Bug#606788: marked as done (wdm: package fails to upgrade properly from lenny)

[owner@bugs.debian.org (Debian Bug Tracking System)]

Your message dated Thu, 16 Dec 2010 14:47:25 +0000
with message-id <E1PTF77-00026y-Nl@franck.debian.org>
and subject line Bug#606788: fixed in wdm 1.28-5
has caused the Debian Bug report #606788,
regarding wdm: package fails to upgrade properly from lenny
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
606788: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=606788
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems

--- Begin Message ---

• To: submit@bugs.debian.org
• Subject: wdm: package fails to upgrade properly from lenny
• From: Lucas Nussbaum <lucas@lucas-nussbaum.net>
• Date: Sat, 11 Dec 2010 18:13:31 +0100
• Message-id: <[🔎] 20101211171331.GA7833@xanadu.blop.info>

Package: wdm
Version: 1.28-4
Severity: serious
User: debian-qa@lists.debian.org
Usertags: instest-20101211 instest

Hi,

While testing the installation of all packages in squeeze, I ran
into the following problem:

> -- Now testing upgrade from lenny64-instest.
> -- Finding version in lenny64-instest: wdm 1.28-3
> -- Installing wdm in lenny64-instest: OK
> Reading package lists...
> Building dependency tree...
> Reading state information...
> Starting
> Starting 2
> Done
> The following extra packages will be installed:
> cpp cpp-4.3 defoma file fontconfig-config ifupdown libdrm2 libexpat1
> libfontconfig1 libfontenc1 libfreetype6 libfribidi0 libfs6 libgdbm3 libgif4
> libgl1-mesa-glx libgmp3c2 libice6 libjpeg62 libmagic1 libmpfr1ldbl
> libnewt0.52 libpng12-0 libpopt0 libsm6 libtiff4 libwraster3 libx11-6
> libx11-data libxau6 libxaw7 libxcb-xlib0 libxcb1 libxcursor1 libxdamage1
> libxdmcp6 libxext6 libxfixes3 libxfont1 libxft2 libxi6 libxinerama1
> libxkbfile1 libxmu6 libxmuu1 libxpm4 libxrandr2 libxrender1 libxt6 libxtrap6
> libxtst6 libxv1 libxxf86dga1 libxxf86misc1 libxxf86vm1 net-tools netbase
> perl perl-modules psmisc ttf-dejavu ttf-dejavu-core ttf-dejavu-extra ucf
> whiptail x11-apps x11-common x11-session-utils x11-utils x11-xfs-utils
> x11-xserver-utils xfonts-encodings xfonts-utils xutils xutils-dev
> Suggested packages:
> cpp-doc gcc-4.3-locales defoma-doc dfontmgr psfontmgr x-ttcidfont-conf
> iproute dhcp3-client dhcp-client ppp libfreetype6-dev perl-doc
> libterm-readline-gnu-perl libterm-readline-perl-perl xfonts-base xfs
> mesa-utils
> Recommended packages:
> libft-perl
> The following NEW packages will be installed:
> cpp cpp-4.3 defoma file fontconfig-config ifupdown libdrm2 libexpat1
> libfontconfig1 libfontenc1 libfreetype6 libfribidi0 libfs6 libgdbm3 libgif4
> libgl1-mesa-glx libgmp3c2 libice6 libjpeg62 libmagic1 libmpfr1ldbl
> libnewt0.52 libpng12-0 libpopt0 libsm6 libtiff4 libwraster3 libx11-6
> libx11-data libxau6 libxaw7 libxcb-xlib0 libxcb1 libxcursor1 libxdamage1
> libxdmcp6 libxext6 libxfixes3 libxfont1 libxft2 libxi6 libxinerama1
> libxkbfile1 libxmu6 libxmuu1 libxpm4 libxrandr2 libxrender1 libxt6 libxtrap6
> libxtst6 libxv1 libxxf86dga1 libxxf86misc1 libxxf86vm1 net-tools netbase
> perl perl-modules psmisc ttf-dejavu ttf-dejavu-core ttf-dejavu-extra ucf wdm
> whiptail x11-apps x11-common x11-session-utils x11-utils x11-xfs-utils
> x11-xserver-utils xfonts-encodings xfonts-utils xutils xutils-dev
> 0 upgraded, 76 newly installed, 0 to remove and 0 not upgraded.
> Need to get 24.5MB of archives.
> After this operation, 78.7MB of additional disk space will be used.
> Get:1 http://localhost lenny/main x11-common 1:7.3+20 [343kB]
> Get:2 http://localhost lenny/main libxau6 1:1.0.3-3 [12.5kB]
> Get:3 http://localhost lenny/main libxdmcp6 1:1.0.2-3 [17.9kB]
> Get:4 http://localhost lenny/main libxcb1 1.1-1.2 [47.5kB]
> Get:5 http://localhost lenny/main libxcb-xlib0 1.1-1.2 [15.4kB]
> Get:6 http://localhost lenny/main libx11-data 2:1.1.5-2 [169kB]
> Get:7 http://localhost lenny/main libx11-6 2:1.1.5-2 [660kB]
> Get:8 http://localhost lenny/main libxfixes3 1:4.0.3-2 [10.8kB]
> Get:9 http://localhost lenny/main libice6 2:1.0.4-1 [50.1kB]
> Get:10 http://localhost lenny/main libsm6 2:1.0.3-2 [23.4kB]
> Get:11 http://localhost lenny/main libxt6 1:1.0.5-3 [185kB]
> Get:12 http://localhost lenny/main libpng12-0 1.2.27-2+lenny4 [168kB]
> Get:13 http://localhost lenny/main libxext6 2:1.0.4-2 [37.3kB]
> Get:14 http://localhost lenny/main libxmu6 2:1.0.4-1 [55.4kB]
> Get:15 http://localhost lenny/main libxpm4 1:3.5.7-1 [41.9kB]
> Get:16 http://localhost lenny/main libxaw7 2:1.0.4-2 [203kB]
> Get:17 http://localhost lenny/main libxrender1 1:0.9.4-2 [28.1kB]
> Get:18 http://localhost lenny/main libxcursor1 1:1.1.9-1 [25.6kB]
> Get:19 http://localhost lenny/main libexpat1 2.0.1-4+lenny3 [137kB]
> Get:20 http://localhost lenny/main libfreetype6 2.3.7-2+lenny4 [386kB]
> Get:21 http://localhost lenny/main ucf 3.0016 [64.4kB]
> Get:22 http://localhost lenny/main libmagic1 4.26-1 [369kB]
> Get:23 http://localhost lenny/main file 4.26-1 [44.5kB]
> Get:24 http://localhost lenny/main perl-modules 5.10.0-19lenny2 [3198kB]
> Get:25 http://localhost lenny/main libgdbm3 1.8.3-3 [23.4kB]
> Get:26 http://localhost lenny/main perl 5.10.0-19lenny2 [5220kB]
> Get:27 http://localhost lenny/main libnewt0.52 0.52.2-11.3+lenny1 [72.1kB]
> Get:28 http://localhost lenny/main libpopt0 1.14-4 [46.4kB]
> Get:29 http://localhost lenny/main whiptail 0.52.2-11.3+lenny1 [35.8kB]
> Get:30 http://localhost lenny/main defoma 0.11.10-0.2 [101kB]
> Get:31 http://localhost lenny/main ttf-dejavu-core 2.25-3 [1360kB]
> Get:32 http://localhost lenny/main ttf-dejavu-extra 2.25-3 [2982kB]
> Get:33 http://localhost lenny/main ttf-dejavu 2.25-3 [25.8kB]
> Get:34 http://localhost lenny/main fontconfig-config 2.6.0-3 [64.7kB]
> Get:35 http://localhost lenny/main libfontconfig1 2.6.0-3 [121kB]
> Get:36 http://localhost lenny/main libxft2 2.1.12-3 [52.1kB]
> Get:37 http://localhost lenny/main libxkbfile1 1:1.0.5-1 [74.8kB]
> Get:38 http://localhost lenny/main libxmuu1 2:1.0.4-1 [13.7kB]
> Get:39 http://localhost lenny/main libgmp3c2 2:4.2.2+dfsg-3 [207kB]
> Get:40 http://localhost lenny/main libmpfr1ldbl 2.3.1.dfsg.1-2 [347kB]
> Get:41 http://localhost lenny/main cpp-4.3 4.3.2-1.1 [3370kB]
> Get:42 http://localhost lenny/main cpp 4:4.3.2-2 [13.9kB]
> Get:43 http://localhost lenny/main x11-apps 7.3+4 [395kB]
> Get:44 http://localhost lenny/main x11-session-utils 7.3+1 [78.4kB]
> Get:45 http://localhost lenny/main libfontenc1 1:1.0.4-3 [19.1kB]
> Get:46 http://localhost lenny/main libdrm2 2.3.1-2 [261kB]
> Get:47 http://localhost lenny/main libxdamage1 1:1.1.1-4 [10.5kB]
> Get:48 http://localhost lenny/main libxxf86vm1 1:1.0.2-1 [15.0kB]
> Get:49 http://localhost lenny/main libgl1-mesa-glx 7.0.3-7 [170kB]
> Get:50 http://localhost lenny/main libxi6 2:1.1.4-1 [26.5kB]
> Get:51 http://localhost lenny/main libxinerama1 2:1.0.3-2 [10.5kB]
> Get:52 http://localhost lenny/main libxtst6 2:1.0.3-1 [13.5kB]
> Get:53 http://localhost lenny/main libxv1 2:1.0.4-1 [16.8kB]
> Get:54 http://localhost lenny/main libxxf86dga1 2:1.0.2-1 [17.3kB]
> Get:55 http://localhost lenny/main x11-utils 7.3+2+nmu1 [223kB]
> Get:56 http://localhost lenny/main libfs6 2:1.0.1-1 [31.2kB]
> Get:57 http://localhost lenny/main x11-xfs-utils 7.3+1 [25.5kB]
> Get:58 http://localhost lenny/main libxrandr2 2:1.2.3-1 [24.0kB]
> Get:59 http://localhost lenny/main libxtrap6 2:1.0.0-5 [19.4kB]
> Get:60 http://localhost lenny/main libxxf86misc1 1:1.0.1-3 [8328B]
> Get:61 http://localhost lenny/main x11-xserver-utils 7.3+5 [191kB]
> Get:62 http://localhost lenny/main xutils-dev 1:7.4+3 [333kB]
> Get:63 http://localhost lenny/main net-tools 1.60-22 [286kB]
> Get:64 http://localhost lenny/main ifupdown 0.6.8+nmu1 [48.0kB]
> Get:65 http://localhost lenny/main netbase 4.34 [18.5kB]
> Get:66 http://localhost lenny/main libfribidi0 0.10.9-1 [44.8kB]
> Get:67 http://localhost lenny/main libgif4 4.1.6-6 [40.9kB]
> Get:68 http://localhost lenny/main libjpeg62 6b-14 [89.4kB]
> Get:69 http://localhost lenny/main libtiff4 3.8.2-11.3 [170kB]
> Get:70 http://localhost lenny/main libwraster3 0.92.0-8 [113kB]
> Get:71 http://localhost lenny/main libxfont1 1:1.3.3-1 [155kB]
> Get:72 http://localhost lenny/main psmisc 22.6-1 [89.6kB]
> Get:73 http://localhost lenny/main xfonts-encodings 1:1.0.2-3 [584kB]
> Get:74 http://localhost lenny/main xfonts-utils 1:7.4+1 [86.0kB]
> Get:75 http://localhost lenny/main xutils 1:7.3+20 [42.7kB]
> Get:76 http://localhost lenny/main wdm 1.28-3 [430kB]
> Extracting templates from packages: 39%
Extracting templates from packages: 78%
Extracting templates from packages: 100%
> Preconfiguring packages ...
> Fetched 24.5MB in 2s (11.5MB/s)
> SELECTING PREVIOUSLY DESELECTED PACKAGE X11-COMMON.

> (READING DATABASE ... 5925 FILES AND DIRECTORIES CURRENTLY INSTALLED.)

> UNPACKING X11-COMMON (FROM .../X11-COMMON_1%3A7.3+20_ALL.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXAU6.

> UNPACKING LIBXAU6 (FROM .../LIBXAU6_1%3A1.0.3-3_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXDMCP6.

> UNPACKING LIBXDMCP6 (FROM .../LIBXDMCP6_1%3A1.0.2-3_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXCB1.

> UNPACKING LIBXCB1 (FROM .../LIBXCB1_1.1-1.2_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXCB-XLIB0.

> UNPACKING LIBXCB-XLIB0 (FROM .../LIBXCB-XLIB0_1.1-1.2_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBX11-DATA.

> UNPACKING LIBX11-DATA (FROM .../LIBX11-DATA_2%3A1.1.5-2_ALL.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBX11-6.

> UNPACKING LIBX11-6 (FROM .../LIBX11-6_2%3A1.1.5-2_AMD64.DEB) ...

> SETTING UP X11-COMMON (1:7.3+20) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXFIXES3.

> (READING DATABASE ... 6230 FILES AND DIRECTORIES CURRENTLY INSTALLED.)

> UNPACKING LIBXFIXES3 (FROM .../LIBXFIXES3_1%3A4.0.3-2_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBICE6.

> UNPACKING LIBICE6 (FROM .../LIBICE6_2%3A1.0.4-1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBSM6.

> UNPACKING LIBSM6 (FROM .../LIBSM6_2%3A1.0.3-2_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXT6.

> UNPACKING LIBXT6 (FROM .../LIBXT6_1%3A1.0.5-3_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBPNG12-0.

> UNPACKING LIBPNG12-0 (FROM .../LIBPNG12-0_1.2.27-2+LENNY4_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXEXT6.

> UNPACKING LIBXEXT6 (FROM .../LIBXEXT6_2%3A1.0.4-2_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXMU6.

> UNPACKING LIBXMU6 (FROM .../LIBXMU6_2%3A1.0.4-1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXPM4.

> UNPACKING LIBXPM4 (FROM .../LIBXPM4_1%3A3.5.7-1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXAW7.

> UNPACKING LIBXAW7 (FROM .../LIBXAW7_2%3A1.0.4-2_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXRENDER1.

> UNPACKING LIBXRENDER1 (FROM .../LIBXRENDER1_1%3A0.9.4-2_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXCURSOR1.

> UNPACKING LIBXCURSOR1 (FROM .../LIBXCURSOR1_1%3A1.1.9-1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBEXPAT1.

> UNPACKING LIBEXPAT1 (FROM .../LIBEXPAT1_2.0.1-4+LENNY3_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBFREETYPE6.

> UNPACKING LIBFREETYPE6 (FROM .../LIBFREETYPE6_2.3.7-2+LENNY4_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE UCF.

> UNPACKING UCF (FROM .../ARCHIVES/UCF_3.0016_ALL.DEB) ...

> MOVING OLD DATA OUT OF THE WAY

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBMAGIC1.

> UNPACKING LIBMAGIC1 (FROM .../LIBMAGIC1_4.26-1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE FILE.

> UNPACKING FILE (FROM .../ARCHIVES/FILE_4.26-1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE PERL-MODULES.

> UNPACKING PERL-MODULES (FROM .../PERL-MODULES_5.10.0-19LENNY2_ALL.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBGDBM3.

> UNPACKING LIBGDBM3 (FROM .../LIBGDBM3_1.8.3-3_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE PERL.

> UNPACKING PERL (FROM .../PERL_5.10.0-19LENNY2_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBNEWT0.52.

> UNPACKING LIBNEWT0.52 (FROM .../LIBNEWT0.52_0.52.2-11.3+LENNY1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBPOPT0.

> UNPACKING LIBPOPT0 (FROM .../LIBPOPT0_1.14-4_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE WHIPTAIL.

> UNPACKING WHIPTAIL (FROM .../WHIPTAIL_0.52.2-11.3+LENNY1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE DEFOMA.

> UNPACKING DEFOMA (FROM .../DEFOMA_0.11.10-0.2_ALL.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE TTF-DEJAVU-CORE.

> UNPACKING TTF-DEJAVU-CORE (FROM .../TTF-DEJAVU-CORE_2.25-3_ALL.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE TTF-DEJAVU-EXTRA.

> UNPACKING TTF-DEJAVU-EXTRA (FROM .../TTF-DEJAVU-EXTRA_2.25-3_ALL.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE TTF-DEJAVU.

> UNPACKING TTF-DEJAVU (FROM .../TTF-DEJAVU_2.25-3_ALL.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE FONTCONFIG-CONFIG.

> UNPACKING FONTCONFIG-CONFIG (FROM .../FONTCONFIG-CONFIG_2.6.0-3_ALL.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBFONTCONFIG1.

> UNPACKING LIBFONTCONFIG1 (FROM .../LIBFONTCONFIG1_2.6.0-3_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXFT2.

> UNPACKING LIBXFT2 (FROM .../LIBXFT2_2.1.12-3_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXKBFILE1.

> UNPACKING LIBXKBFILE1 (FROM .../LIBXKBFILE1_1%3A1.0.5-1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXMUU1.

> UNPACKING LIBXMUU1 (FROM .../LIBXMUU1_2%3A1.0.4-1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBGMP3C2.

> UNPACKING LIBGMP3C2 (FROM .../LIBGMP3C2_2%3A4.2.2+DFSG-3_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBMPFR1LDBL.

> UNPACKING LIBMPFR1LDBL (FROM .../LIBMPFR1LDBL_2.3.1.DFSG.1-2_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE CPP-4.3.

> UNPACKING CPP-4.3 (FROM .../CPP-4.3_4.3.2-1.1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE CPP.

> UNPACKING CPP (FROM .../CPP_4%3A4.3.2-2_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE X11-APPS.

> UNPACKING X11-APPS (FROM .../X11-APPS_7.3+4_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE X11-SESSION-UTILS.

> UNPACKING X11-SESSION-UTILS (FROM .../X11-SESSION-UTILS_7.3+1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBFONTENC1.

> UNPACKING LIBFONTENC1 (FROM .../LIBFONTENC1_1%3A1.0.4-3_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBDRM2.

> UNPACKING LIBDRM2 (FROM .../LIBDRM2_2.3.1-2_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXDAMAGE1.

> UNPACKING LIBXDAMAGE1 (FROM .../LIBXDAMAGE1_1%3A1.1.1-4_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXXF86VM1.

> UNPACKING LIBXXF86VM1 (FROM .../LIBXXF86VM1_1%3A1.0.2-1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBGL1-MESA-GLX.

> UNPACKING LIBGL1-MESA-GLX (FROM .../LIBGL1-MESA-GLX_7.0.3-7_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXI6.

> UNPACKING LIBXI6 (FROM .../LIBXI6_2%3A1.1.4-1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXINERAMA1.

> UNPACKING LIBXINERAMA1 (FROM .../LIBXINERAMA1_2%3A1.0.3-2_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXTST6.

> UNPACKING LIBXTST6 (FROM .../LIBXTST6_2%3A1.0.3-1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXV1.

> UNPACKING LIBXV1 (FROM .../LIBXV1_2%3A1.0.4-1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXXF86DGA1.

> UNPACKING LIBXXF86DGA1 (FROM .../LIBXXF86DGA1_2%3A1.0.2-1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE X11-UTILS.

> UNPACKING X11-UTILS (FROM .../X11-UTILS_7.3+2+NMU1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBFS6.

> UNPACKING LIBFS6 (FROM .../LIBFS6_2%3A1.0.1-1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE X11-XFS-UTILS.

> UNPACKING X11-XFS-UTILS (FROM .../X11-XFS-UTILS_7.3+1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXRANDR2.

> UNPACKING LIBXRANDR2 (FROM .../LIBXRANDR2_2%3A1.2.3-1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXTRAP6.

> UNPACKING LIBXTRAP6 (FROM .../LIBXTRAP6_2%3A1.0.0-5_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXXF86MISC1.

> UNPACKING LIBXXF86MISC1 (FROM .../LIBXXF86MISC1_1%3A1.0.1-3_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE X11-XSERVER-UTILS.

> UNPACKING X11-XSERVER-UTILS (FROM .../X11-XSERVER-UTILS_7.3+5_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE XUTILS-DEV.

> UNPACKING XUTILS-DEV (FROM .../XUTILS-DEV_1%3A7.4+3_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE NET-TOOLS.

> UNPACKING NET-TOOLS (FROM .../NET-TOOLS_1.60-22_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE IFUPDOWN.

> UNPACKING IFUPDOWN (FROM .../IFUPDOWN_0.6.8+NMU1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE NETBASE.

> UNPACKING NETBASE (FROM .../ARCHIVES/NETBASE_4.34_ALL.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBFRIBIDI0.

> UNPACKING LIBFRIBIDI0 (FROM .../LIBFRIBIDI0_0.10.9-1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBGIF4.

> UNPACKING LIBGIF4 (FROM .../LIBGIF4_4.1.6-6_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBJPEG62.

> UNPACKING LIBJPEG62 (FROM .../LIBJPEG62_6B-14_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBTIFF4.

> UNPACKING LIBTIFF4 (FROM .../LIBTIFF4_3.8.2-11.3_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBWRASTER3.

> UNPACKING LIBWRASTER3 (FROM .../LIBWRASTER3_0.92.0-8_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE LIBXFONT1.

> UNPACKING LIBXFONT1 (FROM .../LIBXFONT1_1%3A1.3.3-1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE PSMISC.

> UNPACKING PSMISC (FROM .../PSMISC_22.6-1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE XFONTS-ENCODINGS.

> UNPACKING XFONTS-ENCODINGS (FROM .../XFONTS-ENCODINGS_1%3A1.0.2-3_ALL.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE XFONTS-UTILS.

> UNPACKING XFONTS-UTILS (FROM .../XFONTS-UTILS_1%3A7.4+1_AMD64.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE XUTILS.

> UNPACKING XUTILS (FROM .../XUTILS_1%3A7.3+20_ALL.DEB) ...

> SELECTING PREVIOUSLY DESELECTED PACKAGE WDM.

> UNPACKING WDM (FROM .../ARCHIVES/WDM_1.28-3_AMD64.DEB) ...

> SETTING UP LIBXAU6 (1:1.0.3-3) ...

> SETTING UP LIBXDMCP6 (1:1.0.2-3) ...

> SETTING UP LIBXCB1 (1.1-1.2) ...

> SETTING UP LIBXCB-XLIB0 (1.1-1.2) ...

> SETTING UP LIBX11-DATA (2:1.1.5-2) ...

> SETTING UP LIBX11-6 (2:1.1.5-2) ...

> SETTING UP LIBXFIXES3 (1:4.0.3-2) ...

> SETTING UP LIBICE6 (2:1.0.4-1) ...

> SETTING UP LIBSM6 (2:1.0.3-2) ...

> SETTING UP LIBXT6 (1:1.0.5-3) ...

> SETTING UP LIBPNG12-0 (1.2.27-2+LENNY4) ...

> SETTING UP LIBXEXT6 (2:1.0.4-2) ...

> SETTING UP LIBXMU6 (2:1.0.4-1) ...

> SETTING UP LIBXPM4 (1:3.5.7-1) ...

> SETTING UP LIBXAW7 (2:1.0.4-2) ...

> SETTING UP LIBXRENDER1 (1:0.9.4-2) ...

> SETTING UP LIBXCURSOR1 (1:1.1.9-1) ...

> SETTING UP LIBEXPAT1 (2.0.1-4+LENNY3) ...

> SETTING UP LIBFREETYPE6 (2.3.7-2+LENNY4) ...

> SETTING UP UCF (3.0016) ...

> SETTING UP LIBMAGIC1 (4.26-1) ...

> SETTING UP FILE (4.26-1) ...

> SETTING UP LIBGDBM3 (1.8.3-3) ...

> SETTING UP LIBNEWT0.52 (0.52.2-11.3+LENNY1) ...

> SETTING UP LIBPOPT0 (1.14-4) ...

> SETTING UP WHIPTAIL (0.52.2-11.3+LENNY1) ...

> SETTING UP LIBXKBFILE1 (1:1.0.5-1) ...

> SETTING UP LIBXMUU1 (2:1.0.4-1) ...

> SETTING UP LIBGMP3C2 (2:4.2.2+DFSG-3) ...

> SETTING UP LIBMPFR1LDBL (2.3.1.DFSG.1-2) ...

> SETTING UP CPP-4.3 (4.3.2-1.1) ...

> SETTING UP CPP (4:4.3.2-2) ...

> SETTING UP X11-SESSION-UTILS (7.3+1) ...

> SETTING UP LIBFONTENC1 (1:1.0.4-3) ...

> SETTING UP LIBDRM2 (2.3.1-2) ...

> SETTING UP LIBXDAMAGE1 (1:1.1.1-4) ...

> SETTING UP LIBXXF86VM1 (1:1.0.2-1) ...

> SETTING UP LIBGL1-MESA-GLX (7.0.3-7) ...

> SETTING UP LIBXI6 (2:1.1.4-1) ...

> SETTING UP LIBXINERAMA1 (2:1.0.3-2) ...

> SETTING UP LIBXTST6 (2:1.0.3-1) ...

> SETTING UP LIBXV1 (2:1.0.4-1) ...

> SETTING UP LIBXXF86DGA1 (2:1.0.2-1) ...

> SETTING UP LIBFS6 (2:1.0.1-1) ...

> SETTING UP X11-XFS-UTILS (7.3+1) ...

> SETTING UP LIBXRANDR2 (2:1.2.3-1) ...

> SETTING UP LIBXTRAP6 (2:1.0.0-5) ...

> SETTING UP LIBXXF86MISC1 (1:1.0.1-3) ...

> SETTING UP X11-XSERVER-UTILS (7.3+5) ...

> SETTING UP XUTILS-DEV (1:7.4+3) ...

> SETTING UP NET-TOOLS (1.60-22) ...

> SETTING UP IFUPDOWN (0.6.8+NMU1) ...

> DF: WARNING: CANNOT READ TABLE OF MOUNTED FILE SYSTEMS: NO SUCH FILE OR DIRECTORY

> IFUPDOWN.POSTINST: WARNING: NO 'IFACE LO' DEFINITION FOUND IN /ETC/NETWORK/INTERFACES

> IFUPDOWN.POSTINST: WARNING: NO 'AUTO LO' STATEMENT FOUND IN /ETC/NETWORK/INTERFACES

> SETTING UP NETBASE (4.34) ...

> SETTING UP LIBFRIBIDI0 (0.10.9-1) ...

> SETTING UP LIBGIF4 (4.1.6-6) ...

> SETTING UP LIBJPEG62 (6B-14) ...

> SETTING UP LIBTIFF4 (3.8.2-11.3) ...

> SETTING UP LIBWRASTER3 (0.92.0-8) ...

> SETTING UP LIBXFONT1 (1:1.3.3-1) ...

> SETTING UP PSMISC (22.6-1) ...

> SETTING UP XFONTS-ENCODINGS (1:1.0.2-3) ...

> SETTING UP XFONTS-UTILS (1:7.4+1) ...

> SETTING UP PERL-MODULES (5.10.0-19LENNY2) ...

> SETTING UP PERL (5.10.0-19LENNY2) ...

> SETTING UP DEFOMA (0.11.10-0.2) ...

> SETTING UP TTF-DEJAVU-CORE (2.25-3) ...

> SETTING UP TTF-DEJAVU-EXTRA (2.25-3) ...

> SETTING UP TTF-DEJAVU (2.25-3) ...

> SETTING UP FONTCONFIG-CONFIG (2.6.0-3) ...

> SETTING UP LIBFONTCONFIG1 (2.6.0-3) ...

> SETTING UP LIBXFT2 (2.1.12-3) ...

> SETTING UP X11-APPS (7.3+4) ...

> SETTING UP X11-UTILS (7.3+2+NMU1) ...

> SETTING UP XUTILS (1:7.3+20) ...

> SETTING UP WDM (1.28-3) ...

> -- Upgrading distribution: FAILED
> ## Updating /etc/apt/sources.list...
> ## Running apt-get update...
> Get:1 http://localhost squeeze Release.gpg [835B]
> Get:2 http://localhost squeeze Release [89.9kB]
> Get:3 http://localhost squeeze/main Packages [8633kB]
> Fetched 8723kB in 1s (7035kB/s)
> Reading package lists...
> ## Running apt-get -y upgrade...
> Reading package lists...
> Building dependency tree...
> Reading state information...
> Entering ResolveByKeep
> Keeping package dpkg
> Keeping package debianutils
> Keeping package util-linux
> Keeping package sed
> Keeping package bash
> Keeping package e2fsprogs
> Keeping package findutils
> Keeping package grep
> Keeping package diff
> Keeping package libc6
> Keeping package libgcc1
> Package libgcc1 has broken dep on gcc-4.3-base
> Keeping Package gcc-4.3-base due to dep
> Keeping package libpam-modules
> Keeping package sysv-rc
> Keeping package libpam-runtime
> Keeping package libxcb1
> Keeping package libx11-6
> Keeping package libstdc++6
> Keeping package gnupg
> Keeping package cpp
> Keeping package gpgv
> Keeping package libgdbm3
> Keeping package libxi6
> Keeping package perl
> Package perl has broken dep on perl-base
> Keeping Package perl-base due to dep
> Keeping package liblocale-gettext-perl
> Keeping package perl-modules
> Keeping package readline-common
> Keeping package apt-utils
> Package apt-utils has broken dep on libapt-pkg-libc6.7-6-4.6
> Keeping Package apt due to dep
> Keeping package x11-utils
> Keeping package nvi
> Keeping package cpp-4.3
> The following packages have been kept back:
> apt apt-utils bash cpp cpp-4.3 debianutils diff dpkg e2fsprogs findutils
> gcc-4.3-base gnupg gpgv grep libc6 libgcc1 libgdbm3 liblocale-gettext-perl
> libpam-modules libpam-runtime libstdc++6 libx11-6 libxcb1 libxi6 nvi perl
> perl-base perl-modules readline-common sed sysv-rc util-linux x11-utils
> The following packages will be upgraded:
> base-files base-passwd bsdutils coreutils debconf debconf-i18n debfoster
> debian-archive-keyring defoma e2fslibs file fontconfig-config gzip hostname
> ifupdown initscripts less libacl1 libattr1 libblkid1 libbz2-1.0 libcomerr2
> libdb4.6 libdrm2 libexpat1 libfontconfig1 libfontenc1 libfreetype6
> libfribidi0 libfs6 libgc1c2 libgif4 libgl1-mesa-glx libgmp3c2 libice6
> libjpeg62 libmagic1 libncurses5 libncursesw5 libnewt0.52 libpam0g libpng12-0
> libpopt0 libreadline5 libselinux1 libsepol1 libslang2 libsm6 libss2
> libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libtiff4
> libusb-0.1-4 libuuid1 libwraster3 libx11-data libxau6 libxaw7 libxcursor1
> libxdamage1 libxdmcp6 libxext6 libxfixes3 libxfont1 libxft2 libxinerama1
> libxkbfile1 libxmu6 libxmuu1 libxpm4 libxrandr2 libxrender1 libxt6 libxtst6
> libxv1 libxxf86dga1 libxxf86vm1 login lsb-base mawk mktemp mount
> ncurses-base ncurses-bin net-tools netbase passwd psmisc sysvinit
> sysvinit-utils tar ttf-dejavu ttf-dejavu-core ttf-dejavu-extra tzdata ucf
> wdm whiptail x11-apps x11-common x11-session-utils x11-xfs-utils
> x11-xserver-utils xfonts-encodings xfonts-utils xutils xutils-dev zlib1g
> 109 upgraded, 0 newly installed, 0 to remove and 33 not upgraded.
> Need to get 26.5MB of archives.
> After this operation, 4628kB of additional disk space will be used.
> Get:1 http://localhost squeeze/main base-files 5.10 [68.6kB]
> Get:2 http://localhost squeeze/main coreutils 8.5-1 [5102kB]
> Get:3 http://localhost squeeze/main gzip 1.3.12-9 [108kB]
> Get:4 http://localhost squeeze/main hostname 3.04 [15.7kB]
> Get:5 http://localhost squeeze/main login 1:4.1.4.2+svn3283-2 [783kB]
> Get:6 http://localhost squeeze/main libtext-iconv-perl 1.7-2 [18.5kB]
> Get:7 http://localhost squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB]
> Get:8 http://localhost squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B]
> Get:9 http://localhost squeeze/main debconf-i18n 1.5.36 [208kB]
> Get:10 http://localhost squeeze/main debconf 1.5.36 [164kB]
> Get:11 http://localhost squeeze/main libpam0g 1.1.1-6.1 [118kB]
> Get:12 http://localhost squeeze/main libselinux1 2.0.96-1 [88.3kB]
> Get:13 http://localhost squeeze/main passwd 1:4.1.4.2+svn3283-2 [1113kB]
> Get:14 http://localhost squeeze/main libuuid1 2.17.2-3.3 [58.6kB]
> Get:15 http://localhost squeeze/main libblkid1 2.17.2-3.3 [108kB]
> Get:16 http://localhost squeeze/main mount 2.17.2-3.3 [177kB]
> Get:17 http://localhost squeeze/main libncurses5 5.7+20100313-4 [365kB]
> Get:18 http://localhost squeeze/main ncurses-bin 5.7+20100313-4 [320kB]
> Get:19 http://localhost squeeze/main sysvinit-utils 2.88dsf-13 [121kB]
> Get:20 http://localhost squeeze/main libsepol1 2.0.41-1 [132kB]
> Get:21 http://localhost squeeze/main sysvinit 2.88dsf-13 [119kB]
> Get:22 http://localhost squeeze/main tar 1.23-3 [931kB]
> Get:23 http://localhost squeeze/main mktemp 8.5-1 [14.8kB]
> Get:24 http://localhost squeeze/main base-passwd 3.5.22 [41.9kB]
> Get:25 http://localhost squeeze/main bsdutils 1:2.17.2-3.3 [79.5kB]
> Get:26 http://localhost squeeze/main ncurses-base 5.7+20100313-4 [187kB]
> Get:27 http://localhost squeeze/main mawk 1.3.3-15 [90.1kB]
> Get:28 http://localhost squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB]
> Get:29 http://localhost squeeze/main libpng12-0 1.2.44-1 [180kB]
> Get:30 http://localhost squeeze/main lsb-base 3.2-23.1 [20.5kB]
> Get:31 http://localhost squeeze/main x11-common 1:7.5+8 [274kB]
> Get:32 http://localhost squeeze/main libice6 2:1.0.6-2 [53.8kB]
> Get:33 http://localhost squeeze/main libsm6 2:1.1.1-1 [25.0kB]
> Get:34 http://localhost squeeze/main libxext6 2:1.1.2-1 [45.3kB]
> Get:35 http://localhost squeeze/main libxt6 1:1.0.7-1 [192kB]
> Get:36 http://localhost squeeze/main libxmu6 2:1.0.5-2 [58.4kB]
> Get:37 http://localhost squeeze/main libxpm4 1:3.5.8-1 [44.2kB]
> Get:38 http://localhost squeeze/main libxaw7 2:1.0.7-1 [211kB]
> Get:39 http://localhost squeeze/main libxfixes3 1:4.0.5-1 [19.1kB]
> Get:40 http://localhost squeeze/main libxrender1 1:0.9.6-1 [30.9kB]
> Get:41 http://localhost squeeze/main libxcursor1 1:1.1.10-2 [26.4kB]
> Get:42 http://localhost squeeze/main libexpat1 2.0.1-7 [137kB]
> Get:43 http://localhost squeeze/main libfreetype6 2.4.2-2.1 [378kB]
> Get:44 http://localhost squeeze/main ucf 3.0025+nmu1 [69.6kB]
> Get:45 http://localhost squeeze/main ttf-dejavu-core 2.31-1 [1451kB]
> Get:46 http://localhost squeeze/main libfontconfig1 2.8.0-2.1 [281kB]
> Get:47 http://localhost squeeze/main fontconfig-config 2.8.0-2.1 [217kB]
> Get:48 http://localhost squeeze/main libxft2 2.1.14-2 [55.7kB]
> Get:49 http://localhost squeeze/main libxkbfile1 1:1.0.6-2 [78.4kB]
> Get:50 http://localhost squeeze/main libxmuu1 2:1.0.5-2 [15.6kB]
> Get:51 http://localhost squeeze/main x11-apps 7.5+5 [731kB]
> Get:52 http://localhost squeeze/main x11-session-utils 7.5+1 [78.9kB]
> Get:53 http://localhost squeeze/main libfs6 2:1.0.2-1 [32.8kB]
> Get:54 http://localhost squeeze/main x11-xfs-utils 7.4+1 [27.5kB]
> Get:55 http://localhost squeeze/main debian-archive-keyring 2010.08.28 [19.9kB]
> Get:56 http://localhost squeeze/main libbz2-1.0 1.0.5-6 [46.4kB]
> Get:57 http://localhost squeeze/main libslang2 2.2.2-4 [546kB]
> Get:58 http://localhost squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB]
> Get:59 http://localhost squeeze/main e2fslibs 1.41.12-2 [144kB]
> Get:60 http://localhost squeeze/main initscripts 2.88dsf-13 [70.0kB]
> Get:61 http://localhost squeeze/main libattr1 1:2.4.44-2 [12.8kB]
> Get:62 http://localhost squeeze/main libacl1 2.2.49-4 [28.3kB]
> Get:63 http://localhost squeeze/main libcomerr2 1.41.12-2 [49.2kB]
> Get:64 http://localhost squeeze/main libss2 1.41.12-2 [54.3kB]
> Get:65 http://localhost squeeze/main tzdata 2010o-1 [764kB]
> Get:66 http://localhost squeeze/main libdb4.6 4.6.21-16 [600kB]
> Get:67 http://localhost squeeze/main libreadline5 5.2-7 [146kB]
> Get:68 http://localhost squeeze/main net-tools 1.60-23 [337kB]
> Get:69 http://localhost squeeze/main ifupdown 0.6.10 [49.4kB]
> Get:70 http://localhost squeeze/main libncursesw5 5.7+20100313-4 [389kB]
> Get:71 http://localhost squeeze/main libnewt0.52 0.52.11-1 [71.8kB]
> Get:72 http://localhost squeeze/main libpopt0 1.16-1 [54.1kB]
> Get:73 http://localhost squeeze/main netbase 4.43 [20.5kB]
> Get:74 http://localhost squeeze/main whiptail 0.52.11-1 [40.2kB]
> Get:75 http://localhost squeeze/main file 5.04-5 [49.7kB]
> Get:76 http://localhost squeeze/main libmagic1 5.04-5 [234kB]
> Get:77 http://localhost squeeze/main less 436-1 [127kB]
> Get:78 http://localhost squeeze/main libgc1c2 1:6.8-1.2 [126kB]
> Get:79 http://localhost squeeze/main debfoster 2.7-1.1 [38.2kB]
> Get:80 http://localhost squeeze/main defoma 0.11.11 [101kB]
> Get:81 http://localhost squeeze/main libdrm2 2.4.21-1~squeeze3 [418kB]
> Get:82 http://localhost squeeze/main libfontenc1 1:1.0.5-2 [20.5kB]
> Get:83 http://localhost squeeze/main libfribidi0 0.19.2-1 [43.5kB]
> Get:84 http://localhost squeeze/main libgif4 4.1.6-9 [41.7kB]
> Get:85 http://localhost squeeze/main libxdamage1 1:1.1.3-1 [14.1kB]
> Get:86 http://localhost squeeze/main libxxf86vm1 1:1.1.0-2 [15.5kB]
> Get:87 http://localhost squeeze/main libgl1-mesa-glx 7.7.1-4 [182kB]
> Get:88 http://localhost squeeze/main libgmp3c2 2:4.3.2+dfsg-1 [313kB]
> Get:89 http://localhost squeeze/main libjpeg62 6b1-1 [94.0kB]
> Get:90 http://localhost squeeze/main libtiff4 3.9.4-5 [194kB]
> Get:91 http://localhost squeeze/main libxinerama1 2:1.1-3 [12.5kB]
> Get:92 http://localhost squeeze/main libwraster3 0.92.0-8.2+b1 [114kB]
> Get:93 http://localhost squeeze/main libx11-data 2:1.3.3-4 [190kB]
> Get:94 http://localhost squeeze/main libxau6 1:1.0.6-1 [16.8kB]
> Get:95 http://localhost squeeze/main libxdmcp6 1:1.0.3-2 [19.3kB]
> Get:96 http://localhost squeeze/main libxfont1 1:1.4.1-2 [153kB]
> Get:97 http://localhost squeeze/main libxrandr2 2:1.3.0-3 [28.4kB]
> Get:98 http://localhost squeeze/main libxtst6 2:1.1.0-3 [19.8kB]
> Get:99 http://localhost squeeze/main libxv1 2:1.0.5-1 [18.0kB]
> Get:100 http://localhost squeeze/main libxxf86dga1 2:1.1.1-2 [19.1kB]
> Get:101 http://localhost squeeze/main psmisc 22.11-1 [119kB]
> Get:102 http://localhost squeeze/main ttf-dejavu-extra 2.31-1 [3199kB]
> Get:103 http://localhost squeeze/main ttf-dejavu 2.31-1 [29.3kB]
> Get:104 http://localhost squeeze/main x11-xserver-utils 7.5+2 [185kB]
> Get:105 http://localhost squeeze/main wdm 1.28-4 [444kB]
> Get:106 http://localhost squeeze/main xfonts-encodings 1:1.0.3-1 [584kB]
> Get:107 http://localhost squeeze/main xfonts-utils 1:7.5+2 [96.2kB]
> Get:108 http://localhost squeeze/main xutils 1:7.5+8 [38.1kB]
> Get:109 http://localhost squeeze/main xutils-dev 1:7.5+4 [344kB]
> Extracting templates from packages: 27%
Extracting templates from packages: 55%
Extracting templates from packages: 82%
Extracting templates from packages: 100%
> Preconfiguring packages ...
> Fetched 26.5MB in 1s (17.1MB/s)
> (Reading database ... 8767 files and directories currently installed.)
> Preparing to replace base-files 5lenny8 (using .../base-files_5.10_amd64.deb) ...
> Unpacking replacement base-files ...
> Replacing files in old package dpkg ...
> Setting up base-files (5.10) ...
> Installing new version of config file /etc/debian_version ...
> Installing new version of config file /etc/issue ...
> Installing new version of config file /etc/issue.net ...
> (Reading database ... 8769 files and directories currently installed.)
> Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ...
> Unpacking replacement coreutils ...
> Replacing files in old package mktemp ...
> Setting up coreutils (8.5-1) ...
> (Reading database ... 8793 files and directories currently installed.)
> Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9_amd64.deb) ...
> Unpacking replacement gzip ...
> Setting up gzip (1.3.12-9) ...
> (Reading database ... 8793 files and directories currently installed.)
> Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ...
> Unpacking replacement hostname ...
> Setting up hostname (3.04) ...
> (Reading database ... 8799 files and directories currently installed.)
> Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2_amd64.deb) ...
> Unpacking replacement login ...
> Setting up login (1:4.1.4.2+svn3283-2) ...
> Installing new version of config file /etc/securetty ...
> Installing new version of config file /etc/pam.d/login ...
> Installing new version of config file /etc/login.defs ...
> (Reading database ... 8798 files and directories currently installed.)
> Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ...
> Unpacking replacement libtext-iconv-perl ...
> Setting up libtext-iconv-perl (1.7-2) ...
> (Reading database ... 8799 files and directories currently installed.)
> Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ...
> Unpacking replacement libtext-charwidth-perl ...
> Setting up libtext-charwidth-perl (0.04-6) ...
> (Reading database ... 8799 files and directories currently installed.)
> Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ...
> Unpacking replacement libtext-wrapi18n-perl ...
> Setting up libtext-wrapi18n-perl (0.06-7) ...
> (Reading database ... 8799 files and directories currently installed.)
> Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36_all.deb) ...
> Unpacking replacement debconf-i18n ...
> Setting up debconf-i18n (1.5.36) ...
> (Reading database ... 8816 files and directories currently installed.)
> Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36_all.deb) ...
> Unpacking replacement debconf ...
> Setting up debconf (1.5.36) ...
> (Reading database ... 8820 files and directories currently installed.)
> Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1_amd64.deb) ...
> Unpacking replacement libpam0g ...
> Setting up libpam0g (1.1.1-6.1) ...
> Checking for services that may need to be restarted...Checking init scripts...
> 
> Restarting services possibly affected by the upgrade:
> wdm: stopping...starting...done.
> 
> Services restarted successfully.
> 
> (Reading database ... 8820 files and directories currently installed.)
> Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ...
> Unpacking replacement libselinux1 ...
> Setting up libselinux1 (2.0.96-1) ...
> (Reading database ... 8820 files and directories currently installed.)
> Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2_amd64.deb) ...
> Unpacking replacement passwd ...
> Setting up passwd (1:4.1.4.2+svn3283-2) ...
> (Reading database ... 8814 files and directories currently installed.)
> Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-3.3_amd64.deb) ...
> Unpacking replacement libuuid1 ...
> Setting up libuuid1 (2.17.2-3.3) ...
> (Reading database ... 8814 files and directories currently installed.)
> Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-3.3_amd64.deb) ...
> Unpacking replacement libblkid1 ...
> Setting up libblkid1 (2.17.2-3.3) ...
> (Reading database ... 8815 files and directories currently installed.)
> Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-3.3_amd64.deb) ...
> Unpacking replacement mount ...
> Setting up mount (2.17.2-3.3) ...
> (Reading database ... 8816 files and directories currently installed.)
> Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-4_amd64.deb) ...
> Unpacking replacement libncurses5 ...
> Setting up libncurses5 (5.7+20100313-4) ...
> (Reading database ... 8816 files and directories currently installed.)
> Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-4_amd64.deb) ...
> Unpacking replacement ncurses-bin ...
> Setting up ncurses-bin (5.7+20100313-4) ...
> (Reading database ... 8818 files and directories currently installed.)
> Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13_amd64.deb) ...
> Unpacking replacement sysvinit-utils ...
> Replacing files in old package sysvinit ...
> Setting up sysvinit-utils (2.88dsf-13) ...
> (Reading database ... 8822 files and directories currently installed.)
> Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ...
> Unpacking replacement libsepol1 ...
> Setting up libsepol1 (2.0.41-1) ...
> (Reading database ... 8822 files and directories currently installed.)
> Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13_amd64.deb) ...
> Unpacking replacement sysvinit ...
> Setting up sysvinit (2.88dsf-13) ...
> (Reading database ... 8823 files and directories currently installed.)
> Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ...
> Unpacking replacement tar ...
> Setting up tar (1.23-3) ...
> (Reading database ... 8823 files and directories currently installed.)
> Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ...
> Unpacking replacement mktemp ...
> Setting up mktemp (8.5-1) ...
> (Reading database ... 8823 files and directories currently installed.)
> Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ...
> Unpacking replacement base-passwd ...
> Setting up base-passwd (3.5.22) ...
> (Reading database ... 8823 files and directories currently installed.)
> Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-3.3_amd64.deb) ...
> Unpacking replacement bsdutils ...
> Setting up bsdutils (1:2.17.2-3.3) ...
> (Reading database ... 8824 files and directories currently installed.)
> Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-4_all.deb) ...
> Unpacking replacement ncurses-base ...
> Setting up ncurses-base (5.7+20100313-4) ...
> (Reading database ... 8774 files and directories currently installed.)
> Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ...
> Unpacking replacement mawk ...
> Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ...
> Unpacking replacement zlib1g ...
> Setting up zlib1g (1:1.2.3.4.dfsg-3) ...
> (Reading database ... 8774 files and directories currently installed.)
> Preparing to replace libpng12-0 1.2.27-2+lenny4 (using .../libpng12-0_1.2.44-1_amd64.deb) ...
> Unpacking replacement libpng12-0 ...
> Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.1_all.deb) ...
> Unpacking replacement lsb-base ...
> Setting up lsb-base (3.2-23.1) ...
> (Reading database ... 8774 files and directories currently installed.)
> Preparing to replace x11-common 1:7.3+20 (using .../x11-common_1%3a7.5+8_all.deb) ...
> Unpacking replacement x11-common ...
> Preparing to replace libice6 2:1.0.4-1 (using .../libice6_2%3a1.0.6-2_amd64.deb) ...
> Unpacking replacement libice6 ...
> Preparing to replace libsm6 2:1.0.3-2 (using .../libsm6_2%3a1.1.1-1_amd64.deb) ...
> Unpacking replacement libsm6 ...
> Preparing to replace libxext6 2:1.0.4-2 (using .../libxext6_2%3a1.1.2-1_amd64.deb) ...
> Unpacking replacement libxext6 ...
> Preparing to replace libxt6 1:1.0.5-3 (using .../libxt6_1%3a1.0.7-1_amd64.deb) ...
> Unpacking replacement libxt6 ...
> Preparing to replace libxmu6 2:1.0.4-1 (using .../libxmu6_2%3a1.0.5-2_amd64.deb) ...
> Unpacking replacement libxmu6 ...
> Preparing to replace libxpm4 1:3.5.7-1 (using .../libxpm4_1%3a3.5.8-1_amd64.deb) ...
> Unpacking replacement libxpm4 ...
> Preparing to replace libxaw7 2:1.0.4-2 (using .../libxaw7_2%3a1.0.7-1_amd64.deb) ...
> Unpacking replacement libxaw7 ...
> Preparing to replace libxfixes3 1:4.0.3-2 (using .../libxfixes3_1%3a4.0.5-1_amd64.deb) ...
> Unpacking replacement libxfixes3 ...
> Preparing to replace libxrender1 1:0.9.4-2 (using .../libxrender1_1%3a0.9.6-1_amd64.deb) ...
> Unpacking replacement libxrender1 ...
> Preparing to replace libxcursor1 1:1.1.9-1 (using .../libxcursor1_1%3a1.1.10-2_amd64.deb) ...
> Unpacking replacement libxcursor1 ...
> Preparing to replace libexpat1 2.0.1-4+lenny3 (using .../libexpat1_2.0.1-7_amd64.deb) ...
> Unpacking replacement libexpat1 ...
> Preparing to replace libfreetype6 2.3.7-2+lenny4 (using .../libfreetype6_2.4.2-2.1_amd64.deb) ...
> Unpacking replacement libfreetype6 ...
> Preparing to replace ucf 3.0016 (using .../ucf_3.0025+nmu1_all.deb) ...
> Unpacking replacement ucf ...
> Preparing to replace ttf-dejavu-core 2.25-3 (using .../ttf-dejavu-core_2.31-1_all.deb) ...
> Removing obsolete conffile /etc/defoma/hints/ttf-dejavu-core.hints ...
> Unpacking replacement ttf-dejavu-core ...
> Preparing to replace libfontconfig1 2.6.0-3 (using .../libfontconfig1_2.8.0-2.1_amd64.deb) ...
> Unpacking replacement libfontconfig1 ...
> Preparing to replace fontconfig-config 2.6.0-3 (using .../fontconfig-config_2.8.0-2.1_all.deb) ...
> Unpacking replacement fontconfig-config ...
> Preparing to replace libxft2 2.1.12-3 (using .../libxft2_2.1.14-2_amd64.deb) ...
> Unpacking replacement libxft2 ...
> Preparing to replace libxkbfile1 1:1.0.5-1 (using .../libxkbfile1_1%3a1.0.6-2_amd64.deb) ...
> Unpacking replacement libxkbfile1 ...
> Preparing to replace libxmuu1 2:1.0.4-1 (using .../libxmuu1_2%3a1.0.5-2_amd64.deb) ...
> Unpacking replacement libxmuu1 ...
> Setting up x11-common (1:7.5+8) ...
> Installing new version of config file /etc/X11/Xsession.d/20x11-common_process-args ...
> Installing new version of config file /etc/X11/Xsession.d/90x11-common_ssh-agent ...
> Installing new version of config file /etc/X11/Xsession.d/30x11-common_xresources ...
> Installing new version of config file /etc/X11/Xsession.d/50x11-common_determine-startup ...
> Installing new version of config file /etc/init.d/x11-common ...
> (Reading database ... 8778 files and directories currently installed.)
> Preparing to replace x11-apps 7.3+4 (using .../x11-apps_7.5+5_amd64.deb) ...
> Unpacking replacement x11-apps ...
> Preparing to replace x11-session-utils 7.3+1 (using .../x11-session-utils_7.5+1_amd64.deb) ...
> Unpacking replacement x11-session-utils ...
> Preparing to replace libfs6 2:1.0.1-1 (using .../libfs6_2%3a1.0.2-1_amd64.deb) ...
> Unpacking replacement libfs6 ...
> Preparing to replace x11-xfs-utils 7.3+1 (using .../x11-xfs-utils_7.4+1_amd64.deb) ...
> Unpacking replacement x11-xfs-utils ...
> Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28_all.deb) ...
> Unpacking replacement debian-archive-keyring ...
> Setting up debian-archive-keyring (2010.08.28) ...
> gpg: key F42584E6: "Lenny Stable Release Key <debian-release@lists.debian.org>" not changed
> gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) <ftpmaster@debian.org>" not changed
> gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed
> gpg: key B98321F9: "Squeeze Stable Release Key <debian-release@lists.debian.org>" not changed
> gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) <ftpmaster@debian.org>" not changed
> gpg: Total number processed: 5
> gpg:              unchanged: 5
> (Reading database ... 8812 files and directories currently installed.)
> Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6_amd64.deb) ...
> Unpacking replacement libbz2-1.0 ...
> Setting up libbz2-1.0 (1.0.5-6) ...
> (Reading database ... 8812 files and directories currently installed.)
> Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ...
> Unpacking replacement libslang2 ...
> Setting up libslang2 (2.2.2-4) ...
> (Reading database ... 8812 files and directories currently installed.)
> Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ...
> Unpacking replacement libusb-0.1-4 ...
> Setting up libusb-0.1-4 (2:0.1.12-16) ...
> (Reading database ... 8812 files and directories currently installed.)
> Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-2_amd64.deb) ...
> Unpacking replacement e2fslibs ...
> Setting up e2fslibs (1.41.12-2) ...
> (Reading database ... 8812 files and directories currently installed.)
> Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13_amd64.deb) ...
> Unpacking replacement initscripts ...
> Setting up initscripts (2.88dsf-13) ...
> Installing new version of config file /etc/init.d/bootlogd ...
> Installing new version of config file /etc/init.d/stop-bootlogd ...
> Installing new version of config file /etc/init.d/stop-bootlogd-single ...
> Installing new version of config file /etc/init.d/bootmisc.sh ...
> Installing new version of config file /etc/init.d/checkfs.sh ...
> Installing new version of config file /etc/init.d/checkroot.sh ...
> Installing new version of config file /etc/init.d/hostname.sh ...
> Installing new version of config file /etc/init.d/killprocs ...
> Installing new version of config file /etc/init.d/mountall.sh ...
> Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ...
> Installing new version of config file /etc/init.d/mountoverflowtmp ...
> Installing new version of config file /etc/init.d/mountdevsubfs.sh ...
> Installing new version of config file /etc/init.d/mountkernfs.sh ...
> Installing new version of config file /etc/init.d/mtab.sh ...
> Installing new version of config file /etc/init.d/rc.local ...
> Installing new version of config file /etc/init.d/rmnologin ...
> Installing new version of config file /etc/init.d/sendsigs ...
> Installing new version of config file /etc/init.d/umountfs ...
> Installing new version of config file /etc/init.d/umountnfs.sh ...
> Installing new version of config file /etc/init.d/urandom ...
> Installing new version of config file /etc/network/if-up.d/mountnfs ...
> (Reading database ... 8815 files and directories currently installed.)
> Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ...
> Unpacking replacement libattr1 ...
> Setting up libattr1 (1:2.4.44-2) ...
> (Reading database ... 8815 files and directories currently installed.)
> Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ...
> Unpacking replacement libacl1 ...
> Setting up libacl1 (2.2.49-4) ...
> (Reading database ... 8816 files and directories currently installed.)
> Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-2_amd64.deb) ...
> Unpacking replacement libcomerr2 ...
> Setting up libcomerr2 (1.41.12-2) ...
> (Reading database ... 8816 files and directories currently installed.)
> Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-2_amd64.deb) ...
> Unpacking replacement libss2 ...
> Setting up libss2 (1.41.12-2) ...
> (Reading database ... 8816 files and directories currently installed.)
> Preparing to replace tzdata 2010o-0lenny1 (using .../tzdata_2010o-1_all.deb) ...
> Unpacking replacement tzdata ...
> Setting up tzdata (2010o-1) ...
> 
> Current default time zone: 'Etc/UTC'
> Local time is now:      Sat Dec 11 14:33:13 UTC 2010.
> Universal Time is now:  Sat Dec 11 14:33:13 UTC 2010.
> Run 'dpkg-reconfigure tzdata' if you wish to change it.
> 
> (Reading database ... 8819 files and directories currently installed.)
> Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ...
> Unpacking replacement libdb4.6 ...
> Setting up libdb4.6 (4.6.21-16) ...
> (Reading database ... 8819 files and directories currently installed.)
> Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ...
> Unpacking replacement libreadline5 ...
> Setting up libreadline5 (5.2-7) ...
> (Reading database ... 8819 files and directories currently installed.)
> Preparing to replace net-tools 1.60-22 (using .../net-tools_1.60-23_amd64.deb) ...
> Unpacking replacement net-tools ...
> Preparing to replace ifupdown 0.6.8+nmu1 (using .../ifupdown_0.6.10_amd64.deb) ...
> Unpacking replacement ifupdown ...
> Preparing to replace libncursesw5 5.7+20081213-1 (using .../libncursesw5_5.7+20100313-4_amd64.deb) ...
> Unpacking replacement libncursesw5 ...
> Preparing to replace libnewt0.52 0.52.2-11.3+lenny1 (using .../libnewt0.52_0.52.11-1_amd64.deb) ...
> Unpacking replacement libnewt0.52 ...
> Preparing to replace libpopt0 1.14-4 (using .../libpopt0_1.16-1_amd64.deb) ...
> Unpacking replacement libpopt0 ...
> Preparing to replace netbase 4.34 (using .../archives/netbase_4.43_all.deb) ...
> Unpacking replacement netbase ...
> Preparing to replace whiptail 0.52.2-11.3+lenny1 (using .../whiptail_0.52.11-1_amd64.deb) ...
> Unpacking replacement whiptail ...
> Preparing to replace file 4.26-1 (using .../archives/file_5.04-5_amd64.deb) ...
> Unpacking replacement file ...
> Preparing to replace libmagic1 4.26-1 (using .../libmagic1_5.04-5_amd64.deb) ...
> Unpacking replacement libmagic1 ...
> Preparing to replace less 418-1 (using .../archives/less_436-1_amd64.deb) ...
> Unpacking replacement less ...
> Preparing to replace libgc1c2 1:6.8-1.1 (using .../libgc1c2_1%3a6.8-1.2_amd64.deb) ...
> Unpacking replacement libgc1c2 ...
> Preparing to replace debfoster 2.7-1 (using .../debfoster_2.7-1.1_amd64.deb) ...
> Unpacking replacement debfoster ...
> Preparing to replace defoma 0.11.10-0.2 (using .../defoma_0.11.11_all.deb) ...
> Unpacking replacement defoma ...
> Preparing to replace libdrm2 2.3.1-2 (using .../libdrm2_2.4.21-1~squeeze3_amd64.deb) ...
> Unpacking replacement libdrm2 ...
> Preparing to replace libfontenc1 1:1.0.4-3 (using .../libfontenc1_1%3a1.0.5-2_amd64.deb) ...
> Unpacking replacement libfontenc1 ...
> Preparing to replace libfribidi0 0.10.9-1 (using .../libfribidi0_0.19.2-1_amd64.deb) ...
> Unpacking replacement libfribidi0 ...
> Preparing to replace libgif4 4.1.6-6 (using .../libgif4_4.1.6-9_amd64.deb) ...
> Unpacking replacement libgif4 ...
> Preparing to replace libxdamage1 1:1.1.1-4 (using .../libxdamage1_1%3a1.1.3-1_amd64.deb) ...
> Unpacking replacement libxdamage1 ...
> Preparing to replace libxxf86vm1 1:1.0.2-1 (using .../libxxf86vm1_1%3a1.1.0-2_amd64.deb) ...
> Unpacking replacement libxxf86vm1 ...
> Preparing to replace libgl1-mesa-glx 7.0.3-7 (using .../libgl1-mesa-glx_7.7.1-4_amd64.deb) ...
> Unpacking replacement libgl1-mesa-glx ...
> Preparing to replace libgmp3c2 2:4.2.2+dfsg-3 (using .../libgmp3c2_2%3a4.3.2+dfsg-1_amd64.deb) ...
> Unpacking replacement libgmp3c2 ...
> Preparing to replace libjpeg62 6b-14 (using .../libjpeg62_6b1-1_amd64.deb) ...
> Unpacking replacement libjpeg62 ...
> Preparing to replace libtiff4 3.8.2-11.3 (using .../libtiff4_3.9.4-5_amd64.deb) ...
> Unpacking replacement libtiff4 ...
> Preparing to replace libxinerama1 2:1.0.3-2 (using .../libxinerama1_2%3a1.1-3_amd64.deb) ...
> Unpacking replacement libxinerama1 ...
> Preparing to replace libwraster3 0.92.0-8 (using .../libwraster3_0.92.0-8.2+b1_amd64.deb) ...
> Unpacking replacement libwraster3 ...
> Preparing to replace libx11-data 2:1.1.5-2 (using .../libx11-data_2%3a1.3.3-4_all.deb) ...
> Unpacking replacement libx11-data ...
> Preparing to replace libxau6 1:1.0.3-3 (using .../libxau6_1%3a1.0.6-1_amd64.deb) ...
> Unpacking replacement libxau6 ...
> Preparing to replace libxdmcp6 1:1.0.2-3 (using .../libxdmcp6_1%3a1.0.3-2_amd64.deb) ...
> Unpacking replacement libxdmcp6 ...
> Preparing to replace libxfont1 1:1.3.3-1 (using .../libxfont1_1%3a1.4.1-2_amd64.deb) ...
> Unpacking replacement libxfont1 ...
> Preparing to replace libxrandr2 2:1.2.3-1 (using .../libxrandr2_2%3a1.3.0-3_amd64.deb) ...
> Unpacking replacement libxrandr2 ...
> Preparing to replace libxtst6 2:1.0.3-1 (using .../libxtst6_2%3a1.1.0-3_amd64.deb) ...
> Unpacking replacement libxtst6 ...
> Preparing to replace libxv1 2:1.0.4-1 (using .../libxv1_2%3a1.0.5-1_amd64.deb) ...
> Unpacking replacement libxv1 ...
> Preparing to replace libxxf86dga1 2:1.0.2-1 (using .../libxxf86dga1_2%3a1.1.1-2_amd64.deb) ...
> Unpacking replacement libxxf86dga1 ...
> Preparing to replace psmisc 22.6-1 (using .../psmisc_22.11-1_amd64.deb) ...
> Unpacking replacement psmisc ...
> Preparing to replace ttf-dejavu-extra 2.25-3 (using .../ttf-dejavu-extra_2.31-1_all.deb) ...
> Removing obsolete conffile /etc/defoma/hints/ttf-dejavu-extra.hints ...
> Unpacking replacement ttf-dejavu-extra ...
> Preparing to replace ttf-dejavu 2.25-3 (using .../ttf-dejavu_2.31-1_all.deb) ...
> Unpacking replacement ttf-dejavu ...
> Preparing to replace x11-xserver-utils 7.3+5 (using .../x11-xserver-utils_7.5+2_amd64.deb) ...
> Unpacking replacement x11-xserver-utils ...
> Preparing to replace wdm 1.28-3 (using .../archives/wdm_1.28-4_amd64.deb) ...
> Unpacking replacement wdm ...
> Preparing to replace xfonts-encodings 1:1.0.2-3 (using .../xfonts-encodings_1%3a1.0.3-1_all.deb) ...
> Unpacking replacement xfonts-encodings ...
> Preparing to replace xfonts-utils 1:7.4+1 (using .../xfonts-utils_1%3a7.5+2_amd64.deb) ...
> Unpacking replacement xfonts-utils ...
> Preparing to replace xutils 1:7.3+20 (using .../xutils_1%3a7.5+8_all.deb) ...
> Unpacking replacement xutils ...
> Preparing to replace xutils-dev 1:7.4+3 (using .../xutils-dev_1%3a7.5+4_amd64.deb) ...
> Unpacking replacement xutils-dev ...
> Setting up mawk (1.3.3-15) ...
> Setting up libpng12-0 (1.2.44-1) ...
> Setting up libice6 (2:1.0.6-2) ...
> Setting up libsm6 (2:1.1.1-1) ...
> Setting up libxext6 (2:1.1.2-1) ...
> Setting up libxt6 (1:1.0.7-1) ...
> Setting up libxmu6 (2:1.0.5-2) ...
> Setting up libxpm4 (1:3.5.8-1) ...
> Setting up libxaw7 (2:1.0.7-1) ...
> Setting up libxfixes3 (1:4.0.5-1) ...
> Setting up libxrender1 (1:0.9.6-1) ...
> Setting up libxcursor1 (1:1.1.10-2) ...
> Setting up libexpat1 (2.0.1-7) ...
> Setting up libfreetype6 (2.4.2-2.1) ...
> Setting up ucf (3.0025+nmu1) ...
> Setting up ttf-dejavu-core (2.31-1) ...
> Setting up fontconfig-config (2.8.0-2.1) ...
> Installing new version of config file /etc/fonts/conf.avail/45-latin.conf ...
> Installing new version of config file /etc/fonts/conf.avail/60-latin.conf ...
> Installing new version of config file /etc/fonts/conf.avail/30-urw-aliases.conf ...
> Installing new version of config file /etc/fonts/conf.avail/90-synthetic.conf ...
> Installing new version of config file /etc/fonts/conf.avail/65-nonlatin.conf ...
> Installing new version of config file /etc/fonts/conf.avail/25-unhint-nonlatin.conf ...
> Installing new version of config file /etc/fonts/conf.avail/65-fonts-persian.conf ...
> Installing new version of config file /etc/fonts/conf.avail/50-user.conf ...
> Installing new version of config file /etc/fonts/conf.avail/30-metric-aliases.conf ...
> Setting up libfontconfig1 (2.8.0-2.1) ...
> Setting up libxft2 (2.1.14-2) ...
> Setting up libxkbfile1 (1:1.0.6-2) ...
> Setting up libxmuu1 (2:1.0.5-2) ...
> Setting up x11-apps (7.5+5) ...
> Installing new version of config file /etc/X11/app-defaults/Bitmap ...
> Installing new version of config file /etc/X11/app-defaults/Bitmap-color ...
> Installing new version of config file /etc/X11/app-defaults/Bitmap-nocase ...
> Setting up x11-session-utils (7.5+1) ...
> Setting up libfs6 (2:1.0.2-1) ...
> Setting up x11-xfs-utils (7.4+1) ...
> Setting up net-tools (1.60-23) ...
> Setting up ifupdown (0.6.10) ...
> Installing new version of config file /etc/init.d/ifupdown-clean ...
> ifupdown.postinst: Warning: No 'iface lo' definition found in /etc/network/interfaces
> ifupdown.postinst: Warning: No 'auto lo' statement found in /etc/network/interfaces
> Setting up libncursesw5 (5.7+20100313-4) ...
> Setting up libnewt0.52 (0.52.11-1) ...
> Setting up libpopt0 (1.16-1) ...
> Setting up netbase (4.43) ...
> Installing new version of config file /etc/services ...
> Installing new version of config file /etc/protocols ...
> Installing new version of config file /etc/init.d/networking ...
> Setting up whiptail (0.52.11-1) ...
> Setting up libmagic1 (5.04-5) ...
> Setting up file (5.04-5) ...
> Setting up less (436-1) ...
> Setting up libgc1c2 (1:6.8-1.2) ...
> Setting up debfoster (2.7-1.1) ...
> Setting up defoma (0.11.11) ...
> Setting up libdrm2 (2.4.21-1~squeeze3) ...
> Setting up libfontenc1 (1:1.0.5-2) ...
> Setting up libfribidi0 (0.19.2-1) ...
> Setting up libgif4 (4.1.6-9) ...
> Setting up libxdamage1 (1:1.1.3-1) ...
> Setting up libxxf86vm1 (1:1.1.0-2) ...
> Setting up libgl1-mesa-glx (7.7.1-4) ...
> Setting up libgmp3c2 (2:4.3.2+dfsg-1) ...
> Setting up libjpeg62 (6b1-1) ...
> Setting up libtiff4 (3.9.4-5) ...
> Setting up libxinerama1 (2:1.1-3) ...
> Setting up libwraster3 (0.92.0-8.2+b1) ...
> Setting up libx11-data (2:1.3.3-4) ...
> Setting up libxau6 (1:1.0.6-1) ...
> Setting up libxdmcp6 (1:1.0.3-2) ...
> Setting up libxfont1 (1:1.4.1-2) ...
> Setting up libxrandr2 (2:1.3.0-3) ...
> Setting up libxtst6 (2:1.1.0-3) ...
> Setting up libxv1 (2:1.0.5-1) ...
> Setting up libxxf86dga1 (2:1.1.1-2) ...
> Setting up psmisc (22.11-1) ...
> Setting up ttf-dejavu-extra (2.31-1) ...
> Setting up ttf-dejavu (2.31-1) ...
> Setting up x11-xserver-utils (7.5+2) ...
> Installing new version of config file /etc/X11/app-defaults/Xvidtune ...
> Setting up wdm (1.28-4) ...
> Installing new version of config file /etc/init.d/wdm ...
> 
> Configuration file `/etc/X11/wdm/wdm-config'
> ==> Modified (by you or by a script) since installation.
> ==> Package distributor has shipped an updated version.
> What would you like to do about it ?  Your options are:
> Y or I  : install the package maintainer's version
> N or O  : keep your currently-installed version
> D     : show the differences between the versions
> Z     : background this process to examine the situation
> The default action is to keep your current version.
> *** wdm-config (Y/I/N/O/D/Z) [default=N] ? dpkg: error processing wdm (--configure):
> EOF on stdin at conffile prompt
> Setting up xfonts-encodings (1:1.0.3-1) ...
> Setting up xfonts-utils (1:7.5+2) ...
> Setting up xutils (1:7.5+8) ...
> Setting up xutils-dev (1:7.5+4) ...
> Errors were encountered while processing:
> wdm
> E: Sub-process /usr/bin/dpkg returned an error code (1)
> ## Running apt-get -y dist-upgrade...
> Reading package lists...
> Building dependency tree...
> Reading state information...
> Starting
> Starting 2
> Investigating libxcb1
> Package libxcb1 has broken dep on libxcb-xlib0
> Considering libxcb-xlib0 -1 as a solution to libxcb1 37
> Added libxcb-xlib0 to the remove list
> Fixing libxcb1 via remove of libxcb-xlib0
> Done
> The following packages will be REMOVED:
> libxcb-xlib0
> The following NEW packages will be installed:
> ca-certificates cpp-4.4 dash diffutils gcc-4.4-base gnupg-curl insserv
> libc-bin libcurl3-gnutls libdb4.7 libdb4.8 libgcrypt11 libgnutls26
> libgpg-error0 libgssapi-krb5-2 libidn11 libk5crypto3 libkeyutils1 libkrb5-3
> libkrb5support0 libldap-2.4-2 liblzma2 libmpfr4 libreadline6 libsasl2-2
> libsasl2-modules libssl0.9.8 libtasn1-3 libxcb-atom1 openssl sensible-utils
> xz-utils
> The following packages will be upgraded:
> apt apt-utils bash cpp cpp-4.3 debianutils diff dpkg e2fsprogs findutils
> gcc-4.3-base gnupg gpgv grep libc6 libgcc1 libgdbm3 liblocale-gettext-perl
> libpam-modules libpam-runtime libstdc++6 libx11-6 libxcb1 libxi6 nvi perl
> perl-base perl-modules readline-common sed sysv-rc util-linux x11-utils
> 33 upgraded, 32 newly installed, 1 to remove and 0 not upgraded.
> 1 not fully installed or removed.
> Need to get 43.1MB of archives.
> After this operation, 33.9MB of additional disk space will be used.
> Get:1 http://localhost squeeze/main libc-bin 2.11.2-7 [746kB]
> Get:2 http://localhost squeeze/main libc6 2.11.2-7 [4273kB]
> Get:3 http://localhost squeeze/main gcc-4.4-base 4.4.5-8 [123kB]
> Get:4 http://localhost squeeze/main libgcc1 1:4.4.5-8 [45.0kB]
> Get:5 http://localhost squeeze/main libx11-6 2:1.3.3-4 [846kB]
> Get:6 http://localhost squeeze/main libxcb1 1.6-1 [44.3kB]
> Get:7 http://localhost squeeze/main libdb4.8 4.8.30-2 [696kB]
> Get:8 http://localhost squeeze/main libpam-modules 1.1.1-6.1 [360kB]
> Get:9 http://localhost squeeze/main libpam-runtime 1.1.1-6.1 [223kB]
> Get:10 http://localhost squeeze/main libxcb-atom1 0.3.6-1 [9978B]
> Get:11 http://localhost squeeze/main libxi6 2:1.3-5 [56.1kB]
> Get:12 http://localhost squeeze/main libmpfr4 3.0.0-2 [474kB]
> Get:13 http://localhost squeeze/main cpp-4.4 4.4.5-8 [3873kB]
> Get:14 http://localhost squeeze/main cpp 4:4.4.5-1 [15.0kB]
> Get:15 http://localhost squeeze/main x11-utils 7.5+4 [225kB]
> Get:16 http://localhost squeeze/main liblzma2 5.0.0-2 [184kB]
> Get:17 http://localhost squeeze/main xz-utils 5.0.0-2 [201kB]
> Get:18 http://localhost squeeze/main dpkg 1.15.8.5 [2255kB]
> Get:19 http://localhost squeeze/main sensible-utils 0.0.4 [5408B]
> Get:20 http://localhost squeeze/main debianutils 3.4 [49.9kB]
> Get:21 http://localhost squeeze/main dash 0.5.5.1-7.3 [108kB]
> Get:22 http://localhost squeeze/main bash 4.1-3 [1325kB]
> Get:23 http://localhost squeeze/main diffutils 1:3.0-1 [361kB]
> Get:24 http://localhost squeeze/main util-linux 2.17.2-3.3 [729kB]
> Get:25 http://localhost squeeze/main e2fsprogs 1.41.12-2 [817kB]
> Get:26 http://localhost squeeze/main findutils 4.4.2-1+b1 [689kB]
> Get:27 http://localhost squeeze/main grep 2.6.3-3 [308kB]
> Get:28 http://localhost squeeze/main perl-modules 5.10.1-16 [3481kB]
> Get:29 http://localhost squeeze/main libdb4.7 4.7.25-9 [662kB]
> Get:30 http://localhost squeeze/main libgdbm3 1.8.3-9 [46.2kB]
> Get:31 http://localhost squeeze/main perl 5.10.1-16 [4461kB]
> Get:32 http://localhost squeeze/main perl-base 5.10.1-16 [1066kB]
> Get:33 http://localhost squeeze/main sed 4.2.1-7 [251kB]
> Get:34 http://localhost squeeze/main diff 1:3.0-1 [6490B]
> Get:35 http://localhost squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB]
> Get:36 http://localhost squeeze/main libstdc++6 4.4.5-8 [341kB]
> Get:37 http://localhost squeeze/main apt-utils 0.8.8 [271kB]
> Get:38 http://localhost squeeze/main readline-common 6.1-3 [54.0kB]
> Get:39 http://localhost squeeze/main libreadline6 6.1-3 [161kB]
> Get:40 http://localhost squeeze/main gpgv 1.4.10-4 [221kB]
> Get:41 http://localhost squeeze/main gnupg 1.4.10-4 [2148kB]
> Get:42 http://localhost squeeze/main apt 0.8.8 [2145kB]
> Get:43 http://localhost squeeze/main insserv 1.14.0-2 [71.0kB]
> Get:44 http://localhost squeeze/main sysv-rc 2.88dsf-13 [73.8kB]
> Get:45 http://localhost squeeze/main libssl0.9.8 0.9.8o-3 [997kB]
> Get:46 http://localhost squeeze/main libgpg-error0 1.6-1 [43.9kB]
> Get:47 http://localhost squeeze/main libgcrypt11 1.4.5-2 [282kB]
> Get:48 http://localhost squeeze/main libtasn1-3 2.7-1 [63.1kB]
> Get:49 http://localhost squeeze/main libgnutls26 2.8.6-1 [559kB]
> Get:50 http://localhost squeeze/main libkeyutils1 1.4-1 [6942B]
> Get:51 http://localhost squeeze/main libkrb5support0 1.8.3+dfsg-3 [45.6kB]
> Get:52 http://localhost squeeze/main libk5crypto3 1.8.3+dfsg-3 [106kB]
> Get:53 http://localhost squeeze/main libkrb5-3 1.8.3+dfsg-3 [375kB]
> Get:54 http://localhost squeeze/main libgssapi-krb5-2 1.8.3+dfsg-3 [130kB]
> Get:55 http://localhost squeeze/main libidn11 1.15-2 [158kB]
> Get:56 http://localhost squeeze/main libsasl2-2 2.1.23.dfsg1-6 [115kB]
> Get:57 http://localhost squeeze/main libldap-2.4-2 2.4.23-7 [211kB]
> Get:58 http://localhost squeeze/main openssl 0.9.8o-3 [1059kB]
> Get:59 http://localhost squeeze/main ca-certificates 20090814+nmu2 [153kB]
> Get:60 http://localhost squeeze/main cpp-4.3 4.3.5-4 [3349kB]
> Get:61 http://localhost squeeze/main gcc-4.3-base 4.3.5-4 [110kB]
> Get:62 http://localhost squeeze/main libcurl3-gnutls 7.21.0-1 [266kB]
> Get:63 http://localhost squeeze/main gnupg-curl 1.4.10-4 [74.6kB]
> Get:64 http://localhost squeeze/main libsasl2-modules 2.1.23.dfsg1-6 [155kB]
> Get:65 http://localhost squeeze/main nvi 1.81.6-8.1 [278kB]
> Extracting templates from packages: 46%
Extracting templates from packages: 92%
Extracting templates from packages: 100%
> Preconfiguring packages ...
> Fetched 43.1MB in 1s (28.8MB/s)
> Selecting previously deselected package libc-bin.
> dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ...
> dpkg: yes, will deconfigure libc6 (broken by libc-bin).
> (Reading database ... 8870 files and directories currently installed.)
> Unpacking libc-bin (from .../libc-bin_2.11.2-7_amd64.deb) ...
> De-configuring libc6 ...
> Replacing files in old package libc6 ...
> Setting up libc-bin (2.11.2-7) ...
> Installing new version of config file /etc/gai.conf ...
> Installing new version of config file /etc/bindresvport.blacklist ...
> (Reading database ... 8876 files and directories currently installed.)
> Preparing to replace libc6 2.7-18lenny6 (using .../libc6_2.11.2-7_amd64.deb) ...
> Removing obsolete conffile /etc/init.d/glibc.sh ...
> Checking for services that may need to be restarted...
> Checking init scripts...
> Unpacking replacement libc6 ...
> Setting up libc6 (2.11.2-7) ...
> Checking for services that may need to be restarted...
> Checking init scripts...
> Nothing to restart.
> Selecting previously deselected package gcc-4.4-base.
> (Reading database ... 8871 files and directories currently installed.)
> Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ...
> Setting up gcc-4.4-base (4.4.5-8) ...
> (Reading database ... 8879 files and directories currently installed.)
> Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ...
> Unpacking replacement libgcc1 ...
> Setting up libgcc1 (1:4.4.5-8) ...
> (Reading database ... 8879 files and directories currently installed.)
> Preparing to replace libx11-6 2:1.1.5-2 (using .../libx11-6_2%3a1.3.3-4_amd64.deb) ...
> Unpacking replacement libx11-6 ...
> (Reading database ... 8879 files and directories currently installed.)
> Removing libxcb-xlib0 ...
> (Reading database ... 8872 files and directories currently installed.)
> Preparing to replace libxcb1 1.1-1.2 (using .../libxcb1_1.6-1_amd64.deb) ...
> Unpacking replacement libxcb1 ...
> Selecting previously deselected package libdb4.8.
> Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ...
> Setting up libdb4.8 (4.8.30-2) ...
> (Reading database ... 8874 files and directories currently installed.)
> Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1_amd64.deb) ...
> Unpacking replacement libpam-modules ...
> Setting up libpam-modules (1.1.1-6.1) ...
> Installing new version of config file /etc/security/limits.conf ...
> Installing new version of config file /etc/security/namespace.init ...
> (Reading database ... 8880 files and directories currently installed.)
> Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1_all.deb) ...
> Unpacking replacement libpam-runtime ...
> Setting up libpam-runtime (1.1.1-6.1) ...
> Selecting previously deselected package libxcb-atom1.
> (Reading database ... 8895 files and directories currently installed.)
> Unpacking libxcb-atom1 (from .../libxcb-atom1_0.3.6-1_amd64.deb) ...
> Preparing to replace libxi6 2:1.1.4-1 (using .../libxi6_2%3a1.3-5_amd64.deb) ...
> Unpacking replacement libxi6 ...
> Selecting previously deselected package libmpfr4.
> Unpacking libmpfr4 (from .../libmpfr4_3.0.0-2_amd64.deb) ...
> Selecting previously deselected package cpp-4.4.
> Unpacking cpp-4.4 (from .../cpp-4.4_4.4.5-8_amd64.deb) ...
> Preparing to replace cpp 4:4.3.2-2 (using .../cpp_4%3a4.4.5-1_amd64.deb) ...
> Unpacking replacement cpp ...
> Preparing to replace x11-utils 7.3+2+nmu1 (using .../x11-utils_7.5+4_amd64.deb) ...
> Unpacking replacement x11-utils ...
> Selecting previously deselected package liblzma2.
> Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ...
> Setting up liblzma2 (5.0.0-2) ...
> Selecting previously deselected package xz-utils.
> (Reading database ... 8927 files and directories currently installed.)
> Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ...
> Setting up xz-utils (5.0.0-2) ...
> (Reading database ... 8969 files and directories currently installed.)
> Preparing to replace dpkg 1.14.30 (using .../dpkg_1.15.8.5_amd64.deb) ...
> Unpacking replacement dpkg ...
> Setting up dpkg (1.15.8.5) ...
> Installing new version of config file /etc/logrotate.d/dpkg ...
> Selecting previously deselected package sensible-utils.
> (Reading database ... 
> (Reading database ... 5%
> (Reading database ... 10%
> (Reading database ... 15%
> (Reading database ... 20%
> (Reading database ... 25%
> (Reading database ... 30%
> (Reading database ... 35%
> (Reading database ... 40%
> (Reading database ... 45%
> (Reading database ... 50%
> (Reading database ... 55%
> (Reading database ... 60%
> (Reading database ... 65%
> (Reading database ... 70%
> (Reading database ... 75%
> (Reading database ... 80%
> (Reading database ... 85%
> (Reading database ... 90%
> (Reading database ... 95%
> (Reading database ... 100%
> (Reading database ... 8973 files and directories currently installed.)
> Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ...
> Replacing files in old package debianutils ...
> Setting up sensible-utils (0.0.4) ...
> (Reading database ... 
> (Reading database ... 5%
> (Reading database ... 10%
> (Reading database ... 15%
> (Reading database ... 20%
> (Reading database ... 25%
> (Reading database ... 30%
> (Reading database ... 35%
> (Reading database ... 40%
> (Reading database ... 45%
> (Reading database ... 50%
> (Reading database ... 55%
> (Reading database ... 60%
> (Reading database ... 65%
> (Reading database ... 70%
> (Reading database ... 75%
> (Reading database ... 80%
> (Reading database ... 85%
> (Reading database ... 90%
> (Reading database ... 95%
> (Reading database ... 100%
> (Reading database ... 8980 files and directories currently installed.)
> Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ...
> Unpacking replacement debianutils ...
> Setting up debianutils (3.4) ...
> Selecting previously deselected package dash.
> (Reading database ... 
> (Reading database ... 5%
> (Reading database ... 10%
> (Reading database ... 15%
> (Reading database ... 20%
> (Reading database ... 25%
> (Reading database ... 30%
> (Reading database ... 35%
> (Reading database ... 40%
> (Reading database ... 45%
> (Reading database ... 50%
> (Reading database ... 55%
> (Reading database ... 60%
> (Reading database ... 65%
> (Reading database ... 70%
> (Reading database ... 75%
> (Reading database ... 80%
> (Reading database ... 85%
> (Reading database ... 90%
> (Reading database ... 95%
> (Reading database ... 100%
> (Reading database ... 8976 files and directories currently installed.)
> Unpacking dash (from .../dash_0.5.5.1-7.3_amd64.deb) ...
> Adding 'diversion of /bin/sh to /bin/sh.distrib by dash'
> Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash'
> Setting up dash (0.5.5.1-7.3) ...
> (Reading database ... 
> (Reading database ... 5%
> (Reading database ... 10%
> (Reading database ... 15%
> (Reading database ... 20%
> (Reading database ... 25%
> (Reading database ... 30%
> (Reading database ... 35%
> (Reading database ... 40%
> (Reading database ... 45%
> (Reading database ... 50%
> (Reading database ... 55%
> (Reading database ... 60%
> (Reading database ... 65%
> (Reading database ... 70%
> (Reading database ... 75%
> (Reading database ... 80%
> (Reading database ... 85%
> (Reading database ... 90%
> (Reading database ... 95%
> (Reading database ... 100%
> (Reading database ... 8988 files and directories currently installed.)
> Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ...
> Unpacking replacement bash ...
> Setting up bash (4.1-3) ...
> Installing new version of config file /etc/bash.bashrc ...
> Installing new version of config file /etc/skel/.bashrc ...
> update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode.
> Selecting previously deselected package diffutils.
> (Reading database ... 
> (Reading database ... 5%
> (Reading database ... 10%
> (Reading database ... 15%
> (Reading database ... 20%
> (Reading database ... 25%
> (Reading database ... 30%
> (Reading database ... 35%
> (Reading database ... 40%
> (Reading database ... 45%
> (Reading database ... 50%
> (Reading database ... 55%
> (Reading database ... 60%
> (Reading database ... 65%
> (Reading database ... 70%
> (Reading database ... 75%
> (Reading database ... 80%
> (Reading database ... 85%
> (Reading database ... 90%
> (Reading database ... 95%
> (Reading database ... 100%
> (Reading database ... 9011 files and directories currently installed.)
> Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ...
> Replacing files in old package diff ...
> Setting up diffutils (1:3.0-1) ...
> (Reading database ... 
> (Reading database ... 5%
> (Reading database ... 10%
> (Reading database ... 15%
> (Reading database ... 20%
> (Reading database ... 25%
> (Reading database ... 30%
> (Reading database ... 35%
> (Reading database ... 40%
> (Reading database ... 45%
> (Reading database ... 50%
> (Reading database ... 55%
> (Reading database ... 60%
> (Reading database ... 65%
> (Reading database ... 70%
> (Reading database ... 75%
> (Reading database ... 80%
> (Reading database ... 85%
> (Reading database ... 90%
> (Reading database ... 95%
> (Reading database ... 100%
> (Reading database ... 9031 files and directories currently installed.)
> Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-3.3_amd64.deb) ...
> install-info: warning: maintainer scripts should not call install-info anymore,
> install-info: warning: this is handled now by a dpkg trigger provided by the
> install-info: warning: install-info package; package util-linux should be updated.
> Unpacking replacement util-linux ...
> Replacing files in old package e2fsprogs ...
> Setting up util-linux (2.17.2-3.3) ...
> Installing new version of config file /etc/init.d/hwclockfirst.sh ...
> Installing new version of config file /etc/init.d/hwclock.sh ...
> update-alternatives: using /bin/less to provide /usr/bin/pager (pager) in auto mode.
> (Reading database ... 
> (Reading database ... 5%
> (Reading database ... 10%
> (Reading database ... 15%
> (Reading database ... 20%
> (Reading database ... 25%
> (Reading database ... 30%
> (Reading database ... 35%
> (Reading database ... 40%
> (Reading database ... 45%
> (Reading database ... 50%
> (Reading database ... 55%
> (Reading database ... 60%
> (Reading database ... 65%
> (Reading database ... 70%
> (Reading database ... 75%
> (Reading database ... 80%
> (Reading database ... 85%
> (Reading database ... 90%
> (Reading database ... 95%
> (Reading database ... 100%
> (Reading database ... 9046 files and directories currently installed.)
> Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-2_amd64.deb) ...
> Unpacking replacement e2fsprogs ...
> Setting up e2fsprogs (1.41.12-2) ...
> Installing new version of config file /etc/mke2fs.conf ...
> (Reading database ... 
> (Reading database ... 5%
> (Reading database ... 10%
> (Reading database ... 15%
> (Reading database ... 20%
> (Reading database ... 25%
> (Reading database ... 30%
> (Reading database ... 35%
> (Reading database ... 40%
> (Reading database ... 45%
> (Reading database ... 50%
> (Reading database ... 55%
> (Reading database ... 60%
> (Reading database ... 65%
> (Reading database ... 70%
> (Reading database ... 75%
> (Reading database ... 80%
> (Reading database ... 85%
> (Reading database ... 90%
> (Reading database ... 95%
> (Reading database ... 100%
> (Reading database ... 9049 files and directories currently installed.)
> Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ...
> install-info: warning: maintainer scripts should not call install-info anymore,
> install-info: warning: this is handled now by a dpkg trigger provided by the
> install-info: warning: install-info package; package findutils should be updated.
> Unpacking replacement findutils ...
> Setting up findutils (4.4.2-1+b1) ...
> (Reading database ... 
> (Reading database ... 5%
> (Reading database ... 10%
> (Reading database ... 15%
> (Reading database ... 20%
> (Reading database ... 25%
> (Reading database ... 30%
> (Reading database ... 35%
> (Reading database ... 40%
> (Reading database ... 45%
> (Reading database ... 50%
> (Reading database ... 55%
> (Reading database ... 60%
> (Reading database ... 65%
> (Reading database ... 70%
> (Reading database ... 75%
> (Reading database ... 80%
> (Reading database ... 85%
> (Reading database ... 90%
> (Reading database ... 95%
> (Reading database ... 100%
> (Reading database ... 9051 files and directories currently installed.)
> Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ...
> Unpacking replacement grep ...
> Setting up grep (2.6.3-3) ...
> (Reading database ... 
> (Reading database ... 5%
> (Reading database ... 10%
> (Reading database ... 15%
> (Reading database ... 20%
> (Reading database ... 25%
> (Reading database ... 30%
> (Reading database ... 35%
> (Reading database ... 40%
> (Reading database ... 45%
> (Reading database ... 50%
> (Reading database ... 55%
> (Reading database ... 60%
> (Reading database ... 65%
> (Reading database ... 70%
> (Reading database ... 75%
> (Reading database ... 80%
> (Reading database ... 85%
> (Reading database ... 90%
> (Reading database ... 95%
> (Reading database ... 100%
> (Reading database ... 9053 files and directories currently installed.)
> Preparing to replace perl-modules 5.10.0-19lenny2 (using .../perl-modules_5.10.1-16_all.deb) ...
> Unpacking replacement perl-modules ...
> Selecting previously deselected package libdb4.7.
> Unpacking libdb4.7 (from .../libdb4.7_4.7.25-9_amd64.deb) ...
> Preparing to replace libgdbm3 1.8.3-3 (using .../libgdbm3_1.8.3-9_amd64.deb) ...
> Unpacking replacement libgdbm3 ...
> Preparing to replace perl 5.10.0-19lenny2 (using .../perl_5.10.1-16_amd64.deb) ...
> Unpacking replacement perl ...
> Preparing to replace perl-base 5.10.0-19lenny2 (using .../perl-base_5.10.1-16_amd64.deb) ...
> Unpacking replacement perl-base ...
> Setting up perl-base (5.10.1-16) ...
> (Reading database ... 
> (Reading database ... 5%
> (Reading database ... 10%
> (Reading database ... 15%
> (Reading database ... 20%
> (Reading database ... 25%
> (Reading database ... 30%
> (Reading database ... 35%
> (Reading database ... 40%
> (Reading database ... 45%
> (Reading database ... 50%
> (Reading database ... 55%
> (Reading database ... 60%
> (Reading database ... 65%
> (Reading database ... 70%
> (Reading database ... 75%
> (Reading database ... 80%
> (Reading database ... 85%
> (Reading database ... 90%
> (Reading database ... 95%
> (Reading database ... 100%
> (Reading database ... 9228 files and directories currently installed.)
> Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ...
> Unpacking replacement sed ...
> Setting up sed (4.2.1-7) ...
> (Reading database ... 
> (Reading database ... 5%
> (Reading database ... 10%
> (Reading database ... 15%
> (Reading database ... 20%
> (Reading database ... 25%
> (Reading database ... 30%
> (Reading database ... 35%
> (Reading database ... 40%
> (Reading database ... 45%
> (Reading database ... 50%
> (Reading database ... 55%
> (Reading database ... 60%
> (Reading database ... 65%
> (Reading database ... 70%
> (Reading database ... 75%
> (Reading database ... 80%
> (Reading database ... 85%
> (Reading database ... 90%
> (Reading database ... 95%
> (Reading database ... 100%
> (Reading database ... 9231 files and directories currently installed.)
> Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ...
> Unpacking replacement diff ...
> Setting up diff (1:3.0-1) ...
> (Reading database ... 
> (Reading database ... 5%
> (Reading database ... 10%
> (Reading database ... 15%
> (Reading database ... 20%
> (Reading database ... 25%
> (Reading database ... 30%
> (Reading database ... 35%
> (Reading database ... 40%
> (Reading database ... 45%
> (Reading database ... 50%
> (Reading database ... 55%
> (Reading database ... 60%
> (Reading database ... 65%
> (Reading database ... 70%
> (Reading database ... 75%
> (Reading database ... 80%
> (Reading database ... 85%
> (Reading database ... 90%
> (Reading database ... 95%
> (Reading database ... 100%
> (Reading database ... 9228 files and directories currently installed.)
> Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ...
> Unpacking replacement liblocale-gettext-perl ...
> Setting up liblocale-gettext-perl (1.05-6) ...
> (Reading database ... 
> (Reading database ... 5%
> (Reading database ... 10%
> (Reading database ... 15%
> (Reading database ... 20%
> (Reading database ... 25%
> (Reading database ... 30%
> (Reading database ... 35%
> (Reading database ... 40%
> (Reading database ... 45%
> (Reading database ... 50%
> (Reading database ... 55%
> (Reading database ... 60%
> (Reading database ... 65%
> (Reading database ... 70%
> (Reading database ... 75%
> (Reading database ... 80%
> (Reading database ... 85%
> (Reading database ... 90%
> (Reading database ... 95%
> (Reading database ... 100%
> (Reading database ... 9228 files and directories currently installed.)
> Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ...
> Unpacking replacement libstdc++6 ...
> Setting up libstdc++6 (4.4.5-8) ...
> (Reading database ... 
> (Reading database ... 5%
> (Reading database ... 10%
> (Reading database ... 15%
> (Reading database ... 20%
> (Reading database ... 25%
> (Reading database ... 30%
> (Reading database ... 35%
> (Reading database ... 40%
> (Reading database ... 45%
> (Reading database ... 50%
> (Reading database ... 55%
> (Reading database ... 60%
> (Reading database ... 65%
> (Reading database ... 70%
> (Reading database ... 75%
> (Reading database ... 80%
> (Reading database ... 85%
> (Reading database ... 90%
> (Reading database ... 95%
> (Reading database ... 100%
> (Reading database ... 9228 files and directories currently installed.)
> Preparing to replace apt-utils 0.7.20.2+lenny2 (using .../apt-utils_0.8.8_amd64.deb) ...
> Unpacking replacement apt-utils ...
> Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ...
> install-info: warning: maintainer scripts should not call install-info anymore,
> install-info: warning: this is handled now by a dpkg trigger provided by the
> install-info: warning: install-info package; package readline-common should be updated.
> Unpacking replacement readline-common ...
> Setting up readline-common (6.1-3) ...
> Selecting previously deselected package libreadline6.
> (Reading database ... 
> (Reading database ... 5%
> (Reading database ... 10%
> (Reading database ... 15%
> (Reading database ... 20%
> (Reading database ... 25%
> (Reading database ... 30%
> (Reading database ... 35%
> (Reading database ... 40%
> (Reading database ... 45%
> (Reading database ... 50%
> (Reading database ... 55%
> (Reading database ... 60%
> (Reading database ... 65%
> (Reading database ... 70%
> (Reading database ... 75%
> (Reading database ... 80%
> (Reading database ... 85%
> (Reading database ... 90%
> (Reading database ... 95%
> (Reading database ... 100%
> (Reading database ... 9243 files and directories currently installed.)
> Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ...
> Setting up libreadline6 (6.1-3) ...
> (Reading database ... 
> (Reading database ... 5%
> (Reading database ... 10%
> (Reading database ... 15%
> (Reading database ... 20%
> (Reading database ... 25%
> (Reading database ... 30%
> (Reading database ... 35%
> (Reading database ... 40%
> (Reading database ... 45%
> (Reading database ... 50%
> (Reading database ... 55%
> (Reading database ... 60%
> (Reading database ... 65%
> (Reading database ... 70%
> (Reading database ... 75%
> (Reading database ... 80%
> (Reading database ... 85%
> (Reading database ... 90%
> (Reading database ... 95%
> (Reading database ... 100%
> (Reading database ... 9256 files and directories currently installed.)
> Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4_amd64.deb) ...
> Unpacking replacement gpgv ...
> Setting up gpgv (1.4.10-4) ...
> (Reading database ... 
> (Reading database ... 5%
> (Reading database ... 10%
> (Reading database ... 15%
> (Reading database ... 20%
> (Reading database ... 25%
> (Reading database ... 30%
> (Reading database ... 35%
> (Reading database ... 40%
> (Reading database ... 45%
> (Reading database ... 50%
> (Reading database ... 55%
> (Reading database ... 60%
> (Reading database ... 65%
> (Reading database ... 70%
> (Reading database ... 75%
> (Reading database ... 80%
> (Reading database ... 85%
> (Reading database ... 90%
> (Reading database ... 95%
> (Reading database ... 100%
> (Reading database ... 9257 files and directories currently installed.)
> Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4_amd64.deb) ...
> Unpacking replacement gnupg ...
> Setting up gnupg (1.4.10-4) ...
> (Reading database ... 
> (Reading database ... 5%
> (Reading database ... 10%
> (Reading database ... 15%
> (Reading database ... 20%
> (Reading database ... 25%
> (Reading database ... 30%
> (Reading database ... 35%
> (Reading database ... 40%
> (Reading database ... 45%
> (Reading database ... 50%
> (Reading database ... 55%
> (Reading database ... 60%
> (Reading database ... 65%
> (Reading database ... 70%
> (Reading database ... 75%
> (Reading database ... 80%
> (Reading database ... 85%
> (Reading database ... 90%
> (Reading database ... 95%
> (Reading database ... 100%
> (Reading database ... 9265 files and directories currently installed.)
> Preparing to replace apt 0.7.20.2+lenny2 (using .../archives/apt_0.8.8_amd64.deb) ...
> Unpacking replacement apt ...
> Setting up apt (0.8.8) ...
> Installing new version of config file /etc/apt/apt.conf.d/01autoremove ...
> Installing new version of config file /etc/logrotate.d/apt ...
> Installing new version of config file /etc/cron.daily/apt ...
> gpg: key F42584E6: "Lenny Stable Release Key <debian-release@lists.debian.org>" not changed
> gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) <ftpmaster@debian.org>" not changed
> gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed
> gpg: key B98321F9: "Squeeze Stable Release Key <debian-release@lists.debian.org>" not changed
> gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) <ftpmaster@debian.org>" not changed
> gpg: Total number processed: 5
> gpg:              unchanged: 5
> Selecting previously deselected package insserv.
> dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ...
> dpkg: yes, will deconfigure sysv-rc (broken by insserv).
> (Reading database ... 
> (Reading database ... 5%
> (Reading database ... 10%
> (Reading database ... 15%
> (Reading database ... 20%
> (Reading database ... 25%
> (Reading database ... 30%
> (Reading database ... 35%
> (Reading database ... 40%
> (Reading database ... 45%
> (Reading database ... 50%
> (Reading database ... 55%
> (Reading database ... 60%
> (Reading database ... 65%
> (Reading database ... 70%
> (Reading database ... 75%
> (Reading database ... 80%
> (Reading database ... 85%
> (Reading database ... 90%
> (Reading database ... 95%
> (Reading database ... 100%
> (Reading database ... 9309 files and directories currently installed.)
> Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ...
> De-configuring sysv-rc ...
> Setting up insserv (1.14.0-2) ...
> (Reading database ... 
> (Reading database ... 5%
> (Reading database ... 10%
> (Reading database ... 15%
> (Reading database ... 20%
> (Reading database ... 25%
> (Reading database ... 30%
> (Reading database ... 35%
> (Reading database ... 40%
> (Reading database ... 45%
> (Reading database ... 50%
> (Reading database ... 55%
> (Reading database ... 60%
> (Reading database ... 65%
> (Reading database ... 70%
> (Reading database ... 75%
> (Reading database ... 80%
> (Reading database ... 85%
> (Reading database ... 90%
> (Reading database ... 95%
> (Reading database ... 100%
> (Reading database ... 9337 files and directories currently installed.)
> Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13_all.deb) ...
> Unpacking replacement sysv-rc ...
> Setting up sysv-rc (2.88dsf-13) ...
> info: Checking if it is safe to convert to dependency based boot.
> info: Reordering boot system, log to /var/lib/insserv/run-20101211T1438.log
> success: Enabled dependency based boot system.
> Selecting previously deselected package libssl0.9.8.
> (Reading database ... 
> (Reading database ... 5%
> (Reading database ... 10%
> (Reading database ... 15%
> (Reading database ... 20%
> (Reading database ... 25%
> (Reading database ... 30%
> (Reading database ... 35%
> (Reading database ... 40%
> (Reading database ... 45%
> (Reading database ... 50%
> (Reading database ... 55%
> (Reading database ... 60%
> (Reading database ... 65%
> (Reading database ... 70%
> (Reading database ... 75%
> (Reading database ... 80%
> (Reading database ... 85%
> (Reading database ... 90%
> (Reading database ... 95%
> (Reading database ... 100%
> (Reading database ... 9338 files and directories currently installed.)
> Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8o-3_amd64.deb) ...
> Selecting previously deselected package libgpg-error0.
> Unpacking libgpg-error0 (from .../libgpg-error0_1.6-1_amd64.deb) ...
> Selecting previously deselected package libgcrypt11.
> Unpacking libgcrypt11 (from .../libgcrypt11_1.4.5-2_amd64.deb) ...
> Selecting previously deselected package libtasn1-3.
> Unpacking libtasn1-3 (from .../libtasn1-3_2.7-1_amd64.deb) ...
> Selecting previously deselected package libgnutls26.
> Unpacking libgnutls26 (from .../libgnutls26_2.8.6-1_amd64.deb) ...
> Selecting previously deselected package libkeyutils1.
> Unpacking libkeyutils1 (from .../libkeyutils1_1.4-1_amd64.deb) ...
> Selecting previously deselected package libkrb5support0.
> Unpacking libkrb5support0 (from .../libkrb5support0_1.8.3+dfsg-3_amd64.deb) ...
> Selecting previously deselected package libk5crypto3.
> Unpacking libk5crypto3 (from .../libk5crypto3_1.8.3+dfsg-3_amd64.deb) ...
> Selecting previously deselected package libkrb5-3.
> Unpacking libkrb5-3 (from .../libkrb5-3_1.8.3+dfsg-3_amd64.deb) ...
> Selecting previously deselected package libgssapi-krb5-2.
> Unpacking libgssapi-krb5-2 (from .../libgssapi-krb5-2_1.8.3+dfsg-3_amd64.deb) ...
> Selecting previously deselected package libidn11.
> Unpacking libidn11 (from .../libidn11_1.15-2_amd64.deb) ...
> Selecting previously deselected package libsasl2-2.
> Unpacking libsasl2-2 (from .../libsasl2-2_2.1.23.dfsg1-6_amd64.deb) ...
> Selecting previously deselected package libldap-2.4-2.
> Unpacking libldap-2.4-2 (from .../libldap-2.4-2_2.4.23-7_amd64.deb) ...
> Selecting previously deselected package openssl.
> Unpacking openssl (from .../openssl_0.9.8o-3_amd64.deb) ...
> Selecting previously deselected package ca-certificates.
> Unpacking ca-certificates (from .../ca-certificates_20090814+nmu2_all.deb) ...
> Preparing to replace cpp-4.3 4.3.2-1.1 (using .../cpp-4.3_4.3.5-4_amd64.deb) ...
> Unpacking replacement cpp-4.3 ...
> Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ...
> Unpacking replacement gcc-4.3-base ...
> Selecting previously deselected package libcurl3-gnutls.
> Unpacking libcurl3-gnutls (from .../libcurl3-gnutls_7.21.0-1_amd64.deb) ...
> Selecting previously deselected package gnupg-curl.
> Unpacking gnupg-curl (from .../gnupg-curl_1.4.10-4_amd64.deb) ...
> Adding 'diversion of /usr/lib/gnupg/gpgkeys_curl to /usr/lib/gnupg/gpgkeys_curl.non_curl by gnupg-curl'
> Adding 'diversion of /usr/lib/gnupg/gpgkeys_hkp to /usr/lib/gnupg/gpgkeys_hkp.non_curl by gnupg-curl'
> Selecting previously deselected package libsasl2-modules.
> Unpacking libsasl2-modules (from .../libsasl2-modules_2.1.23.dfsg1-6_amd64.deb) ...
> Preparing to replace nvi 1.81.6-4 (using .../nvi_1.81.6-8.1_amd64.deb) ...
> invoke-rc.d: policy-rc.d denied execution of stop.
> Unpacking replacement nvi ...
> Setting up libxcb1 (1.6-1) ...
> Setting up libx11-6 (2:1.3.3-4) ...
> Setting up libxcb-atom1 (0.3.6-1) ...
> Setting up libxi6 (2:1.3-5) ...
> Setting up libmpfr4 (3.0.0-2) ...
> Setting up cpp-4.4 (4.4.5-8) ...
> Setting up cpp (4:4.4.5-1) ...
> Setting up x11-utils (7.5+4) ...
> Setting up wdm (1.28-4) ...
> 
> Configuration file `/etc/X11/wdm/wdm-config'
> ==> Modified (by you or by a script) since installation.
> ==> Package distributor has shipped an updated version.
> What would you like to do about it ?  Your options are:
> Y or I  : install the package maintainer's version
> N or O  : keep your currently-installed version
> D     : show the differences between the versions
> Z     : start a shell to examine the situation
> The default action is to keep your current version.
> *** wdm-config (Y/I/N/O/D/Z) [default=N] ? dpkg: error processing wdm (--configure):
> EOF on stdin at conffile prompt
> Setting up libdb4.7 (4.7.25-9) ...
> Setting up libgdbm3 (1.8.3-9) ...
> Setting up apt-utils (0.8.8) ...
> Setting up libssl0.9.8 (0.9.8o-3) ...
> Setting up libgpg-error0 (1.6-1) ...
> Setting up libgcrypt11 (1.4.5-2) ...
> Setting up libtasn1-3 (2.7-1) ...
> Setting up libgnutls26 (2.8.6-1) ...
> Setting up libkeyutils1 (1.4-1) ...
> Setting up libkrb5support0 (1.8.3+dfsg-3) ...
> Setting up libk5crypto3 (1.8.3+dfsg-3) ...
> Setting up libkrb5-3 (1.8.3+dfsg-3) ...
> Setting up libgssapi-krb5-2 (1.8.3+dfsg-3) ...
> Setting up libidn11 (1.15-2) ...
> Setting up libsasl2-2 (2.1.23.dfsg1-6) ...
> Setting up libldap-2.4-2 (2.4.23-7) ...
> Setting up openssl (0.9.8o-3) ...
> Setting up ca-certificates (20090814+nmu2) ...
> Updating certificates in /etc/ssl/certs... WARNING: Skipping duplicate certificate brasil.gov.br.pem
> 141 added, 0 removed; done.
> Running hooks in /etc/ca-certificates/update.d....done.
> Setting up gcc-4.3-base (4.3.5-4) ...
> Setting up cpp-4.3 (4.3.5-4) ...
> Setting up libcurl3-gnutls (7.21.0-1) ...
> Setting up gnupg-curl (1.4.10-4) ...
> Setting up libsasl2-modules (2.1.23.dfsg1-6) ...
> Setting up nvi (1.81.6-8.1) ...
> invoke-rc.d: policy-rc.d denied execution of start.
> Setting up perl-modules (5.10.1-16) ...
> Setting up perl (5.10.1-16) ...
> Errors were encountered while processing:
> wdm
> E: Sub-process /usr/bin/dpkg returned an error code (1)

Note that the configuration files were not modified during the test,
so this should not happen.

The full build log is available from:
 http://people.debian.org/~lucas/logs/2010/12/11/wdm.log

It is reproducible by installing your package in a clean chroot, using
the debconf Noninteractive frontend, and priority: critical.

This test was carried out using about 50 AMD64 nodes of the Grid'5000
platform.  Internet was not accessible from the nodes.

-- 
| Lucas Nussbaum
| lucas@lucas-nussbaum.net   http://www.lucas-nussbaum.net/ |
| jabber: lucas@nussbaum.fr             GPG: 1024D/023B3F4F |

--- End Message ---

--- Begin Message ---

• To: 606788-close@bugs.debian.org
• Subject: Bug#606788: fixed in wdm 1.28-5
• From: Agustin Martin Domingo <agmartin@debian.org>
• Date: Thu, 16 Dec 2010 14:47:25 +0000
• Message-id: <E1PTF77-00026y-Nl@franck.debian.org>

Source: wdm
Source-Version: 1.28-5

We believe that the bug you reported is fixed in the latest version of
wdm, which is due to be installed in the Debian FTP archive:

wdm_1.28-5.diff.gz
  to main/w/wdm/wdm_1.28-5.diff.gz
wdm_1.28-5.dsc
  to main/w/wdm/wdm_1.28-5.dsc
wdm_1.28-5_i386.deb
  to main/w/wdm/wdm_1.28-5_i386.deb



A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 606788@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Agustin Martin Domingo <agmartin@debian.org> (supplier of updated wdm package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.8
Date: Wed, 15 Dec 2010 12:35:20 +0100
Source: wdm
Binary: wdm
Architecture: source i386
Version: 1.28-5
Distribution: unstable
Urgency: low
Maintainer: Debian QA Group <packages@qa.debian.org>
Changed-By: Agustin Martin Domingo <agmartin@debian.org>
Description: 
 wdm        - WINGs Display Manager - an xdm replacement with a WindowMaker loo
Closes: 606788
Changes: 
 wdm (1.28-5) unstable; urgency=low
 .
   * QA upload.
   * RC: Smooth upgrades from lenny avoiding non-needed questions
     in systems with no accepted changes (Closes: #606788).
Checksums-Sha1: 
 99fadf3255f38f99fb58341c9acbedcee64ce141 1278 wdm_1.28-5.dsc
 2e7bc660ce2977cf633f7bfff595e18820844009 66668 wdm_1.28-5.diff.gz
 b44f93019717b57a5ac844d464a070207801ab65 421378 wdm_1.28-5_i386.deb
Checksums-Sha256: 
 bd79f9732809b5c6eedd56ddbc1b17dd11e3c123ba0f222864ea9f5f9a53e87b 1278 wdm_1.28-5.dsc
 38687283d76f1be388c361f10ff77b4c74a87df962aa918bf9d6e7f5c71854bb 66668 wdm_1.28-5.diff.gz
 e92a9614d016258276403e6958571b4c5c064f2eb40225e82d4b56d6c7a786da 421378 wdm_1.28-5_i386.deb
Files: 
 ed04ea17f68fd6a813a9371c43c261be 1278 x11 optional wdm_1.28-5.dsc
 254e0711b0dce3e085782ee3fae11d73 66668 x11 optional wdm_1.28-5.diff.gz
 62949cad2e0426ba2680a620d1361f4d 421378 x11 optional wdm_1.28-5_i386.deb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)

iD8DBQFNCiCvTShHqj72DpwRAiYLAJ4qM5fvuovRgU7Lv/F9NaZF7tZJjQCfe7Ni
q8t2w408WXHAbZN6c7pE5W4=
=WJa0
-----END PGP SIGNATURE-----

--- End Message ---