[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#380605: marked as done (foomatic-filters-ppds: Epson EPL-5800L requires ijs server not in debian)

Your message dated Wed, 9 Feb 2011 16:31:32 +0100
with message-id <201102091631.34569.odyx@debian.org>
and subject line foomatic-filters-ppds: Closing some bugs
has caused the Debian Bug report #380605,
regarding foomatic-filters-ppds: Epson EPL-5800L requires ijs server not in debian
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
380605: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=380605
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: foomatic-filters-ppds
Version: 20060712-1
Severity: normal


Hi!

Here at the office we run the (I know quite proprietary) Epson EPL-5800L
Laser Printer. After a fresh installation of CUPS wit gutenprint and
foomatic printing the Test Page spawned an error in foomatic rip, which at a
closer look occured, because in the PPD Epson-EPL-5800L-epl5800l.ppd.gz
there is ijs mode specified:

> [...]
> *FoomaticIDs: Epson-EPL-5800L epl5800l
> *FoomaticRIPCommandLine: "gs -q -dBATCH -dSAFER -dNOPAUSE -sProcessCol&&
> orModel=DeviceGray -dBitsPerSample=1 -sDEVICE=ijs %A %Z -sIjsServer=ij&&
> s_server_epsonepl -dIjsUseOutputFD -sDeviceManufacturer=Epson -sDevice&&
> Model=EPL5800L -sIjsParams=&quot;%B&quot; -sOutputFile=- -"
> *End
> [...]


That particular ijs server is not installed and so the printing fails:

> [...]
> D [31/Jul/2006:11:02:20 +0200] [Job 3] foomatic-gswrapper: gs '-dBATCH' '-dSAFER' '-dNOPAUSE' '-sProcessColorModel=DeviceGray' '-dBitsPerSample=1'
> '-sDEVICE=ijs' '-sIjsServer=ijs_server_epsonepl' '-dIjsUseOutputFD' '-sDeviceManufacturer=Epson' '-sDeviceModel=EPL5800L'
> '-sIjsParams=EplFlowControl=off,EplDpi=600,EplDensity=3,EplRitech=on,EplTonerSave=off,''-sOutputFile=/dev/fd/3' '/dev/fd/0' 3>&1 1>&2
> D [31/Jul/2006:11:02:20 +0200] [Job 3] ESP Ghostscript 815.01 (2005-09-22)
> D [31/Jul/2006:11:02:20 +0200] [Job 3] Copyright (C) 2004 artofcode LLC,Benicia, CA.  All rights reserved.
> D [31/Jul/2006:11:02:20 +0200] [Job 3] This software comes with NO WARRANTY: see the file PUBLIC for details.
> D [31/Jul/2006:11:02:20 +0200] [Job 3] sh: ijs_server_epsonepl: command not found
> D [31/Jul/2006:11:02:20 +0200] [Job 3] ESP Ghostscript 815.01: Can't start ijs server "ijs_server_epsonepl"
> D [31/Jul/2006:11:02:20 +0200] [Job 3] Warning: the map file cidfmap was not found.
> D [31/Jul/2006:11:02:20 +0200] [Job 3] **** Unable to open the initial device, quitting.
> D [31/Jul/2006:11:02:20 +0200] [Job 3] renderer return value: 1
> D [31/Jul/2006:11:02:20 +0200] [Job 3] renderer received signal: 1
> D [31/Jul/2006:11:02:20 +0200] [Job 3] tail process done writing data to STDOUT
> D [31/Jul/2006:11:02:20 +0200] [Job 3] KID4 exited with status 0
> D [31/Jul/2006:11:02:20 +0200] [Job 3] KID4 finished
> D [31/Jul/2006:11:02:20 +0200] [Job 3] KID3 exited with status 3
> D [31/Jul/2006:11:02:20 +0200] [Job 3] Renderer exit stat: 3
> D [31/Jul/2006:11:02:20 +0200] [Job 3] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
> D [31/Jul/2006:11:02:20 +0200] [Job 3] error: Illegal seek (29)
> D [31/Jul/2006:11:02:20 +0200] [Job 3] Possible error on renderer command line or PostScript error. Check options.
> D [31/Jul/2006:11:02:20 +0200] [Job 3] Renderer process finished
> D [31/Jul/2006:11:02:20 +0200] [Job 3] Killing process 10960 (KID3)
> D [31/Jul/2006:11:02:20 +0200] [Job 3] Process dying with "Error closing renderer", exit stat: 3
> D [31/Jul/2006:11:02:20 +0200] [Job 3] error: Bad file descriptor (9)
> D [31/Jul/2006:11:02:20 +0200] [Job 3] Error closing renderer
> E [31/Jul/2006:11:02:20 +0200] PID 10955 (/usr/lib/cups/filter/foomatic-rip) stopped with status 3!

This can be solved by installing the "aliened" rpm from http://sourceforge.net/projects/epsonepl/
because this contains the requiered /usr/bin/ijs_server_epsonep (the
remaining files are assigned to /usr/share/doc by alien), because
ijs_server_epsonep is not in debian.

Will it be possible not to use the ijs or to provide ijs_server_epsonep?

Regards,

Sebastian

-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-1-686
Locale: LANG=de_DE@euro, LC_CTYPE=de_DE@euro (charmap=ISO-8859-15)

Versions of packages foomatic-filters-ppds depends on:
ii  foomatic-filters        3.0.2-20060712-1 linuxprinting.org printer support 
ii  hpijs-ppds [hplip-ppds] 2.1.10+0.9.11-2  HP Linux Printing and Imaging - HP

Versions of packages foomatic-filters-ppds recommends:
ii  cupsys                        1.2.2-1    Common UNIX Printing System(tm) - 

-- no debconf information

--- End Message ---
--- Begin Message --- 
Version: 4.0.4-2

Hi,

You reported this bug against the foomatic-filters-ppds package. Since version 
4.0.4-2, this package is empty. Furthermore, the Debian project just released 
Debian Squeeze, which ships this foomatic-filters-ppds.

So I am hereby closing the bugs concerning the contents of foomatic-filters-ppds 
as "solved by the version currently in Squeeze.

If your issue is still a valid one, please say so and we'll find a package to 
reassign the bug to.

Thanks for your understanding and cheers,

OdyX

-- 
Didier Raboud, proud Debian Developer.
CH-1020 Renens
odyx@debian.org

Attachment: signature.asc
Description: This is a digitally signed message part.


--- End Message ---
Reply to: