[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Xorg non starting (was : Re: Updated installation images for Debian Ports 2019-11-22)



A little update on this topic. See below.

• I had to put a second screen on my graphic card (Radeon 9800 Pro) because after some messages on the screen, they disappeared and left me with a black screen. With two screens, I could see the machine boot on the first screen (ADC connector) and then switch to the second screen (DVI connector) and display the  end of the boot messages. This doesn’t occur with the install media and in didn’t occur in Wheezy nor Jessie. I need a way to fix this. Any help ?

This doesn't happen anymore with a 9600 card.

• Last : X fails to load. At the end of the boot, the system left me with a big black screen and a little « —« cursor at the top left of the screen. display-manager.service failed, living me with an unusable console and I couldn’t with to another VT. From ssh on another machine,I’ve tracked the failing service (lightdm), run Xorg -configure and tried to launch it with the created config file. I finally could see error messages on my screen and now I can log in. Here is the message I’ve got  when launching X with the created xorg.conf

root@gromac:/home/sid# X -config /root/xorg.conf.new

X.Org <http://x.org> X Server 1.20.6
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.19.0-5-powerpc64 ppc64 Debian
Current Operating System: Linux gromac 5.3.0-3-powerpc64 #1 SMP Debian 5.3.15-1 (2019-12-07) ppc64 Kernel command line: BOOT_IMAGE=/boot/vmlinux-5.3.0-3-powerpc64 root=UUID=cbe8e252-6f1a-4862-b27d-87619d29fbfb ro quiet
Build Date: 25 November 2019  09:49:09AM
xorg-server 2:1.20.6-1 (https://www.debian.org/support)
Current version of pixman: 0.36.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 13 13:43:08 2019
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(II) AMDGPU(0): [KMS] Kernel modesetting enabled.
amdgpu_device_initialize: DRM version is 2.50.0 but this driver is only compatible with 3.x.x.
(II) AMDGPU(1): [KMS] Kernel modesetting enabled.
amdgpu_device_initialize: DRM version is 2.50.0 but this driver is only compatible with 3.x.x.
(II) AMDGPU(G0): [KMS] Kernel modesetting enabled.
amdgpu_device_initialize: DRM version is 2.50.0 but this driver is only compatible with 3.x.x.
(EE)
Fatal server error:
(EE) no screens found(EE)
(EE)
Please consult the The X.Org <http://x.org> Foundation support
at http://wiki.x.org
 for help.
(EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(EE)
(EE) Server terminated with error (1). Closing log file.
root@gromac:/home/sid#


I've got the exact same error with this 9600 card. So I've disabled lightdm.service for now. Any thought ? Is Xorg broken on powerpc for the moment ?


Also, Is there a way to boot osX with grub now ?

 I've got a triple boot install : sid (with grub on /dev/sda2), osX and wheezy (with yaboot on /dev/sdb2). But I can't boot sid with yaboot and I can't boot osX with grub. I can't mount my sid ext4 partition in wheezy either. Are there some new options to the ext4 filesystem enabled in sid that aren't available in wheezy. Can yaboot access to the kernel on the sid partition ? .

The grub partition doesn't appear in the apple openfirmware boot screen (the one you can access  pressing the alt key at startup). Is there a way to have it there ?

I hope someone can finally help me.

Cheers,

Bertrand


Reply to: