Bug#983932: hplip: Actual section name in models.dat doesn't match expected section name
Package: hplip
Version: 3.21.2+dfsg1-1
Severity: normal
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Dear Maintainer,
there seems to be a mismatch between [some?] section names in /usr/share/hplip/data/models/models.dat
and the name that hp-config_usb_printer determines and tries to look up:
# lsusb -d 03f0:0217
Bus 003 Device 076: ID 03f0:0217 HP, Inc LaserJet 2200
# hp-config_usb_printer -ldebug 003:076
hp-config_usb_printer[29315]: debug: param=003:076
hp-config_usb_printer[29315]: debug: Cache miss: hp_laserjet_2200
hp-config_usb_printer[29315]: debug: Reading file: /usr/share/hplip/data/models/models.dat
hp-config_usb_printer[29315]: debug: Searching for section [hp_laserjet_2200] in file /usr/share/hplip/data/models/models.dat
error: This is not a valid device
Now, the section name as in the config is actually `hp_laserjet_2200_series`.
If I manually edit the file and rename that section to `hp_laserjet_2200` it works:
# hp-config_usb_printer -ldebug 003:076
hp-config_usb_printer[29452]: debug: param=003:076
hp-config_usb_printer[29452]: debug: Cache miss: hp_laserjet_2200
hp-config_usb_printer[29452]: debug: Reading file: /usr/share/hplip/data/models/models.dat
hp-config_usb_printer[29452]: debug: Searching for section [hp_laserjet_2200] in file /usr/share/hplip/data/models/models.dat
hp-config_usb_printer[29452]: debug: Found section [hp_laserjet_2200] in file /usr/share/hplip/data/models/models.dat
hp-config_usb_printer[29452]: debug:
Setting up device: hp:/usb/HP_LaserJet_2200?serial=00JPHGC19417
hp-config_usb_printer[29452]: debug: Done.
Cheers,
Tobias
- -- Package-specific info:
Saving output in log file: /ssdhome/ranma/hp-check.log
HP Linux Imaging and Printing System (ver. 3.21.2)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: debian-testing version is not supported. Using debian-10.7 versions dependencies to verify and install...
- ---------------
| SYSTEM INFO |
- ---------------
Kernel: 5.4.78 #7 SMP Sun Nov 22 16:46:43 CET 2020 GNU/Linux
Host: nukunuku
Proc: 5.4.78 #7 SMP Sun Nov 22 16:46:43 CET 2020 GNU/Linux
Distribution: debian testing
Bitness: 64 bit
- -----------------------
| HPLIP CONFIGURATION |
- -----------------------
HPLIP-Version: HPLIP 3.21.2
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for debian distro testing version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.21.2
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.21.2
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 03/03/21 16:08:41
version = 3.21.2
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
- -------------------------
| External Dependencies |
- -------------------------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.53.3 OK -
error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - MISSING 'xsane needs to be installed'
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.31 OK -
dbus DBus - Message bus system REQUIRED - 1.12.20 OK -
error: policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 MISSING 'policykit needs to be installed'
network network -wget OPTIONAL - 1.21 OK -
error: avahi-utils avahi-utils OPTIONAL - - MISSING 'avahi-utils needs to be installed'
- ------------------------
| General Dependencies |
- ------------------------
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - OK -
cups-image CUPS image - CUPS image development files REQUIRED - - OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
libavahi-dev libavahi-dev REQUIRED - - OK -
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.9.1 OK -
error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - MISSING 'python3-notify2 needs to be installed'
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries REQUIRED - 2.2.10 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.9.1 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 8.1.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.59 OK -
- --------------
| COMPILEDEP |
- --------------
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 10.2.1 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.3 OK -
- ---------------------
| Python Extentions |
- ---------------------
cupsext CUPS-Extension REQUIRED - 3.21.2 OK -
hpmudext IO-Extension REQUIRED - 3.21.2 OK -
- ----------------------
| Scan Configuration |
- ----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.21.2 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.21.2 OK -
- ------------------------------
| DISCOVERED SCANNER DEVICES |
- ------------------------------
No Scanner found.
- --------------------------
| DISCOVERED USB DEVICES |
- --------------------------
Device URI Model
--------------------------------------------------------------- ---------------------------------------------------------------
hp:/usb/HP_LaserJet_2200?serial=00JPHGC19417 HP LaserJet 2200
- ---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
- ---------------------------------
HP_LaserJet_2200
- ----------------
Type: Unknown
Device URI: usb://HP/LaserJet%202200?serial=00JPHGC19417
PPD: /etc/cups/ppd/HP_LaserJet_2200.ppd
warning: Failed to read /etc/cups/ppd/HP_LaserJet_2200.ppd ppd file
PPD Description:
Printer status: printer HP_LaserJet_2200 is idle. enabled since Wed Mar 3 15:43:43 2021
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
- --------------
| PERMISSION |
- --------------
USB None Required - - OK Node:'/dev/bus/usb/003/076' Perm:' ranma lp rw- rw- rw- rw- r--'
- -----------
| SUMMARY |
- -----------
Missing Required Dependencies
- -----------------------------
error: 'cups' package is missing or 'cups' service is not running.
error: 'libcups2' package is missing/incompatible
error: 'libjpeg62-turbo-dev' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
Missing Optional Dependencies
- -----------------------------
error: 'xsane' package is missing/incompatible
error: 'policykit-1' package is missing/incompatible
error: 'policykit-1-gnome' package is missing/incompatible
error: 'avahi-utils' package is missing/incompatible
error: 'python3-notify2' package is missing/incompatible
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 11
Total Warnings: 1
Done.
- -- System Information:
Debian Release: bullseye/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386, arm64
Kernel: Linux 5.4.78 (SMP w/12 CPU threads)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
Versions of packages hplip depends on:
ii adduser 3.118
ii cups 2.3.3op2-3
ii hplip-data 3.21.2+dfsg1-1
ii libc6 2.31-9
ii libcups2 2.3.3op2-3
ii libdbus-1-3 1.12.20-1
ii libhpmud0 3.21.2+dfsg1-1
ii libpython3.9 3.9.1-4
ii libsane-hpaio 3.21.2+dfsg1-1
ii libsane1 1.0.31-4
ii lsb-base 11.1.0
ii printer-driver-hpcups 3.21.2+dfsg1-1
ii python3 3.9.1-1
ii python3-dbus 1.2.16-5
ii python3-gi 3.38.0-2
ii python3-pexpect 4.8.0-1
ii python3-pil 8.1.0-1
ii python3-reportlab 3.5.59-1
ii wget 1.21-1+b1
ii xz-utils 5.2.5-1.0
Versions of packages hplip recommends:
ii avahi-daemon 0.8-5
ii policykit-1 0.105-30
ii printer-driver-postscript-hp 3.20.11+dfsg0-2
ii sane-utils 1.0.31-4
Versions of packages hplip suggests:
pn hplip-doc <none>
pn hplip-gui <none>
pn python3-notify2 <none>
pn system-config-printer <none>
- -- no debconf information
-----BEGIN PGP SIGNATURE-----
iHsEARECADsWIQRxaBGQN9IG6CSWJyjmr+x6msfgvAUCYD+ndB0ccmFubWErZGVi
aWFuYnRzQHRkaWVkcmljaC5kZQAKCRDmr+x6msfgvMnKAJ41XngFGAAwbv6I0R2q
yeX5dS4dJACfRHUbIVdr1XzGfpzQqhwkYQfTftQ=
=jlRZ
-----END PGP SIGNATURE-----
Reply to: