Radeon driver failed to load
Hello Debian-powerpc users:
(Please CC me, I'm currently not on the list, thanks.)
I'm having troubles with my Radeon driver since some weeks ago.
When new xserver version forces to use KMS I active it but I have
continuous freezes of the X, sometimes my machine is accesible through
ssh other not. These crash stops (well, last saturday I have one again,
I attach dmesg output) when change to 3.11 kernel but Radeon driver
don't load and I can't use some apps like Freecad.
The error I'm getting is this:
------------------------ console ----------------
razer@mac-lobo:~$ LIBGL_DEBUG=verbose glxinfo |grep -i render
libGL: OpenDriver: trying /usr/lib/powerpc-linux-gnu/dri//tls/r300_dri.so
libGL error: failed to load driver: r300
libGL: OpenDriver: trying /usr/lib/powerpc-linux-gnu/dri//tls/swrast_dri.so
libGL error: failed to load driver: swrast
Error: couldn't find RGB GLX visual or fbconfig
Error: couldn't find RGB GLX visual or fbconfig
razer@mac-lobo:~$ ll /usr/lib/powerpc-linux-gnu/dri/tls/r*
-rw-r--r-- 1 root root 310K oct 22 12:41
/usr/lib/powerpc-linux-gnu/dri/tls/r200_dri.so
-rw-r--r-- 1 root root 5,3M oct 22 12:41
/usr/lib/powerpc-linux-gnu/dri/tls/r300_dri.so
-rw-r--r-- 1 root root 5,9M oct 22 12:41
/usr/lib/powerpc-linux-gnu/dri/tls/r600_dri.so
-rw-r--r-- 1 root root 284K oct 22 12:41
/usr/lib/powerpc-linux-gnu/dri/tls/radeon_dri.so
razer@mac-lobo:~$ ll /usr/lib/powerpc-linux-gnu/dri/tls/swrast_dri.so
-rw-r--r-- 1 root root 22K oct 22 12:41
/usr/lib/powerpc-linux-gnu/dri/tls/swrast_dri.so
-----------------------------------------------------
There are no success with searchs related to this error.
The data I think you need in order to help me are following. My machine
is a PowerBook G4 from October 2005:
------------- console --------------
razer@mac-lobo:~$ cat /proc/cpuinfo
processor : 0
cpu : 7447A, altivec supported
clock : 833.333000MHz
revision : 1.2 (pvr 8003 0102)
bogomips : 36.86
timebase : 18432000
platform : PowerMac
model : PowerBook5,7
machine : PowerBook5,7
motherboard : PowerBook5,7 MacRISC3 Power Macintosh
detected as : 287 (PowerBook G4 17")
pmac flags : 0000001a
L2 cache : 512K unified
pmac-generation : NewWorld
Memory : 1024 MB
----------------------------------------
I'm living in Sid:
------------- console ---------------------
razer@mac-lobo:~$ cat /etc/debian_version
jessie/sid
-------------------------------------------
and has installed these related packages:
--------------------- console -------------------------
razer@mac-lobo:~$ dpkg -l |egrep "xserver|drm|radeon|mesa" |awk '{print
$2 $3}'
libdrm-dev2.4.46-3
libdrm-nouveau1a:powerpc2.4.40-1~deb7u2
libdrm-nouveau2:powerpc2.4.46-3
libdrm-radeon1:powerpc2.4.46-3
libdrm2:powerpc2.4.46-3
libegl1-mesa:powerpc9.2.2-1
libegl1-mesa-drivers:powerpc9.2.2-1
libgl1-mesa-dev9.2.2-1
libgl1-mesa-dri:powerpc9.2.2-1
libgl1-mesa-glx:powerpc9.2.2-1
libglapi-mesa:powerpc9.2.2-1
libglu1-mesa:powerpc9.0.0-2
libglu1-mesa-dev9.0.0-2
libopenvg1-mesa:powerpc9.2.2-1
libosmesa6:powerpc9.2.2-1
mesa-common-dev9.2.2-1
mesa-utils8.1.0-2
radeontool1.6.2-1.1
x11-xserver-utils7.7+1
xserver-common2:1.14.3-4
xserver-xephyr2:1.14.3-4
xserver-xorg1:7.6+7
xserver-xorg-core2:1.14.3-4
xserver-xorg-input-evdev1:2.8.2-1
xserver-xorg-input-synaptics1.7.1-2+b1
xserver-xorg-video-radeon1:7.2.0-1+b2
-----------------------------------------------------------
I revise some docs from Internet like [0], [1], [2] and others but
nothing helps (including old discussions on this list).
My card and firmware packages:
------------------ console ----------------
razer@mac-lobo:~$ lspci -nn | grep VGA
0000:00:10.0 VGA compatible controller [0300]: Advanced Micro Devices,
Inc. [AMD/ATI] RV350/M10 [Mobility Radeon 9600 PRO Turbo] [1002:4e50]
razer@mac-lobo:~$ dpkg -l |egrep firmware |awk '{print $2 $3}'
b43-fwcutter1:018-2
firmware-b43-installer1:018-2
firmware-linux-free3.2
firmware-linux-nonfree0.40
ipxe1.0.0+git-20120202.f6840ba-3
ipxe-qemu1.0.0+git-20120202.f6840ba-3
--------------------------------------------------------
My yaboot.conf are:
------------ console --------------------
razer@mac-lobo:~$ cat /etc/yaboot.conf
## yaboot.conf generated by debian-installer
##
## run: "man yaboot.conf" for details. Do not make changes until you have!!
## see also: /usr/share/doc/yaboot/examples for example configurations.
##
## For a dual-boot menu, add one or more of:
## bsd=/dev/hdaX, macos=/dev/hdaY, macosx=/dev/hdaZ
#boot="/dev/disk/by-id/ata-WDC_WD2500BEVE-00A0HT0_WD-WXR1AB0W2983-part2"
boot="/dev/sda2"
device=/pci@f4000000/ata-6@d/disk@0
partition=3
root="/dev/mapper/Powerbook-raiz"
timeout=50
install=/usr/lib/yaboot/yaboot
magicboot=/usr/lib/yaboot/ofboot
enablecdboot
image=/vmlinux
label=Linux
read-only
initrd=/initrd.img
append= "video=radeonfb:off radeon.modeset=1 radeon.agpmode=-1"
image=/vmlinux.old
label=old
read-only
initrd=/initrd.img.old
image=/vmlinux-3.2.0-4-powerpc
label=3.2
read-only
initrd=/initrd.img-3.2.0-4-powerpc
#append= "video=radeonfb:off radeon.modeset=1 radeon.agpmode=-1"
-------------------------------------------------
and I attach my xorg.conf file.
Dmesg related info:
---------------------- console -------------------
razer@mac-lobo:~$ dmesg |egrep "radeon|drm|r300"
[ 0.000000] Kernel command line: root=/dev/mapper/Powerbook-raiz ro
video=radeonfb:off radeon.modeset=1 radeon.agpmode=-1
[ 7.209804] [drm] Initialized drm 1.1.0 20060810
[ 7.970031] [drm] radeon kernel modesetting enabled.
[ 7.987055] fb: conflicting fb hw usage radeondrmfb vs OFfb
ATY,Jasper - removing generic driver
[ 8.005732] fb: conflicting fb hw usage radeondrmfb vs OFfb
ATY,Jasper - removing generic driver
[ 8.006462] radeon 0000:00:10.0: enabling device (0006 -> 0007)
[ 8.006908] [drm] initializing kernel modesetting (RV350
0x1002:0x4E50 0x1002:0x4E50).
[ 8.006926] [drm] Forcing AGP to PCI mode
[ 8.006940] [drm] register mmio base: 0xB0000000
[ 8.006946] [drm] register mmio size: 65536
[ 8.006998] radeon 0000:00:10.0: Invalid ROM contents
[ 8.007024] radeon 0000:00:10.0: Invalid ROM contents
[ 8.007035] [drm:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
[ 8.007054] [drm] Using device-tree clock info
[ 8.007064] [drm] Generation 2 PCI interface, using max accessible memory
[ 8.007076] radeon 0000:00:10.0: VRAM: 128M 0x00000000B8000000 -
0x00000000BFFFFFFF (128M used)
[ 8.007089] radeon 0000:00:10.0: GTT: 512M 0x0000000098000000 -
0x00000000B7FFFFFF
[ 8.007115] [drm] Detected VRAM RAM=128M, BAR=128M
[ 8.007122] [drm] RAM width 128bits DDR
[ 8.007308] [drm] radeon: 128M of VRAM memory ready
[ 8.007317] [drm] radeon: 512M of GTT memory ready.
[ 8.007359] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 8.010460] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 8.012900] [drm] PCI GART of 512M enabled (table at 0x0000000001F00000).
[ 8.012990] radeon 0000:00:10.0: WB enabled
[ 8.013010] radeon 0000:00:10.0: fence driver on ring 0 use gpu addr
0x0000000098000000 and cpu addr 0xc1e64000
[ 8.013027] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.013034] [drm] Driver supports precise vblank timestamp query.
[ 8.013078] [drm] radeon: irq initialized.
[ 8.013110] [drm] Loading R300 Microcode
[ 8.192756] radeon 0000:00:10.0: firmware: agent loaded
radeon/R300_cp.bin into memory
[ 8.193064] [drm] radeon: ring at 0x0000000098001000
[ 8.193104] [drm] ring test succeeded in 4 usecs
[ 8.193385] [drm] ib test succeeded in 0 usecs
[ 8.193602] [drm] Connector Table: 3 (powerbook external tmds)
[ 8.193615] [drm] No panel info found in BIOS
[ 8.193628] [drm] Panel info derived from registers
[ 8.193635] [drm] Panel Size 1440x900
[ 8.193704] [drm] No valid Ext TMDS info found in BIOS
[ 8.193760] [drm] No TV DAC info found in BIOS
[ 8.584511] [drm] radeon legacy LVDS backlight initialized
[ 8.584524] [drm] Radeon Display Connectors
[ 8.584530] [drm] Connector 0:
[ 8.584536] [drm] LVDS-1
[ 8.584544] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 8.584551] [drm] Encoders:
[ 8.584557] [drm] LCD1: INTERNAL_LVDS
[ 8.584563] [drm] Connector 1:
[ 8.584569] [drm] DVI-I-1
[ 8.584574] [drm] HPD2
[ 8.584580] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 8.584587] [drm] Encoders:
[ 8.584593] [drm] DFP2: INTERNAL_DVO1
[ 8.584598] [drm] CRT1: INTERNAL_DAC1
[ 8.584604] [drm] Connector 2:
[ 8.584610] [drm] SVIDEO-1
[ 8.584615] [drm] Encoders:
[ 8.584621] [drm] TV1: INTERNAL_DAC2
[ 9.117017] [drm] fb mappable at 0xB8040000
[ 9.117045] [drm] vram apper at 0xB8000000
[ 9.117051] [drm] size 8294400
[ 9.117057] [drm] fb depth is 24
[ 9.117063] [drm] pitch is 7680
[ 9.864516] radeon 0000:00:10.0: fb0: radeondrmfb frame buffer device
[ 9.864804] radeon 0000:00:10.0: registered panic notifier
[ 9.865136] [drm] Initialized radeon 2.34.0 20080528 for 0000:00:10.0
on minor 0
---------------------------------------------------------------------
I think that there are no related modules inserting conflicts:
------------------ console -----------------
razer@mac-lobo:~$ cat /etc/modprobe.d/radeon-kms.conf
#options radeon modeset=1
razer@mac-lobo:~$ cat /etc/modprobe.d/fbdev-blacklist.conf
# This file blacklists most old-style PCI framebuffer drivers.
blacklist arkfb
blacklist aty128fb
blacklist atyfb
blacklist radeonfb
blacklist cirrusfb
blacklist cyber2000fb
blacklist gx1fb
blacklist gxfb
blacklist kyrofb
blacklist matroxfb_base
blacklist mb862xxfb
blacklist neofb
blacklist nvidiafb
blacklist pm2fb
blacklist pm3fb
blacklist s3fb
blacklist savagefb
blacklist sisfb
blacklist tdfxfb
blacklist tridentfb
blacklist viafb
blacklist vt8623fb
----------------------------------------------------
Sorry for long, long mail and for my bad english.
Thanks so much in advance.
Best regards.
Salud y Revolución.
Lobo.
[0] https://help.ubuntu.com/community/RadeonDriver
[1] http://dri.freedesktop.org/wiki/ATIRadeon/
[2] http://wiki.x.org/wiki/RadeonFeature/
--
Libertad es poder elegir en cualquier momento. Ahora yo elijo GNU/Linux,
para no atar mis manos con las cadenas del soft propietario.
Porque la libertad no es tu derecho, es tu responsabilidad.
http://www.mucharuina.com
---------
Desde El Ejido, en Almería, usuario registrado Linux #294013
http://www.counter.li.org
# xorg.conf (Xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
# md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum
# dpkg-reconfigure xserver-xorg
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
# Modulos
ModulePath "/usr/lib/xorg/modules"
EndSection
Section "InputDevice"
Identifier "Teclado Mac"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "macintosh"
Option "XkbLayout" "es"
Option "XkbVariant" "dvorak"
Option "XkbOptions" "lv3:rwin_switch,apple:badmap"
EndSection
## A� bloque secci�esde el archivo de configuraci�el
## m�o de appletouch
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "auto-dev"
Option "LeftEdge" "0"
Option "RightEdge" "850"
Option "TopEdge" "0"
Option "BottomEdge" "645"
Option "MinSpeed" "0.4"
Option "MaxSpeed" "1"
Option "AccelFactor" "0.02"
Option "FingerLow" "5"
Option "FingerHigh" "30"
Option "MaxTapMove" "20"
Option "MaxTapTime" "100"
Option "HorizScrollDelta" "0"
Option "VertScrollDelta" "30"
Option "SHMConfig" "on"
# A� opci�e emulaci�e botones 2 y 3
# con toque de dedos. Desactivo el bot� con dedo
Option "TapButton1" "0"
Option "TapButton2" "2"
Option "TapButton3" "3"
# A� opci�ara evitar el desplazamiento con
# dos dedos y obligo a desplazar con un solo dedo
Option "VertEdgeScroll" "1"
Option "VertTwoFingerScroll" "0"
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV350 [Mobility Radeon 9600 M10]"
Driver "radeon"
BusID "PCI:0:16:0"
Option "DynamicClocks" "true"
Option "AGPMode" "4"
Option "AGPFastWrite" "true"
Option "UseFBDev" "false"
Option "DRI" "true"
Option "GARTSize" "64"
Option "AddARGBGLXVisuals" "true"
Option "XAANoOffscreenPixmaps"
Option "DisableGLXRootClipping" "true"
Option "AllowGLXWithComposite" "true"
Option "AccelMethod" "EXA"
Option "EnablePageFlip" "true"
EndSection
Section "Monitor"
Identifier "Monitor gen�co"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 [Mobility Radeon 9600 M10]"
Monitor "Monitor gen�co"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1440x900" "1200x800" "1024x768" "800x600" "640x480"
Virtual 3360 1080
EndSubSection
SubSection "Display"
Depth 4
Modes "1440x900" "1200x800" "1024x768" "800x600" "640x480"
Virtual 3360 1080
EndSubSection
SubSection "Display"
Depth 8
Modes "1440x900" "1200x800" "1024x768" "800x600" "640x480"
Virtual 3360 1080
EndSubSection
SubSection "Display"
Depth 15
Modes "1440x900" "1200x800" "1024x768" "800x600" "640x480"
Virtual 3360 1080
EndSubSection
SubSection "Display"
Depth 16
Modes "1440x900" "1200x800" "1024x768" "800x600" "640x480"
Virtual 3360 1080
EndSubSection
SubSection "Display"
Depth 24
Modes "1440x900" "1200x800" "1024x768" "800x600" "640x480"
Virtual 3360 1080
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Teclado Mac"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
[ 0.000000] Using PowerMac machine description
[ 0.000000] Total memory = 1024MB; using 2048kB for hash table (at cfe00000)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11-1-powerpc (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-1) ) #1 Debian 3.11.6-1 (2013-10-27)
[ 0.000000] Found initrd at 0xc1500000:0xc2252000
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
[ 0.000000] Mapped at 0xff7c0000
[ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000
[ 0.000000] Processor NAP mode on idle enabled.
[ 0.000000] PowerMac motherboard: PowerBook G4 17"
[ 0.000000] bootconsole [udbg0] enabled
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->1
[ 0.000000] PCI host bridge /pci@f0000000 ranges:
[ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.000000] MEM 0x00000000b0000000..0x00000000bfffffff -> 0x00000000b0000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->1
[ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges:
[ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
[ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000080000000..0x00000000afffffff -> 0x0000000080000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->1
[ 0.000000] PCI host bridge /pci@f4000000 ranges:
[ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
[ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=422, gen1=421
[ 0.000000] nvram: Active bank is: 0
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Top of RAM: 0x40000000, Total RAM: 0x40000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00000000-0x2fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x30000000-0x3fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x3fffffff]
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c062c798, node_mem_map c07cb000
[ 0.000000] DMA zone: 1536 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 196608 pages, LIFO batch:31
[ 0.000000] HighMem zone: 512 pages used for memmap
[ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260608
[ 0.000000] Kernel command line: root=/dev/mapper/Powerbook-raiz ro video=radeonfb:off radeon.modeset=1 radeon.agpmode=-1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 1015504K/1048576K available (4548K kernel code, 312K rwdata, 1252K rodata, 276K init, 1520K bss, 33072K reserved, 262144K highmem)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffcf000..0xfffff000 : fixmap
[ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs
[ 0.000000] * 0xfdde0000..0xff800000 : early ioremap
[ 0.000000] * 0xf1000000..0xfdde0000 : vmalloc & ioremap
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] mpic: Resetting
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 1 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off
[ 0.000000] time_init: decrementer frequency = 18.432000 MHz
[ 0.000000] time_init: processor frequency = 1666.666660 MHz
[ 0.000000] clocksource: timebase mult[3640e38e] shift[24] registered
[ 0.000000] clockevent: decrementer mult[4b7f5a5] shift[32] cpu[0]
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.001591] pid_max: default: 32768 minimum: 301
[ 0.001662] Security Framework initialized
[ 0.001689] AppArmor: AppArmor disabled by boot time parameter
[ 0.001699] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.001739] Mount-cache hash table entries: 512
[ 0.002126] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1"
[ 0.006644] Initializing cgroup subsys memory
[ 0.006697] Initializing cgroup subsys devices
[ 0.006708] Initializing cgroup subsys freezer
[ 0.006718] Initializing cgroup subsys net_cls
[ 0.006727] Initializing cgroup subsys blkio
[ 0.006737] Initializing cgroup subsys perf_event
[ 0.006965] MPC7450 family performance monitor hardware support registered
[ 0.007754] devtmpfs: initialized
[ 0.008542] NET: Registered protocol family 16
[ 0.009470] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 0.009489] channel 1 bus /uni-n@f8000000/i2c@f8001000/i2c-bus@1
[ 0.009501] channel 0 bus /uni-n@f8000000/i2c@f8001000/i2c-bus@0
[ 0.009558] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 0.009572] channel 0 bus /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0
[ 0.009595] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
[ 0.009609] channel 1 bus <multibus>
[ 0.009618] channel 2 bus <multibus>
[ 0.010391] PCI: Probing PCI hardware
[ 0.010483] PCI host bridge to bus 0000:00
[ 0.010507] pci_bus 0000:00: root bus resource [io 0x802000-0x1001fff] (bus address [0x0000-0x7fffff])
[ 0.010532] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff]
[ 0.010549] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xbfffffff]
[ 0.010568] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.010587] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.010623] pci 0000:00:0b.0: [106b:0034] type 00 class 0x060000
[ 0.010792] pci 0000:00:10.0: [1002:4e50] type 00 class 0x030000
[ 0.010815] pci 0000:00:10.0: reg 0x10: [mem 0xb8000000-0xbfffffff pref]
[ 0.010827] pci 0000:00:10.0: reg 0x14: [io 0x802400-0x8024ff]
[ 0.010840] pci 0000:00:10.0: reg 0x18: [mem 0xb0000000-0xb000ffff]
[ 0.010866] pci 0000:00:10.0: reg 0x30: [mem 0xb0020000-0xb003ffff pref]
[ 0.010904] pci 0000:00:10.0: supports D1 D2
[ 0.011026] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.011116] PCI host bridge to bus 0001:10
[ 0.011135] pci_bus 0001:10: root bus resource [io 0x0000-0x7fffff]
[ 0.011153] pci_bus 0001:10: root bus resource [mem 0xf3000000-0xf3ffffff]
[ 0.011170] pci_bus 0001:10: root bus resource [mem 0x80000000-0xafffffff]
[ 0.011188] pci_bus 0001:10: root bus resource [bus 10-ff]
[ 0.011204] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to ff
[ 0.011237] pci 0001:10:0b.0: [106b:0035] type 00 class 0x060000
[ 0.011374] pci 0001:10:12.0: [14e4:4320] type 00 class 0x028000
[ 0.011395] pci 0001:10:12.0: reg 0x10: [mem 0xa0006000-0xa0007fff]
[ 0.011461] pci 0001:10:12.0: supports D1 D2
[ 0.011468] pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.011576] pci 0001:10:13.0: [104c:ac56] type 02 class 0x060700
[ 0.011598] pci 0001:10:13.0: reg 0x10: [mem 0xa0005000-0xa0005fff]
[ 0.011632] pci 0001:10:13.0: supports D1 D2
[ 0.011639] pci 0001:10:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.011750] pci 0001:10:17.0: [106b:003e] type 00 class 0xff0000
[ 0.011767] pci 0001:10:17.0: reg 0x10: [mem 0x80000000-0x8007ffff]
[ 0.011897] pci 0001:10:19.0: [106b:003f] type 00 class 0x0c0310
[ 0.011915] pci 0001:10:19.0: reg 0x10: [mem 0xa0004000-0xa0004fff]
[ 0.012052] pci 0001:10:1a.0: [106b:003f] type 00 class 0x0c0310
[ 0.012071] pci 0001:10:1a.0: reg 0x10: [mem 0xa0003000-0xa0003fff]
[ 0.012206] pci 0001:10:1b.0: [1033:0035] type 00 class 0x0c0310
[ 0.012228] pci 0001:10:1b.0: reg 0x10: [mem 0xa0002000-0xa0002fff]
[ 0.012295] pci 0001:10:1b.0: supports D1 D2
[ 0.012301] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.012416] pci 0001:10:1b.1: [1033:0035] type 00 class 0x0c0310
[ 0.012437] pci 0001:10:1b.1: reg 0x10: [mem 0xa0001000-0xa0001fff]
[ 0.012528] pci 0001:10:1b.1: supports D1 D2
[ 0.012536] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.012675] pci 0001:10:1b.2: [1033:00e0] type 00 class 0x0c0320
[ 0.012697] pci 0001:10:1b.2: reg 0x10: [mem 0xa0000000-0xa00000ff]
[ 0.012765] pci 0001:10:1b.2: supports D1 D2
[ 0.012772] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.012990] pci 0001:10:13.0: Primary bus is hard wired to 0
[ 0.013011] pci 0001:10:13.0: bridge configuration invalid ([bus 01-01]), reconfiguring
[ 0.013123] pci_bus 0001:11: busn_res: [bus 11-ff] end is updated to 14
[ 0.013134] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to 14
[ 0.013215] PCI host bridge to bus 0002:24
[ 0.013235] pci_bus 0002:24: root bus resource [io 0xff7fe000-0xffffdfff] (bus address [0x0000-0x7fffff])
[ 0.013259] pci_bus 0002:24: root bus resource [mem 0xf5000000-0xf5ffffff]
[ 0.013277] pci_bus 0002:24: root bus resource [bus 24-ff]
[ 0.013293] pci_bus 0002:24: busn_res: [bus 24-ff] end is updated to ff
[ 0.013325] pci 0002:24:0b.0: [106b:0036] type 00 class 0x060000
[ 0.013443] pci 0002:24:0d.0: [106b:003b] type 00 class 0xff0000
[ 0.013458] pci 0002:24:0d.0: reg 0x10: [mem 0xf5004000-0xf5007fff]
[ 0.013583] pci 0002:24:0e.0: [106b:0031] type 00 class 0x0c0010
[ 0.013601] pci 0002:24:0e.0: reg 0x10: [mem 0xf5000000-0xf5000fff]
[ 0.013653] pci 0002:24:0e.0: supports D1 D2
[ 0.013660] pci 0002:24:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.013769] pci 0002:24:0f.0: [106b:0032] type 00 class 0x020000
[ 0.013785] pci 0002:24:0f.0: reg 0x10: [mem 0xf5200000-0xf53fffff]
[ 0.013819] pci 0002:24:0f.0: reg 0x30: [mem 0xf5100000-0xf51fffff pref]
[ 0.013974] pci_bus 0002:24: busn_res: [bus 24-ff] end is updated to 24
[ 0.014063] PCI 0000:00 Cannot reserve Legacy IO [io 0x802000-0x802fff]
[ 0.014105] pci 0001:10:13.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.014113] pci 0001:10:13.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.014121] pci 0001:10:13.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.014129] pci 0001:10:13.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.014142] pci 0001:10:13.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[ 0.014168] pci 0001:10:13.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[ 0.014186] pci 0001:10:13.0: BAR 13: assigned [io 0x1000-0x10ff]
[ 0.014203] pci 0001:10:13.0: BAR 14: assigned [io 0x1100-0x11ff]
[ 0.014222] pci 0001:10:13.0: CardBus bridge to [bus 11-14]
[ 0.014238] pci 0001:10:13.0: bridge window [io 0x1000-0x10ff]
[ 0.014256] pci 0001:10:13.0: bridge window [io 0x1100-0x11ff]
[ 0.014274] pci 0001:10:13.0: bridge window [mem 0x84000000-0x87ffffff pref]
[ 0.014297] pci 0001:10:13.0: bridge window [mem 0x88000000-0x8bffffff]
[ 0.014329] pci_bus 0000:00: resource 4 [io 0x802000-0x1001fff]
[ 0.014336] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
[ 0.014344] pci_bus 0000:00: resource 6 [mem 0xb0000000-0xbfffffff]
[ 0.014351] pci_bus 0001:10: resource 4 [io 0x0000-0x7fffff]
[ 0.014358] pci_bus 0001:10: resource 5 [mem 0xf3000000-0xf3ffffff]
[ 0.014365] pci_bus 0001:10: resource 6 [mem 0x80000000-0xafffffff]
[ 0.014373] pci_bus 0001:11: resource 0 [io 0x1000-0x10ff]
[ 0.014380] pci_bus 0001:11: resource 1 [io 0x1100-0x11ff]
[ 0.014387] pci_bus 0001:11: resource 2 [mem 0x84000000-0x87ffffff pref]
[ 0.014395] pci_bus 0001:11: resource 3 [mem 0x88000000-0x8bffffff]
[ 0.014402] pci_bus 0002:24: resource 4 [io 0xff7fe000-0xffffdfff]
[ 0.014409] pci_bus 0002:24: resource 5 [mem 0xf5000000-0xf5ffffff]
[ 0.016405] bio: create slab <bio-0> at 0
[ 0.016753] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none
[ 0.016786] vgaarb: loaded
[ 0.016796] vgaarb: bridge control possible 0000:00:10.0
[ 0.017036] SCSI subsystem initialized
[ 0.017149] libata version 3.00 loaded.
[ 0.017575] Switched to clocksource timebase
[ 0.026573] NET: Registered protocol family 2
[ 0.027043] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.027191] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.027272] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.027416] TCP: reno registered
[ 0.027434] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.027466] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.027624] NET: Registered protocol family 1
[ 0.027723] pci 0001:10:19.0: enabling device (0000 -> 0002)
[ 0.081628] pci 0001:10:1a.0: enabling device (0000 -> 0002)
[ 0.137599] pci 0001:10:1b.0: enabling device (0000 -> 0002)
[ 0.193597] pci 0001:10:1b.1: enabling device (0000 -> 0002)
[ 0.249596] pci 0001:10:1b.2: enabling device (0004 -> 0006)
[ 0.249640] PCI: CLS mismatch (32 != 1020), using 32 bytes
[ 0.249766] Unpacking initramfs...
[ 0.952472] Freeing initrd memory: 13640K (c1500000 - c2252000)
[ 0.952833] Thermal assist unit not available
[ 0.953505] audit: initializing netlink socket (disabled)
[ 0.953554] type=2000 audit(1383305902.948:1): initialized
[ 0.987946] bounce pool size: 64 pages
[ 0.988127] VFS: Disk quotas dquot_6.5.2
[ 0.988168] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.988296] msgmni has been set to 1500
[ 0.988909] alg: No test for stdrng (krng)
[ 0.988979] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.989063] io scheduler noop registered
[ 0.989077] io scheduler deadline registered
[ 0.989099] io scheduler cfq registered (default)
[ 0.989719] Using unsupported 1440x900 ATY,Jasper_A at b8008000, depth=8, pitch=1536
[ 1.015473] Console: switching to colour frame buffer device 180x56
[ 1.040874] fb0: Open Firmware frame buffer device on /pci@f0000000/ATY,JasperParent@10/ATY,Jasper_A@0
[ 1.041208] Using unsupported 1920x1080 ATY,Jasper_B at bc008000, depth=8, pitch=2048
[ 1.041511] checking generic (b8008000 151800) vs hw (bc008000 21c000)
[ 1.041646] fb1: Open Firmware frame buffer device on /pci@f0000000/ATY,JasperParent@10/ATY,Jasper_B@1
[ 1.042039] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.042882] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[ 1.043138] Serial: MPC52xx PSC UART driver
[ 1.043351] Generic non-volatile memory driver v1.1
[ 1.043574] Linux agpgart interface v0.103
[ 1.043732] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
[ 1.045012] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64
[ 1.045308] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0
[ 1.045636] MacIO PCI driver attached to Intrepid chipset
[ 1.046704] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
[ 1.047241] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
[ 1.048123] pata-pci-macio 0002:24:0d.0: enabling device (0000 -> 0002)
[ 1.048451] adb: starting probe task...
[ 1.048577] adb: finished probe task...
[ 1.061609] pata-pci-macio 0002:24:0d.0: Activating pata-macio chipset UniNorth ATA-6, Apple bus ID 3
[ 1.062312] scsi0 : pata_macio
[ 1.062552] ata1: PATA max UDMA/100 irq 39
[ 1.260184] ata1.00: ATA-8: WDC WD2500BEVE-00A0HT0, 11.01A11, max UDMA/100
[ 1.260402] ata1.00: 488397168 sectors, multi 16: LBA48
[ 1.274119] ata1.00: configured for UDMA/100
[ 1.274532] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVE-0 11.0 PQ: 0 ANSI: 5
[ 2.081604] pata-macio 0.00020000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0
[ 2.082323] scsi1 : pata_macio
[ 2.082541] ata2: PATA max MWDMA2 irq 24
[ 2.082940] mousedev: PS/2 mouse device common for all mice
[ 2.083463] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 2.083731] Registering PowerMac CPU frequency driver
[ 2.083887] Low: 833 Mhz, High: 1666 Mhz, Boot: 833 Mhz
[ 2.097820] TCP: cubic registered
[ 2.105088] NET: Registered protocol family 10
[ 2.112611] mip6: Mobile IPv6
[ 2.119902] NET: Registered protocol family 17
[ 2.127284] mpls_gso: MPLS GSO support
[ 2.134937] PM: Hibernation image not present or could not be loaded.
[ 2.134971] registered taskstats version 1
[ 2.142854] input: PMU as /devices/virtual/input/input0
[ 2.150717] rtc-generic rtc-generic: setting system clock to 2013-11-01 11:38:24 UTC (1383305904)
[ 2.253965] ata2.00: ATAPI: MATSHITADVD-R UJ-845E, DMP2, max UDMA/66
[ 2.277918] ata2.00: configured for MWDMA2
[ 2.290109] scsi 1:0:0:0: CD-ROM MATSHITA DVD-R UJ-845E DMP2 PQ: 0 ANSI: 5
[ 2.298504] Freeing unused kernel memory: 276K (c05ae000 - c05f3000)
[ 2.433980] systemd-udevd[53]: starting version 204
[ 2.553009] b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006)
[ 2.572752] usbcore: registered new interface driver usbfs
[ 2.643959] sungem.c:v1.0 David S. Miller <davem@redhat.com>
[ 2.652419] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.660514] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 2.668615] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.679864] ssb: Found chip with id 0x4306, rev 0x03 and package 0x00
[ 2.688201] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
[ 2.688207] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
[ 2.688212] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
[ 2.688218] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
[ 2.688223] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
[ 2.697922] usbcore: registered new interface driver hub
[ 2.707998] sd 0:0:0:0: [sda] Write Protect is off
[ 2.716183] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.725005] gem 0002:24:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:14:51:0a:53:0c
[ 2.740811] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0
[ 2.756588] usbcore: registered new device driver usb
[ 2.765113] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.774043] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.775629] firewire_ohci 0002:24:0e.0: enabling device (0000 -> 0002)
[ 2.793542] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.809363] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.819570] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.828879] ehci-pci: EHCI PCI platform driver
[ 2.842620] ehci-pci 0001:10:1b.2: EHCI Host Controller
[ 2.850829] ehci-pci 0001:10:1b.2: new USB bus registered, assigned bus number 1
[ 2.859380] ehci-pci 0001:10:1b.2: irq 63, io mem 0xa0000000
[ 2.867709] sda: [mac] sda1 sda2 sda3 sda4 sda5
[ 2.877242] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.885381] firewire_ohci 0002:24:0e.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 2.893892] ehci-pci 0001:10:1b.2: USB 2.0 started, EHCI 1.00
[ 2.916982] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.925375] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.933767] usb usb1: Product: EHCI Host Controller
[ 2.942027] usb usb1: Manufacturer: Linux 3.11-1-powerpc ehci_hcd
[ 2.950226] usb usb1: SerialNumber: 0001:10:1b.2
[ 2.960501] hub 1-0:1.0: USB hub found
[ 2.970141] hub 1-0:1.0: 5 ports detected
[ 3.223363] device-mapper: uevent: version 1.0.3
[ 3.232346] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 3.297119] bio: create slab <bio-1> at 1
[ 3.305496] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 3.393778] firewire_core 0002:24:0e.0: created device fw0: GUID 001451fffe0a530c, S800
[ 3.458888] usb 1-2: New USB device found, idVendor=058f, idProduct=6254
[ 3.458891] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.460181] hub 1-2:1.0: USB hub found
[ 3.460461] hub 1-2:1.0: 4 ports detected
[ 3.509877] JFS: nTxBlock = 8050, nTxLock = 64402
[ 3.750653] usb 1-2.4: new high-speed USB device number 3 using ehci-pci
[ 3.867763] usb 1-2.4: New USB device found, idVendor=058f, idProduct=6366
[ 3.876296] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.884719] usb 1-2.4: Product: Mass Storage Device
[ 3.892991] usb 1-2.4: Manufacturer: Generic
[ 3.901201] usb 1-2.4: SerialNumber: 058F63666471
[ 5.625920] systemd-udevd[275]: starting version 204
[ 6.727288] yenta_cardbus 0001:10:13.0: CardBus bridge found [0000:0000]
[ 6.735578] yenta_cardbus 0001:10:13.0: Enabling burst memory read transactions
[ 6.743895] yenta_cardbus 0001:10:13.0: Using CSCINT to route CSC interrupts to PCI
[ 6.752180] yenta_cardbus 0001:10:13.0: Routing CardBus interrupts to PCI
[ 6.760440] yenta_cardbus 0001:10:13.0: TI: mfunc 0x00001002, devctl 0x60
[ 6.873637] yenta_cardbus 0001:10:13.0: ISA IRQ mask 0x0000, PCI irq 53
[ 6.881856] yenta_cardbus 0001:10:13.0: Socket status: 30000087
[ 6.890464] yenta_cardbus 0001:10:13.0: pcmcia: parent PCI bridge window: [io 0x0000-0x7fffff]
[ 6.899359] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.908893] yenta_cardbus 0001:10:13.0: pcmcia: parent PCI bridge window: [mem 0xf3000000-0xf3ffffff]
[ 6.918608] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf3000000-0xf3ffffff:
[ 6.926710] clean.
[ 6.934731] yenta_cardbus 0001:10:13.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0xafffffff]
[ 6.942997] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0xafffffff:
[ 6.952950] excluding 0x80000000-0x807fffff 0x84000000-0x8bffffff 0xa0000000-0xa07fffff
[ 7.239765] ohci-pci: OHCI PCI platform driver
[ 7.249223] ohci-pci 0001:10:19.0: OHCI PCI host controller
[ 7.260582] usb-storage 1-2.4:1.0: USB Mass Storage device detected
[ 7.269366] ohci-pci 0001:10:19.0: new USB bus registered, assigned bus number 2
[ 7.277905] ohci-pci 0001:10:19.0: irq 28, io mem 0xa0004000
[ 7.286401] scsi2 : usb-storage 1-2.4:1.0
[ 7.296989] usbcore: registered new interface driver usb-storage
[ 7.363130] [drm] Initialized drm 1.1.0 20060810
[ 7.371454] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.379787] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.388104] usb usb2: Product: OHCI PCI host controller
[ 7.396411] usb usb2: Manufacturer: Linux 3.11-1-powerpc ohci_hcd
[ 7.404804] usb usb2: SerialNumber: 0001:10:19.0
[ 7.415121] hub 2-0:1.0: USB hub found
[ 7.423523] hub 2-0:1.0: 2 ports detected
[ 7.438641] ohci-pci 0001:10:1a.0: OHCI PCI host controller
[ 7.446736] ohci-pci 0001:10:1a.0: new USB bus registered, assigned bus number 3
[ 7.455094] ohci-pci 0001:10:1a.0: irq 29, io mem 0xa0003000
[ 7.540499] cfg80211: Calling CRDA to update world regulatory domain
[ 7.548829] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.556718] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.564563] usb usb3: Product: OHCI PCI host controller
[ 7.572310] usb usb3: Manufacturer: Linux 3.11-1-powerpc ohci_hcd
[ 7.580084] usb usb3: SerialNumber: 0001:10:1a.0
[ 7.590545] hub 3-0:1.0: USB hub found
[ 7.598358] hub 3-0:1.0: 2 ports detected
[ 7.606498] ohci-pci 0001:10:1b.0: OHCI PCI host controller
[ 7.614640] ohci-pci 0001:10:1b.0: new USB bus registered, assigned bus number 4
[ 7.623860] ohci-pci 0001:10:1b.0: irq 63, io mem 0xa0002000
[ 7.735548] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.743568] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.751367] usb usb4: Product: OHCI PCI host controller
[ 7.759187] usb usb4: Manufacturer: Linux 3.11-1-powerpc ohci_hcd
[ 7.766955] usb usb4: SerialNumber: 0001:10:1b.0
[ 7.849444] hub 4-0:1.0: USB hub found
[ 7.867136] hub 4-0:1.0: 3 ports detected
[ 7.875435] ohci-pci 0001:10:1b.1: OHCI PCI host controller
[ 7.884192] ohci-pci 0001:10:1b.1: new USB bus registered, assigned bus number 5
[ 7.895420] ohci-pci 0001:10:1b.1: irq 63, io mem 0xa0001000
[ 7.945625] usb 3-1: new full-speed USB device number 2 using ohci-pci
[ 7.977296] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.985091] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.992650] usb usb5: Product: OHCI PCI host controller
[ 8.000124] usb usb5: Manufacturer: Linux 3.11-1-powerpc ohci_hcd
[ 8.007626] usb usb5: SerialNumber: 0001:10:1b.1
[ 8.050546] hub 5-0:1.0: USB hub found
[ 8.058229] hub 5-0:1.0: 2 ports detected
[ 8.105769] [drm] radeon kernel modesetting enabled.
[ 8.118917] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x80ffffff:
[ 8.130070] excluding 0x80000000-0x800fffff
[ 8.138205] checking generic (b8008000 151800) vs hw (b8000000 8000000)
[ 8.138214] fb: conflicting fb hw usage radeondrmfb vs OFfb ATY,Jasper - removing generic driver
[ 8.146810] Console: switching to colour dummy device 80x25
[ 8.148001] checking generic (bc008000 21c000) vs hw (b8000000 8000000)
[ 8.148009] fb: conflicting fb hw usage radeondrmfb vs OFfb ATY,Jasper - removing generic driver
[ 8.148741] radeon 0000:00:10.0: enabling device (0006 -> 0007)
[ 8.149195] [drm] initializing kernel modesetting (RV350 0x1002:0x4E50 0x1002:0x4E50).
[ 8.149215] [drm] Forcing AGP to PCI mode
[ 8.149229] [drm] register mmio base: 0xB0000000
[ 8.149235] [drm] register mmio size: 65536
[ 8.149290] radeon 0000:00:10.0: Invalid ROM contents
[ 8.149310] radeon 0000:00:10.0: Invalid ROM contents
[ 8.149321] [drm:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
[ 8.149340] [drm] Using device-tree clock info
[ 8.149349] [drm] Generation 2 PCI interface, using max accessible memory
[ 8.149361] radeon 0000:00:10.0: VRAM: 128M 0x00000000B8000000 - 0x00000000BFFFFFFF (128M used)
[ 8.149374] radeon 0000:00:10.0: GTT: 512M 0x0000000098000000 - 0x00000000B7FFFFFF
[ 8.149396] [drm] Detected VRAM RAM=128M, BAR=128M
[ 8.149403] [drm] RAM width 128bits DDR
[ 8.153822] [TTM] Zone kernel: Available graphics memory: 384148 kiB
[ 8.153848] [TTM] Zone highmem: Available graphics memory: 515220 kiB
[ 8.153855] [TTM] Initializing pool allocator
[ 8.153919] [drm] radeon: 128M of VRAM memory ready
[ 8.153927] [drm] radeon: 512M of GTT memory ready.
[ 8.153974] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 8.157001] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 8.159491] [drm] PCI GART of 512M enabled (table at 0x0000000001F00000).
[ 8.159626] radeon 0000:00:10.0: WB enabled
[ 8.159647] radeon 0000:00:10.0: fence driver on ring 0 use gpu addr 0x0000000098000000 and cpu addr 0xc1ded000
[ 8.159664] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.159671] [drm] Driver supports precise vblank timestamp query.
[ 8.159715] [drm] radeon: irq initialized.
[ 8.159750] [drm] Loading R300 Microcode
[ 8.217694] usb 3-1: New USB device found, idVendor=05ac, idProduct=1000
[ 8.217722] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.295469] scsi 2:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
[ 8.297813] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 8.301329] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 8.349649] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
[ 8.353602] usb 3-2: new full-speed USB device number 3 using ohci-pci
[ 8.379417] b43-phy0: Found PHY: Analog 2, Type 2 (G), Revision 2
[ 8.401648] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 8.404940] radeon 0000:00:10.0: firmware: agent loaded radeon/R300_cp.bin into memory
[ 8.405241] [drm] radeon: ring at 0x0000000098001000
[ 8.405280] [drm] ring test succeeded in 3 usecs
[ 8.405492] [drm] ib test succeeded in 0 usecs
[ 8.405953] [drm] Connector Table: 3 (powerbook external tmds)
[ 8.405970] [drm] No panel info found in BIOS
[ 8.405983] [drm] Panel info derived from registers
[ 8.405990] [drm] Panel Size 1440x900
[ 8.406169] [drm] No valid Ext TMDS info found in BIOS
[ 8.406312] [drm] No TV DAC info found in BIOS
[ 8.797191] [drm] radeon legacy LVDS backlight initialized
[ 8.797204] [drm] Radeon Display Connectors
[ 8.797210] [drm] Connector 0:
[ 8.797217] [drm] LVDS-1
[ 8.797224] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 8.797231] [drm] Encoders:
[ 8.797237] [drm] LCD1: INTERNAL_LVDS
[ 8.797243] [drm] Connector 1:
[ 8.797249] [drm] DVI-I-1
[ 8.797254] [drm] HPD2
[ 8.797261] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 8.797267] [drm] Encoders:
[ 8.797273] [drm] DFP2: INTERNAL_DVO1
[ 8.797279] [drm] CRT1: INTERNAL_DAC1
[ 8.797284] [drm] Connector 2:
[ 8.797290] [drm] SVIDEO-1
[ 8.797295] [drm] Encoders:
[ 8.797300] [drm] TV1: INTERNAL_DAC2
[ 9.315867] [drm] fb mappable at 0xB8040000
[ 9.315895] [drm] vram apper at 0xB8000000
[ 9.315901] [drm] size 8294400
[ 9.315906] [drm] fb depth is 24
[ 9.315912] [drm] pitch is 7680
[ 10.003126] b43 ssb0:0: firmware: agent loaded b43/ucode5.fw into memory
[ 10.006872] Console: switching to colour frame buffer device 180x56
[ 10.007170] b43 ssb0:0: firmware: agent loaded b43/pcm5.fw into memory
[ 10.045319] radeon 0000:00:10.0: fb0: radeondrmfb frame buffer device
[ 10.045602] radeon 0000:00:10.0: registered panic notifier
[ 10.045978] [drm] Initialized radeon 2.34.0 20080528 for 0000:00:10.0 on minor 0
[ 10.046577] b43 ssb0:0: firmware: agent loaded b43/b0g0initvals5.fw into memory
[ 10.048210] b43 ssb0:0: firmware: agent loaded b43/b0g0bsinitvals5.fw into memory
[ 10.074655] usb 3-2: New USB device found, idVendor=05ac, idProduct=020f
[ 10.074973] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.075279] usb 3-2: Product: Apple Internal Keyboard/Trackpad
[ 10.075534] usb 3-2: Manufacturer: Apple Computer
[ 10.130394] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.161337] hidraw: raw HID events driver (C) Jiri Kosina
[ 10.261790] usbcore: registered new interface driver usbhid
[ 10.262069] usbhid: USB HID core driver
[ 10.270644] input: appletouch as /devices/pci0001:10/0001:10:1a.0/usb3/3-2/3-2:1.1/input/input1
[ 10.272136] usbcore: registered new interface driver appletouch
[ 10.409123] input: Apple Computer Apple Internal Keyboard/Trackpad as /devices/pci0001:10/0001:10:1a.0/usb3/3-2/3-2:1.0/input/input2
[ 10.411049] usb 3-1: USB disconnect, device number 2
[ 10.411745] usb 3-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -108
[ 10.415395] apple 0003:05AC:020F.0003: input,hidraw0: USB HID v1.10 Keyboard [Apple Computer Apple Internal Keyboard/Trackpad] on usb-0001:10:1a.0-2/input0
[ 10.421628] input: Apple Computer Apple Internal Keyboard/Trackpad as /devices/pci0001:10/0001:10:1a.0/usb3/3-2/3-2:1.2/input/input3
[ 10.422561] apple 0003:05AC:020F.0004: input,hidraw1: USB HID v1.10 Device [Apple Computer Apple Internal Keyboard/Trackpad] on usb-0001:10:1a.0-2/input2
[ 10.785612] usb 3-1: new full-speed USB device number 4 using ohci-pci
[ 11.163684] usb 3-1: New USB device found, idVendor=05ac, idProduct=8205
[ 11.164007] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 11.284072] Bluetooth: Core ver 2.16
[ 11.284306] NET: Registered protocol family 31
[ 11.284512] Bluetooth: HCI device and connection manager initialized
[ 11.285134] Bluetooth: HCI socket layer initialized
[ 11.285356] Bluetooth: L2CAP socket layer initialized
[ 11.313643] Bluetooth: SCO socket layer initialized
[ 11.367602] usbcore: registered new interface driver btusb
[ 13.355367] fuse init (API version 7.22)
[ 13.479279] loop: module loaded
[ 13.624833] PowerMac i2c bus pmu 2 registered
[ 13.638788] PowerMac i2c bus pmu 1 registered
[ 13.651838] PowerMac i2c bus mac-io 0 registered
[ 13.667243] PowerMac i2c bus uni-n 0 registered
[ 13.688377] PowerMac i2c bus uni-n 1 registered
[ 13.856983] ams: Found I2C based motion sensor
[ 13.883158] adt746x: version 1 (supported)
[ 13.894838] sensor 0: CPU/INTREPID BOTTOMSIDE
[ 13.906298] sensor 1: CPU BOTTOMSIDE
[ 13.917683] sensor 2: PWR SUPPLY BOTTOMSIDE
[ 13.936593] adt746x: ADT7467 initializing
[ 13.954736] adt746x: Lowering max temperatures from 70, 70, 70 to 70, 50, 70
[ 14.003289] snd-aoa-codec-onyx: created and attached onyx instance
[ 14.073964] snd-aoa-fabric-layout: Using PMF GPIOs
[ 14.077909] snd-aoa-fabric-layout: can use this codec
[ 14.116848] snd-aoa-codec-onyx: attached to onyx codec via i2c
[ 456.433200] Adding 2928636k swap on /dev/mapper/Powerbook-mem_intercambio. Priority:-1 extents:1 across:2928636k
[ 457.262545] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 457.264161] EXT4-fs (sda3): mounted filesystem without journal. Opts: (null)
[ 457.340026] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 457.458007] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 457.504547] XFS (dm-6): Mounting Filesystem
[ 457.757582] XFS (dm-6): Ending clean mount
[ 457.780073] XFS (dm-7): Mounting Filesystem
[ 458.164203] XFS (dm-7): Ending clean mount
[ 461.460129] RPC: Registered named UNIX socket transport module.
[ 461.460140] RPC: Registered udp transport module.
[ 461.460142] RPC: Registered tcp transport module.
[ 461.460144] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 461.485075] FS-Cache: Loaded
[ 461.549523] FS-Cache: Netfs 'nfs' registered for caching
[ 461.599039] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 464.569617] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[ 464.569750] DECnet: Routing cache hash table of 1024 buckets, 4Kbytes
[ 464.569765] NET: Registered protocol family 12
[ 464.705923] sungem_phy: PHY ID: 1410cc2, addr: 0
[ 464.705987] gem 0002:24:0f.0 eth0: Found Marvell 88E1111 PHY
[ 464.706308] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 467.113753] gem 0002:24:0f.0 eth0: Link is up at 100 Mbps, full-duplex
[ 467.113870] gem 0002:24:0f.0 eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
[ 467.113920] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 468.856629] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 468.856641] Bluetooth: BNEP filters: protocol multicast
[ 468.856662] Bluetooth: BNEP socket layer initialized
[ 470.068689] lp: driver loaded but no devices found
[ 471.834656] appletouch 3-2:1.1: appletouch: 17" model detected.
[ 519.851354] postgres (5879): /proc/5879/oom_adj is deprecated, please use /proc/5879/oom_score_adj instead.
[21235.746322] radeon 0000:00:10.0: GPU lockup CP stall for more than 10000msec
[21235.746340] radeon 0000:00:10.0: GPU lockup (waiting for 0x000000000002411e last fence id 0x000000000002411d)
[21235.890238] radeon: wait for empty RBBM fifo failed ! Bad things might happen.
[21236.033973] Failed to wait GUI idle while programming pipes. Bad things might happen.
[21236.040799] radeon 0000:00:10.0: Saved 91 dwords of commands on ring 0.
[21236.040825] radeon 0000:00:10.0: (r300_asic_reset:392) RBBM_STATUS=0x8400C137
[21236.534136] radeon 0000:00:10.0: (r300_asic_reset:411) RBBM_STATUS=0x8400C137
[21237.023433] radeon 0000:00:10.0: (r300_asic_reset:423) RBBM_STATUS=0x8400C137
[21237.023467] radeon 0000:00:10.0: failed to reset GPU
[21237.054394] Unable to handle kernel paging request for data at address 0x00000004
[21237.054408] Faulting instruction address: 0xf2807eac
[21237.250722] Oops: Kernel access of bad area, sig: 11 [#1]
[21237.251003] PowerMac
[21237.251119] Modules linked in: snd_hrtimer cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand cpufreq_conservative parport_pc lp parport bnep binfmt_misc decnet nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc xfs crc32c libcrc32c ext4 mbcache jbd2 sha256_generic cbc lm75 snd_aoa_i2sbus snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_aoa_fabric_layout snd_aoa_soundbus snd_aoa_codec_onyx snd_aoa snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device snd_timer snd soundcore ams therm_adt746x input_polldev i2c_powermac loop firewire_sbp2 fuse dm_crypt btusb bluetooth crc16 hid_generic hid_apple joydev appletouch usbhid hid arc4 b43 radeon bcma mac80211 evdev cfg80211 ttm rfkill drm_kms_helper rng_core drm usb_storage ohci_pci ohci_hcd yenta_socket pcmcia_rsrc jfs dm_mod ehci_pci ehci_hcd sg firewire_ohci sd_mod crc_t10dif sungem sungem_phy firewire_core crc_itu_t sr_mod cdrom usbcore ssb usb_common mmc_core pcmcia pcmcia_core
[21237.256233] CPU: 0 PID: 4596 Comm: X Not tainted 3.11-1-powerpc #1 Debian 3.11.6-1
[21237.256611] task: c1dd4ff0 ti: ef206000 task.ti: ef206000
[21237.256881] NIP: f2807eac LR: f2807e7c CTR: 00000000
[21237.257124] REGS: ef207c90 TRAP: 0300 Not tainted (3.11-1-powerpc Debian 3.11.6-1)
[21237.257506] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 24000882 XER: 20000000
[21237.257911] DAR: 00000004, DSISR: 40000000
[21237.258114]
[21237.258114] GPR00: f2807e7c ef207d40 c1dd4ff0 00000001 ea599600 00000000 00001350 00000000
[21237.258114] GPR08: 00000000 00000000 00000000 00001032 24000824 20620978 21a9bd30 bfcd8a08
[21237.258114] GPR16: 00032a00 20662cd8 f27d65a8 f2897680 f2897538 00000000 ef9d6e30 ef9d600c
[21237.258114] GPR24: ef9d68e8 00000001 ef207d94 00000000 ef207d7c ef207d7c ef9d7314 ef9d6000
[21237.259992] NIP [f2807eac] radeon_pm_resume+0xa8/0x2a0 [radeon]
[21237.260337] LR [f2807e7c] radeon_pm_resume+0x78/0x2a0 [radeon]
[21237.260623] Call Trace:
[21237.260796] [ef207d40] [f2807e7c] radeon_pm_resume+0x78/0x2a0 [radeon] (unreliable)
[21237.261219] [ef207d60] [f27ab3e0] radeon_gpu_reset+0x130/0x254 [radeon]
[21237.261596] [ef207dd0] [f27d5b6c] radeon_gem_handle_lockup.part.7+0x10/0x30 [radeon]
[21237.262004] [ef207de0] [f1a74e08] drm_ioctl+0x3d4/0x4a8 [drm]
[21237.262298] [ef207eb0] [c0137140] do_vfs_ioctl+0x464/0x6bc
[21237.262574] [ef207f10] [c013741c] SyS_ioctl+0x84/0x90
[21237.262833] [ef207f40] [c001439c] ret_from_syscall+0x0/0x40
[21237.263127] --- Exception: c01 at 0x1ff1ea68
[21237.263127] LR = 0x1ff1e9d0
[21237.263482] Instruction dump:
[21237.263641] 815f1384 38e00000 811f1394 813f1398 911f1388 913f138c 55492834 915f1374
[21237.264104] 90ff1378 811f136c 7d284a14 811f13a4 <81490004> 2f880001 a14a0020 b15f1390
[21237.345481] ---[ end trace a0949ab551ac0a25 ]---
[21237.345486]
[21238.249371] [drm:drm_release] *ERROR* Device busy: 1
Reply to: