Re: G3 B/W fiber card blues
Are you running a 2.4 or 2.6 kernel? Sarge does have a 2.6 kernel avaiable I would try that first before anything else.
Ananda
On Wed, 31 Jan 2007 10:57:23 -0600
Dan Page <danmanfu@bradcowisp.com> wrote:
> Hello. I've just joined this list so I apologize if this issue has been
> addressed:
>
> I've installed Debian sarge on a Blue and white G3. This box is planned
> to be used as a DNS resolver for our network. I got DJB DNS set up and
> working like a champ, my problem lies in the network card. We use
> gigabit fiber for our core network and I chose this model because it has
> the 64 bit pci bus that most giga fiber cards use. I installed a Intel
> gigabit card installed. The e1000.0 module that this card requires is
> present in the kernel but for some reason it doesn't load. I don't know
> if its related but the drivers for the USB and Firewire don't load
> properly either. here is an except from the dmesg log
>
> ieee1394: SelfIDs failed monotony check with 22/0
> ieee1394: Error in SelfID stage, resetting
> pcilynx0: resetting bus (long bus reset) on request
> pcilynx0: bus reset interrupt
> pcilynx0: SelfID process finished (phyid 0, root)
> pcilynx0: SelfID packet 0x568c7f80 rcvd
> ieee1394: SelfIDs failed monotony check with 22/0
>
> this repeats about 50 times then:
>
> ieee1394: Stopping out-of-control reset loop
> ieee1394: Warning - topology map and speed map will not be valid
> pcilynx0: invalid transaction code
> ieee1394: got invalid ack 254 from node 65535 (tcode 4)
> ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
> ieee1394: Stopping reset loop for IRM sanity
>
>
> Thanks in advance for any insite.
>
> Dan
>
>
> --
> To UNSUBSCRIBE, email to debian-powerpc-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
Reply to: