Re: radeon 9000 PowerMac G4
I have had KMS working on my PowerBook and iBook G4 machines. This is the first time those kernel boot options have not worked.
Sent from my iPhone
> On May 20, 2015, at 2:55 AM, Rick Thomas <rbthomas@pobox.com> wrote:
>
> Hi Herminio,
>
> I gather you’re hoping for video acceleration via KMS?
>
> If not, you can use boot parameters
> nomodeset vga=0x31B
>
> This gives un-accelerated graphics, but at least it doesn’t freeze (on my machine) or give scrambled colors. The default jessie amd64 install either gives scrambled colors or freezes randomly. The vga=0x31b parameter sets the video resolution, in this case it’s 1280x1024, 24-bits.
>
> See
> http://en.wikipedia.org/wiki/VESA_BIOS_Extensions#Linux_video_mode_numbers
> for a chart of resolution options that may be used.
>
> The web page also suggests the “hwinfo —framebuffer” command. You’ll need to install the “hwinfo” package — it’s available in Debian, but it seems to only work on x86/amd64 hardware. I tried it on a powerpc64 machine and it gave me lots of error messages and no useful output.
>
> For powerpc hardware, there’s the “fbset” command (also available as a separate package in Debian).
>
> I’ve seen hints that the “vga=“ boot-option may not be supported on non-x86/amd64 hardware, but it’s certainly worth a try! And I can vouch from personal experience that the “nomodeset” option is supported, and works, on powerpc/powerc64.
>
> My graphics card (on the amd64 machine) is
> 09:02.0 VGA compatible controller: NVIDIA Corporation NV44A [GeForce 6200] (rev a1)
>
> On the powerpc64 machine, it’s
> 0000:0b:00.0 VGA compatible controller: NVIDIA Corporation NV43 [GeForce 6600 LE] (rev a2)
>
> Hope that helps!
> Enjoy!
> Rick
>
>> On May 19, 2015, at 11:11 PM, Herminio Hernandez Jr <herminio.hernandezjr@gmail.com> wrote:
>>
>> On a Powermac G4 when I use these parameters
>> radeon.agpmode=-1
>> radeon.modeset=1 radeon.agpmode=-1
>> radeon.modeset=1 video=offb:off radeon.agpmode=-1
>>
>> KMS does not load fbdev does and my colors are all off. However if I do
>> this
>>
>> radeon.modeset=1 video=offb:off video=radeonfb:off radeon.agpmode=-1
>>
>> then I get the right colors but the screen freezes. I am betting it is
>> due to the really old card I have. I am planning replacing it with a
>> better one, but I was wonder has anyone found a work around. Thanks!
>>
>>
>> --
>> To UNSUBSCRIBE, email to debian-powerpc-REQUEST@lists.debian.org
>> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>> Archive: [🔎] 1432102289.15896.3.camel@gmail.com">https://lists.debian.org/[🔎] 1432102289.15896.3.camel@gmail.com
>
Reply to: