Re: newest linux-image-3.0.0-1 doesn't recognize HD
Em Qui, 2011-08-18 às 15:57 -0400, Milan Kupcevic escreveu:
> On 08/18/2011 09:04 AM, Gunther Furtado wrote:
> > Hi,
> >
> > With the latest update, kernel doesn't recognize my HD (neither uuid
> > nor /dev/hdaX). When I boot into it, I get to an initramfs shell and
> > when I run
> >
> > ls /dev/
> >
> > there isn't anything that I could perceive as hd. I've read on the list
> > that the modules would be changed, is this it?
> >
> > Where else should I look?
> >
> > iMac G3
> > ATA device, with non-removable media
> > Model Number: Maxtor 93073U4
> > Serial Number: N417ABEC
> > Firmware Revision: BAC51JJ0
> >
> > The previous 3.0 version of the kernel booted without any noise.
> >
> > thanks,
> >
>
> When you get the shell try to type
>
> modprobe pata_macio
>
> then see if you have new stuff in /dev/
It sure does! Even disk-by-uuid.
>
> At least one ATA controller should work with this module. If you are
> lucky and your HD is connected to this controller then press ctrl+D and
> it will boot fine. Then do this:
>
> echo pata_macio >> /etc/initramfs-tools/modules
> update-initramfs -u
>
> Otherwise you will have to figure out which ATA controller you have in
> your machine and then determine which driver module will run it.
>
Thanks.
Everything is in place now!
>
> Milan
>
>
Reply to: