Bug#639325: marked as done (error /usr/lib/cups/filter/c2esp failed and won't print)
Your message dated Thu, 3 Nov 2011 15:57:53 +0100
with message-id <email@example.com>
and subject line Re: bug 639325 c2esp 18-5 update
has caused the Debian Bug report #639325,
regarding error /usr/lib/cups/filter/c2esp failed and won't print
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact firstname.lastname@example.org
Debian Bug Tracking System
Contact email@example.com with problems
--- Begin Message ---
- To: firstname.lastname@example.org
- Subject: error /usr/lib/cups/filter/c2esp failed and won't print
- From: Cia Watson <email@example.com>
- Date: Thu, 25 Aug 2011 16:25:21 -0700
- Message-id: <firstname.lastname@example.org>
Subject: error /usr/lib/cups/filter/c2esp failed and won't print
When I send a job to the printer it shows 'printing' but nothing prints. Then
Cups shows status of stopped with above error, the log also shows:
printer-state-reasons=none Stopping unresponsive job!
It works fine on the same pc when booted to Debian stable (squeeze).
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.0.0-1-amd64 (SMP w/3 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages c2esp depends on:
ii libc6 2.13-16 Embedded GNU C Library: Shared
lib ii libcups2 1.4.8-2 Common UNIX Printing
System(tm) - ii libcupsdriver1 1.4.8-2 Common UNIX
Printing System(tm) - ii libcupsimage2 1.4.8-2 Common
UNIX Printing System(tm) - ii python 2.6.7-3
interactive high-level object-orie ii xz-utils
5.0.0-2 XZ-format compression utilities
Versions of packages c2esp recommends:
ii cups 1.4.8-2 Common UNIX Printing System(tm)
- ii cups-client 1.4.8-2 Common UNIX Printing
Versions of packages c2esp suggests:
ii psutils 1.17-29 A collection of PostScript
-- no debconf information
--- End Message ---
--- Begin Message ---
- To: Cia Watson <email@example.com>
- Cc: firstname.lastname@example.org
- Subject: Re: bug 639325 c2esp 18-5 update
- From: Didier Raboud <email@example.com>
- Date: Thu, 3 Nov 2011 15:57:53 +0100
- Message-id: <firstname.lastname@example.org>
- In-reply-to: <email@example.com>
- References: <firstname.lastname@example.org>
Le dimanche, 11 septembre 2011 00.12:01, Cia Watson a écrit :
> After cups was upgraded to v1.5.0 in testing / Wheezy, I installed c2esp
> 18-4 and the update to v18-5 came through when I updated today. I
> re-installed the printer (Kodak ESP 5250) and it successfully printed a
> test page.
Hi Cia, and sorry for the delay in my answer.
I'm happy to hear that it is finally working for you, hereby marking this bug
as fixed by the 18-5 version.
> I then tested it to print a document from AbiWord, and selected resolution
> of 300x1200 - it didn't print, but it didn't have any error messages,
> though the print job status showed: "c2esp: Page 1 Stripe 5". The printer
> displayed 'printing' but nothing else happened. If I cancel the print job,
> the 'printing' message doesn't go away on the printer until I hit the
> power button and it resets itself, I had to do this several times during
> the following tests.
> I found a photo to print in Gimp, asked it
> to print using Gutenprint and that succeeded. No option for selecting
> resolution, though.
> I went back to the AbiWord document, selected resolution 600x1200 using
> black & white, and this time it printed.
> Using resolution 300x1200 color, dithered also works. It appears that
> selecting 300x1200 non-dithered or black & white are the only 2 options
> that aren't working now. It's probably a conspiracy to force me to use
> more ink. :-)
> It's basically working, just not with all the options. The original error
> is resolved. Let me know if I should file a new bug report and you can
> close this one?
I would appreciate if you could try the 19-2 version (in testing and unstable)
and/or the 21~rc3-1 (in experimental) and report new bugs against printer-
driver-c2esp if you still encounter issues.
--- End Message ---