Bug#974828: printer-driver-hpcups: bug of printer-driver-hpcups still present on debian sid kernel 5.10.3
Package: printer-driver-hpcups
Version: 3.20.11+dfsg0-3
Followup-For: Bug #974828
X-Debbugs-Cc: compte.perso.de-alain@bbox.fr
alain@sid:~/Téléchargements$ apt policy printer-driver-hpcups hplip
printer-driver-hpcups:
Installé : 3.20.11+dfsg0-3
Candidat : 3.20.11+dfsg0-3
Table de version :
*** 3.20.11+dfsg0-3 500
500 http://deb.debian.org/debian unstable/main amd64 Packages
100 /var/lib/dpkg/status
3.20.11+dfsg0-2 100
100 http://deb.debian.org/debian testing/main amd64 Packages
3.18.12+dfsg0-2 100
100 http://deb.debian.org/debian stable/main amd64 Packages
hplip:
Installé : 3.20.11+dfsg0-3
Candidat : 3.20.11+dfsg0-3
Table de version :
*** 3.20.11+dfsg0-3 500
500 http://deb.debian.org/debian unstable/main amd64 Packages
100 /var/lib/dpkg/status
3.20.11+dfsg0-2 100
100 http://deb.debian.org/debian testing/main amd64 Packages
3.18.12+dfsg0-2 100
100 http://deb.debian.org/debian stable/main amd64 Packages
alain@sid:~/Téléchargements$ hp-check
Saving output in log file: /home/alain/Téléchargements/hp-check.log
HP Linux Imaging and Printing System (ver. 3.20.11)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling
the HPLIP supplied tarball (.tar.gz or
.run) to determine if the proper dependencies are installed to successfully
compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an
already built HPLIP supplied tarball has the proper dependencies installed to
successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both
compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
-Gtk-Message: 19:48:07.916: Failed to load module "canberra-gtk-module"
warning: debian-unstable version is not supported. Using debian-10.6 versions
dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 5.10.0-3-amd64 #1 SMP Debian 5.10.13-1 (2021-02-06) GNU/Linux
Host: sid
Proc: 5.10.0-3-amd64 #1 SMP Debian 5.10.13-1 (2021-02-06) GNU/Linux
Distribution: debian unstable
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.20.11
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for debian
distro unstable version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.20.11
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.11
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[commands]
scan = /usr/bin/simple-scan %SANE_URI%
[fax]
email_address =
voice_phone =
[last_used]
device_uri = escl:http://127.0.0.1:60000
printer_name =
working_dir = .
[polling]
device_list =
enable = false
interval = 5
[refresh]
enable = false
rate = 30
type = 1
[settings]
systray_messages = 0
systray_visible = 0
[upgrade]
last_upgraded_time = 1613842662
notify_upgrade = true
pending_upgrade_time = 0
[installation]
date_time = 02/20/21 19:48:08
version = 3.20.11
<Package-name> <Package-Desc> <Required/Optional> <Min-Version>
<Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System
REQUIRED 1.1 - INCOMPAT 'CUPS may not be
installed or not running'
gs GhostScript - PostScript and PDF language interpreter and
previewer REQUIRED 7.05 9.53.3 OK -
Gtk-Message: 19:48:09.444: Failed to load module "canberra-gtk-module"
Gtk-Message: 19:48:09.468: Failed to load module "canberra-gtk-module"
xsane xsane - Graphical scanner frontend for SANE
OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program
OPTIONAL 1.0 1.0.31 OK -
dbus DBus - Message bus system
REQUIRED - 1.12.20 OK -
policykit PolicyKit - Administrative policy framework
OPTIONAL - 0.105 OK -
network network -wget
OPTIONAL - 1.21 OK -
avahi-utils avahi-utils
OPTIONAL - 0.8 OK -
------------------------
| General Dependencies |
------------------------
libjpeg libjpeg - JPEG library
REQUIRED - - OK -
cups-devel CUPS devel- Common Unix Printing System development files
REQUIRED - - OK -
cups-image CUPS image - CUPS image development files
REQUIRED - - OK -
libpthread libpthread - POSIX threads library
REQUIRED - b'2.31' OK -
libusb libusb - USB library
REQUIRED - 1.0 OK -
sane SANE - Scanning library
REQUIRED - - OK -
sane-devel SANE - Scanning library development files
REQUIRED - - OK -
libavahi-dev libavahi-dev
REQUIRED - - OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development
files REQUIRED 5.0.9 5.9 OK -
libcrypto libcrypto - OpenSSL cryptographic library
REQUIRED - 1.1.1 OK -
python3X Python 2.2 or greater - Python programming language
REQUIRED 2.2 3.9.1 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify
Desktop notifications OPTIONAL - - OK
-
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4
OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus
needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x)
REQUIRED 4.0 - MISSING 'python3-pyqt4 needs
to be installed'
python3-dbus Python DBus - Python bindings for DBus
REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries
REQUIRED - 2.2.10 OK -
python3-devel Python devel - Python development files
REQUIRED 2.2 3.9.1 OK -
python3-pil PIL - Python Imaging Library (required for commandline
scanning with hp-scan) OPTIONAL - 8.1.0 OK
-
python3-reportlab Reportlab - PDF library for Python
OPTIONAL 2.0 3.5.59 OK -
--------------
| COMPILEDEP |
--------------
libtool libtool - Library building support services
REQUIRED - 2.4.6 OK -
gcc gcc - GNU Project C and C++ Compiler
REQUIRED - 10.2.1 OK -
make make - GNU make utility to maintain groups of programs
REQUIRED 3.0 4.3 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension
REQUIRED - 3.20.11 OK -
hpmudext IO-Extension
REQUIRED - 3.20.11 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend
REQUIRED - 3.20.11 OK 'hpaio found in
/etc/sane.d/dll.conf'
scanext Scan-SANE-Extension
REQUIRED - 3.20.11 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `escl:http://127.0.0.1:60000' is a HP ENVY 5530 series [FE04D6] (USB)
flatbed scanner
device `hpaio:/usb/ENVY_5530_series?serial=CN595530XD06BX' is a Hewlett-Packard
ENVY_5530_series all-in-one
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
---------------------------------------------- ------------------------
hp:/usb/ENVY_5530_series?serial=CN595530XD06BX HP ENVY 5530 series
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
Type: Printer
Device URI: hp:/usb/ENVY_5530_series?serial=CN595530XD06BX
error: Device busy: hp:/usb/ENVY_5530_series?serial=CN595530XD06BX
error: Device not found
error: Communication status: Failed
--------------
| PERMISSION |
--------------
USB ENVY_5530 Required - -
OK Node:'/dev/bus/usb/005/005' Perm:' root lp rw- rw- rw- rw- rw- r--'
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'cups' package is missing or 'cups' service is not running.
error: 'libcups2' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 4
Total Warnings: 0
Done.
-- Package-specific info:
Saving output in log file: /home/alain/hp-check.log
HP Linux Imaging and Printing System (ver. 3.20.11)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are
installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper
dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
Gtk-Message: 19:41:24.598: Failed to load module "canberra-gtk-module"
warning: debian-unstable version is not supported. Using debian-10.6 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 5.10.0-3-amd64 #1 SMP Debian 5.10.13-1 (2021-02-06) GNU/Linux
Host: sid
Proc: 5.10.0-3-amd64 #1 SMP Debian 5.10.13-1 (2021-02-06) GNU/Linux
Distribution: debian unstable
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.20.11
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for debian distro unstable version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.20.11
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.11
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[commands]
scan = /usr/bin/simple-scan %SANE_URI%
[fax]
email_address =
voice_phone =
[last_used]
device_uri = escl:http://127.0.0.1:60000
printer_name =
working_dir = .
[polling]
device_list =
enable = false
interval = 5
[refresh]
enable = false
rate = 30
type = 1
[settings]
systray_messages = 0
systray_visible = 0
[upgrade]
last_upgraded_time = 1613842662
notify_upgrade = true
pending_upgrade_time = 0
[installation]
date_time = 02/20/21 19:41:25
version = 3.20.11
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.53.3 OK -
Gtk-Message: 19:41:26.134: Failed to load module "canberra-gtk-module"
Gtk-Message: 19:41:26.156: Failed to load module "canberra-gtk-module"
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.31 OK -
dbus DBus - Message bus system REQUIRED - 1.12.20 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.21 OK -
avahi-utils avahi-utils OPTIONAL - 0.8 OK -
------------------------
| General Dependencies |
------------------------
libjpeg libjpeg - JPEG library REQUIRED - - OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - OK -
cups-image CUPS image - CUPS image development files REQUIRED - - OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
sane SANE - Scanning library REQUIRED - - OK -
sane-devel SANE - Scanning library development files REQUIRED - - OK -
libavahi-dev libavahi-dev REQUIRED - - OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.9 OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.9.1 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries REQUIRED - 2.2.10 OK -
python3-devel Python devel - Python development files REQUIRED 2.2 3.9.1 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 8.1.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.59 OK -
--------------
| COMPILEDEP |
--------------
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 10.2.1 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.3 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.20.11 OK -
hpmudext IO-Extension REQUIRED - 3.20.11 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.20.11 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.20.11 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `escl:http://127.0.0.1:60000' is a HP ENVY 5530 series [FE04D6] (USB) flatbed scanner
device `hpaio:/usb/ENVY_5530_series?serial=CN595530XD06BX' is a Hewlett-Packard ENVY_5530_series all-in-one
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
---------------------------------------------- ----------------------------------
hp:/usb/ENVY_5530_series?serial=CN595530XD06BX HP ENVY 5530 series
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
ENVY_5530
---------
Type: Printer
Device URI: hp:/usb/ENVY_5530_series?serial=CN595530XD06BX
PPD: /etc/cups/ppd/ENVY_5530.ppd
warning: Failed to read /etc/cups/ppd/ENVY_5530.ppd ppd file
PPD Description:
Printer status: printer ENVY_5530 is idle. enabled since Sat Feb 20 18:23:51 2021
[31;01merror: Device busy: hp:/usb/ENVY_5530_series?serial=CN595530XD06BX[0m
error: Device not found
error: Communication status: Failed
--------------
| PERMISSION |
--------------
USB ENVY_5530 Required - - OK Node:'/dev/bus/usb/005/005' Perm:' root lp rw- rw- rw- rw- rw- r--'
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'cups' package is missing or 'cups' service is not running.
error: 'libcups2' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 4
Total Warnings: 0
Done.
-- System Information:
Debian Release: bullseye/sid
APT prefers unstable
APT policy: (500, 'unstable'), (100, 'testing'), (100, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 5.10.0-3-amd64 (SMP w/16 CPU threads)
Kernel taint flags: TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages printer-driver-hpcups depends on:
ii cups 2.3.3op2-3
ii cups-filters [ghostscript-cups] 1.28.7-1
ii libc6 2.31-9
ii libcups2 2.3.3op2-3
ii libdbus-1-3 1.12.20-1
ii libgcc-s1 10.2.1-6
ii libhpmud0 3.20.11+dfsg0-3
ii libjpeg62-turbo 1:2.0.6-1
ii libstdc++6 10.2.1-6
ii zlib1g 1:1.2.11.dfsg-2
printer-driver-hpcups recommends no packages.
Versions of packages printer-driver-hpcups suggests:
ii hplip 3.20.11+dfsg0-3
pn hplip-doc <none>
-- no debconf information
Reply to: