional on the value +of a variable. <<exported symbols>>= int var_true(char *id, interface_defn *ifd); +int var_set(char *id, interface_defn *ifd); +int var_set_anywhere(char *id, interface_defn *ifd); @ <<execute functions>>= @@ -3225,7 +3229,7 @@ varvalue = get_var(id, strlen(id), ifd); if (varvalue) { - if (strcmp(varvalue, "1") == 0 || + if (atoi(varvalue) || strcasecmp(varvalue, "on") == 0 || strcasecmp(varvalue, "true") == 0 || strcasecmp(varvalue, "yes") == 0) @@ -3239,6 +3243,34 @@ } else return 0; } + +int var_set(char *id, interface_defn *ifd) { + char *varvalue; + + varvalue = get_var(id, strlen(id), ifd); + if (varvalue) { + free(varvalue); + return 1; + } else { + return 0; + } +} + +int var_set_anywhere(char *id, interface_defn *ifd) { + char *varvalue; + interface_defn *currif; + + for (currif = defn->ifaces; currif; currif = currif->next) { + if (strcmp(ifd->logical_iface, currif->logical_iface) == 0) { + varvalue = get_var(id, strlen(id), currif); + if (varvalue) { + free(varvalue); + return 1; + } + } + } + return 0; +} @ \subsection{Mapping Scripts} @@ -3876,7 +3908,11 @@ Since this has all been covered in a previous section, this is pretty trivial. -<<variables local to main>>= +<<exported symbols>>= +extern interfaces_file *defn; +@ + +<<main global variables>>= interfaces_file *defn; @ @@ -4064,6 +4100,7 @@ if (!okay && <<we're bringing interfaces up>>) { interface_defn link = { .real_iface = iface, + .logical_iface = liface, .max_options = 0, .address_family = &addr_link, .method = &(addr_link.method[0]), @@ -4649,6 +4686,7 @@ void set_preferred_lft(interface_defn *ifd, char **pparam, int argc, char ** argv); void get_token(interface_defn *ifd, char **pparam, int argc, char ** argv); void to_decimal(interface_defn *ifd, char **pparam, int argc, char ** argv); +void map_value(interface_defn *ifd, char **pparam, int argc, char ** argv); @ <<common functions implementations>>= @@ -4873,6 +4911,28 @@ snprintf(*pparam, strlen(*pparam) + 1, "%ld", value); } +void map_value(interface_defn *ifd UNUSED, char **pparam, int argc, char ** argv) +{ + if (argc < 2) return; + + int value; + if (argc == 2) { + value = (atoi(*pparam) || + strcasecmp(*pparam, "on") == 0 || + strcasecmp(*pparam, "true") == 0 || + strcasecmp(*pparam, "yes") == 0); + } + if ((value < argc) && (argv[value] != NULL)) { + *pparam = realloc(*pparam, strlen(argv[value]) + 1); + if (*pparam == NULL) return; + strcpy(*pparam, argv[value]); + } else { + *pparam = realloc(*pparam, 1); + if (*pparam == NULL) return; + *pparam[0] = 0; + } +} + @ \subsection{Linux-specific functions} @@ -5081,16 +5141,18 @@ vendor vendor -- Vendor class identifier (dhcpcd) client client -- Client identifier (dhcpcd, udhcpc) hwaddress address -- Hardware address. + tryonce bool -- Try to acquire lease just once (dhclient). [yes] conversion hwaddress cleanup_hwaddress + tryonce (map_value "" -1) up [[ip link set dev %iface% address %hwaddress%]] - dhclient -1 -v -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp/dhclient.%iface%.leases %iface% \ + dhclient [[%tryonce%]] -v -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp/dhclient.%iface%.leases %iface% \ [[-e IF_METRIC=%metric%]] \ if (execable("/sbin/dhclient")) - dhclient3 -1 -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp3/dhclient.%iface%.leases %iface% \ + dhclient3 [[%tryonce%]] -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp3/dhclient.%iface%.leases %iface% \ [[-e IF_METRIC=%metric%]] \ elsif (execable("/sbin/dhclient3")) pump -i %iface% [[-h %hostname%]] [[-l %leasehours%]] \ @@ -5160,7 +5222,7 @@ up ip tunnel add %iface% mode %mode% remote %endpoint% [[local %local%]] \ [[ttl %ttl%]] - ip link set %iface% up + ip link set %iface% up [[mtu %mtu%]] ip addr add %address%/%netmask% dev %iface% [[peer %dstaddr%]] [[ ip route add default via %gateway% ]] down @@ -5239,13 +5301,18 @@ options privext int -- Privacy extensions (RFC3041) (0=off, 1=assign, 2=prefer) dhcp int -- Use stateless DHCPv6 (0=off, 1=on) + tryonce bool -- For DHCPv6, try to acquire lease just once. [yes] + + conversion + tryonce (map_value "" -1) + up modprobe -q net-pf-10 > /dev/null 2>&1 || true # ignore failure. [[sysctl -q -e -w net.ipv6.conf.%iface/.//%.use_tempaddr=%privext%]] sysctl -q -e -w net.ipv6.conf.%iface/.//%.accept_ra=1 sysctl -q -e -w net.ipv6.conf.%iface/.//%.autoconf=1 ip link set dev %iface% up - dhclient -6 -1 -S -pf /run/dhclient6.%iface%.pid -lf /var/lib/dhcp/dhclient6.%iface%.leases %iface% \ + dhclient -6 [[%tryonce%]] -S -pf /run/dhclient6.%iface%.pid -lf /var/lib/dhcp/dhclient6.%iface%.leases %iface% \ if (var_true("dhcp", ifd) && execable("/sbin/dhclient")) down ip -6 addr flush dev %iface% scope global @@ -5322,16 +5389,18 @@ hwaddress address -- Hardware address accept_ra int -- Accept router advertisements (0=off, 1=on) [0] autoconf int -- Perform stateless autoconfiguration (0=off, 1=on) + tryonce bool -- Try to acquire lease just once. [yes] conversion hwaddress cleanup_hwaddress + tryonce (map_value "" -1) up modprobe -q net-pf-10 > /dev/null 2>&1 || true # ignore failure. [[sysctl -q -e -w net.ipv6.conf.%iface/.//%.accept_ra=%accept_ra%]] [[sysctl -q -e -w net.ipv6.conf.%iface/.//%.autoconf=%autoconf%]] ip link set dev %iface% [[address %hwaddress%]] up - dhclient -6 -1 -pf /run/dhclient6.%iface%.pid -lf /var/lib/dhcp/dhclient6.%iface%.leases %iface% \ + dhclient -6 [[%tryonce%]] -pf /run/dhclient6.%iface%.pid -lf /var/lib/dhcp/dhclient6.%iface%.leases %iface% \ if (execable("/sbin/dhclient")) down @@ -5568,16 +5637,18 @@ vendor vendor -- Vendor class identifier (dhcpcd) client client -- Client identifier (dhcpcd, udhcpc) hwaddress address -- Hardware Address. + tryonce bool -- Try to acquire lease just once (dhclient). [yes] conversion hwaddress cleanup_hwaddress + tryonce (map_value "" -1) up [[ifconfig %iface% link %hwaddress%]] - dhclient -1 -v -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp/dhclient.%iface%.leases %iface% \ + dhclient [[%tryonce%]] -v -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp/dhclient.%iface%.leases %iface% \ [[-e IF_METRIC=%metric%]] \ if (execable("/sbin/dhclient")) - dhclient3 -1 -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp3/dhclient.%iface%.leases %iface% \ + dhclient3 [[%tryonce%]] -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp3/dhclient.%iface%.leases %iface% \ [[-e IF_METRIC=%metric%]] \ elsif (execable("/sbin/dhclient3")) udhcpc -n -p /run/udhcpc.%iface%.pid -i %iface% [[-H %hostname%]] \ @@ -5657,13 +5728,15 @@ options hwaddress address -- Hardware address + tryonce bool -- Try to acquire lease just once. [yes] conversion hwaddress cleanup_hwaddress + tryonce (map_value "" -1) up ifconfig %iface% [[link %hwaddress%]] up - dhclient -6 -1 -pf /run/dhclient6.%iface%.pid -lf /var/lib/dhcp/dhclient6.%iface%.leases %iface% \ + dhclient -6 [[%tryonce%]] -pf /run/dhclient6.%iface%.pid -lf /var/lib/dhcp/dhclient6.%iface%.leases %iface% \ if (execable("/sbin/dhclient")) down @@ -5758,13 +5831,15 @@ vendor vendor -- Vendor class identifier (dhcpcd) client client -- Client identifier (dhcpcd, udhcpc) hwaddress address -- Hardware Address (Not yet supported) + tryonce bool -- Try to acquire lease just once (dhclient). [yes] conversion hwaddress cleanup_hwaddress + tryonce (map_value "" -1) up [[Warning: Option hwaddress: %hwaddress% not yet supported]] - dhclient -1 -v -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp/dhclient.%iface%.leases %iface% \ + dhclient [[%tryonce%]] -v -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp/dhclient.%iface%.leases %iface% \ if (execable("/sbin/dhclient")) udhcpc -n -p /run/udhcpc.%iface%.pid -i %iface% [[-H %hostname%]] \ [[-c %client%]] \ @@ -5839,14 +5914,16 @@ options hwaddress address -- Hardware address (Not yet supported) + tryonce bool -- Try to acquire lease just once. [yes] conversion hwaddress cleanup_hwaddress + tryonce (map_value "" -1) up [[Warning: Option hwaddress: %hwaddress% not yet supported]] inetutils-ifconfig --interface %iface% --up - dhclient -6 -1 -pf /run/dhclient6.%iface%.pid -lf /var/lib/dhcp/dhclient6.%iface%.leases %iface% \ + dhclient -6 [[%tryonce%]] -pf /run/dhclient6.%iface%.pid -lf /var/lib/dhcp/dhclient6.%iface%.leases %iface% \ if (execable("/sbin/dhclient")) down @@ -5900,9 +5977,9 @@ then \ ip link set up dev %link%; \ ip link add link %link% name %iface0% type vlan id %vlan_id%; \ - fi if (iface_has(".")) + fi if (iface_has(".") && (!var_set_anywhere("bridge_ports", ifd))) down - ip link del %iface% if (iface_has(".")) + ip link del %iface% if (iface_has(".") && (!var_set_anywhere("bridge_ports", ifd))) architecture kfreebsd diff -Nru ifupdown-0.7.5/interfaces.5.pre ifupdown-0.7.6/interfaces.5.pre --- ifupdown-0.7.5/interfaces.5.pre 2012-06-21 23:52:38.000000000 +0200 +++ ifupdown-0.7.6/interfaces.5.pre 2013-01-06 19:26:34.000000000 +0100 @@ -137,6 +137,24 @@ .P Options are usually indented for clarity (as in the example above) but are not required to be. +.P +.SH VLAN AND BRIDGE INTERFACES +To ease the configuration of VLAN interfaces, interfaces having +.B . +(full stop character) in the name are configured as 802.1q tagged +virtual LAN interface. For example, interface +.B eth0.1 +is a virtual interface having +.B eth0 +as physical link, with VLAN ID 1. +.P +For compatibility with +.B bridge-utils +package, if +.B bridge_ports +option is specified, VLAN interface configuration is +.B not +performed. .SH IFACE OPTIONS The following "command" options are available for every family and method. Each of these options can be given multiple times in a single stanza, @@ -278,7 +296,8 @@ .BR ifup (8), .BR ip (8), .BR ifconfig (8), -.BR run\-parts (8). +.BR run\-parts (8), +.BR resolvconf (8). .P For advice on configuring this package read the .B Network Configuration
--- End Message ---
--- Begin Message ---
- To: Andrew Shadura <bugzilla@tut.by>, 698381-done@bugs.debian.org
- Cc: Steven Chamberlain <steven@pyro.eu.org>
- Subject: Re: Bug#698381: unblock: ifupdown/0.7.7
- From: Julien Cristau <jcristau@debian.org>
- Date: Tue, 9 Apr 2013 21:16:56 +0200
- Message-id: <20130409191656.GP5725@radis.cristau.org>
- In-reply-to: <20130331155306.40797256@ileemo>
- References: <20130117185831.19170.86801.reportbug@localhost.localdomain> <20130325104245.GB5840@radis.cristau.org> <51583E53.7020007@pyro.eu.org> <20130331155306.40797256@ileemo>
On Sun, Mar 31, 2013 at 15:53:06 +0200, Andrew Shadura wrote: > Hello, > > On Sun, 31 Mar 2013 14:46:59 +0100 > Steven Chamberlain <steven@pyro.eu.org> wrote: > > > Control: retitle -1 unblock: ifupdown/0.7.7 > > Steven, thanks for updating the unblock request; I should've done that > myself and forgot to. > Unblocked now. Cheers, JulienAttachment: signature.asc
Description: Digital signature
--- End Message ---