Hi, has anybody been successful on an iBook G4? motherboard : PowerBook6,5 MacRISC3 Power Macintosh detected as : 287 (iBook G4) I'm running debian sid and the ati driver from experimental (Version 1:6.7.192-4). I hope that is recent enough. According to the Xorg.0.log the Option 'MacModell' is recognized without warning. but the external monitor isn't. (II) RADEON(0): Output LVDS using monitor section Standardbildschirm (II) RADEON(0): I2C bus "DVI_DDC" initialized. (II) RADEON(0): Existing panel PLL dividers will be used. (WW) RADEON(0): Panel size 1024x768 is derived, this may not be correct. If not, use PanelSize option to overwrite this setting (WW) RADEON(0): No valid timing info from BIOS. (II) RADEON(0): Output VGA-0 has no monitor section (II) RADEON(0): I2C bus "VGA_DDC" initialized. (II) RADEON(0): Output S-video has no monitor section (II) RADEON(0): Port0: Monitor -- AUTO Connector -- Proprietary/LVDS DAC Type -- None TMDS Type -- None DDC Type -- DVI_DDC (II) RADEON(0): Port1: Monitor -- AUTO Connector -- VGA DAC Type -- TVDAC/ExtDAC TMDS Type -- None DDC Type -- VGA_DDC (II) RADEON(0): Port2: Monitor -- AUTO Connector -- STV DAC Type -- TVDAC/ExtDAC TMDS Type -- None DDC Type -- None (II) RADEON(0): I2C device "DVI_DDC:ddc2" registered at address 0xA0. (II) RADEON(0): DDC Type: 2, Detected Monitor Type: 2 (II) RADEON(0): EDID data from the display on connector: Proprietary/LVDS ---------------------- (II) RADEON(0): Manufacturer: APP Model: 9c40 Serial#: 0 (II) RADEON(0): Year: 2004 Week: 0 (II) RADEON(0): EDID Version: 1.3 (II) RADEON(0): Digital Display Input (II) RADEON(0): Max H-Image Size [cm]: horiz.: 29 vert.: 21 (II) RADEON(0): Gamma: 2.20 (II) RADEON(0): No DPMS capabilities specified; RGB/Color Display (II) RADEON(0): First detailed timing not preferred mode in violation of standard!(II) RADEON(0): redX: 0.565 redY: 0.325 greenX: 0.307 greenY: 0.560 (II) RADEON(0): blueX: 0.148 blueY: 0.132 whiteX: 0.313 whiteY: 0.329 (II) RADEON(0): Supported VESA Video Modes: (II) RADEON(0): 1024x768@60Hz (II) RADEON(0): Manufacturer's mask: 0 (II) RADEON(0): Supported additional Video Mode: (II) RADEON(0): clock: 65.0 MHz Image Size: 286 x 214 mm (II) RADEON(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0 (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0 (II) RADEON(0): QD14XL20 (II) RADEON(0): Monitor name: Color LCD (II) RADEON(0): EDID (in hex): (II) RADEON(0): 00ffffffffffff000610409c00000000 (II) RADEON(0): 000e0103801d157808d93590534e8f26 (II) RADEON(0): 21505400080001010101010101010101 (II) RADEON(0): 01010101010164190040410026301888 (II) RADEON(0): 36001ed6100000180000000100061020 (II) RADEON(0): 00000000000000000a20000000fe0051 (II) RADEON(0): 443134584c32300a20202020000000fc (II) RADEON(0): 00436f6c6f72204c43440a2020200078 finished output detect: 0 (II) RADEON(0): I2C device "VGA_DDC:ddc2" registered at address 0xA0. (II) RADEON(0): I2C device "VGA_DDC:ddc2" removed. (II) RADEON(0): I2C device "VGA_DDC:ddc2" registered at address 0xA0. (II) RADEON(0): I2C device "VGA_DDC:ddc2" removed. (II) RADEON(0): I2C device "VGA_DDC:ddc2" registered at address 0xA0. (II) RADEON(0): I2C device "VGA_DDC:ddc2" removed. (II) RADEON(0): DDC Type: 3, Detected Monitor Type: 0 finished output detect: 1 finished output detect: 2 finished all detect After some more messages this ends in (II) RADEON(0): Output LVDS connected (II) RADEON(0): Output VGA-0 disconnected (II) RADEON(0): Output S-video disconnected (II) RADEON(0): Output LVDS using initial mode 1024x768 I already bootet with the external monitor pluged in, but that doesn't make a difference. BTW: the updated ati driver scrambles the mouse pointer. It is shifted to on side by probably half the width. Uwe -- MMK GmbH, Fleyer Str. 196, 58097 Hagen Uwe.Steinmann@mmk-hagen.de Tel: 02331 840446 Fax: 02331 843920
Attachment:
signature.asc
Description: Digital signature