Re: USB blocked under 2.6.18

To: debian-powerpc@lists.debian.org
Subject: Re: USB blocked under 2.6.18
From: leandro@dutra.fastmail.fm (Leandro Guimarães Faria Corcete DUTRA)
Date: Sun, 31 Dec 2006 12:03:54 -0200
Message-id: <[🔎] 877iw8b1rp.fsf@bege.exemplo.com>
References: <[🔎] 873b6yi8bu.fsf@bege.exemplo.com> <[🔎] 20061230132641.GB5395@powerlinux.fr>
Sven Luther <sven.luther@wanadoo.fr> writes:
> On Fri, Dec 29, 2006 at 09:35:49PM -0200, Leandro Guimarães Faria Corcete DUTRA wrote:
>> 	Under 2.6.18, I can’t use USB at all.  Be it print jobs, lsusb or any
>> other command, it just blocks forever.
>
> can you give more info about the problem ?

	If I know what to look for.

        Until 2.6.15 I had no problems.  2.6.16–17 didn’t boot at all for me.
With 2.6.18, I can boot but USB simply, silently blocks.

        I am on a beige G3 with an adapter card.  Under 2.6.15, normal
functioning:

leandro@bege:~$ uname -a
Linux bege 2.6.15-1-powerpc #2 Mon Mar 6 12:39:17 CET 2006 ppc GNU/Linux
leandro@bege:~$ lspci
00:00.0 Host bridge: Motorola MPC106 [Grackle] (rev 40)
00:0d.0 PCI bridge: Actiontec Electronics Inc Mini-PCI bridge (rev 11)
00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
00:10.0 Class ff00: Apple Computer Inc. Heathrow Mac I/O (rev 01)
00:12.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro 215GP (rev 5c)
01:0c.0 FireWire (IEEE 1394): NEC Corporation IEEE 1394 [OrangeLink] Host Controller (rev 01)
01:0d.0 USB Controller: OPTi Inc. 82C861 (rev 10)
leandro@bege:~$ lsusb
Bus 001 Device 006: ID 1606:0060 Umax [hex] Astra 3400U
Bus 001 Device 004: ID 056a:0010 Wacom Co., Ltd Graphire
Bus 001 Device 003: ID 04a9:1051 Canon, Inc. BJC-3000 Color Printer
Bus 001 Device 002: ID 03eb:3301 Atmel Corp. at43301 4-port Hub
Bus 001 Device 001: ID 0000:0000  
leandro@bege:~$ 


> And also provide output of dmesg

mem_pieces_remove: [342000,9201d0) not in any region
Total memory = 288MB; using 1024kB for hash table (at c0a00000)
Linux version 2.6.15-1-powerpc (Debian 2.6.15-8) (waldi@debian.org) (gcc version 4.0.3 20060304 (prerelease) (Debian 4.0.2-10)) #2 Mon Mar 6 12:39:17 CET 2006
Found a Heathrow mac-io controller, rev: 1, mapped at 0xfdebf000
PowerMac motherboard: PowerMac G3 (Gossamer)
Found Grackle (MPC106) PCI host bridge at 0x80000000. Firmware bus number: 0->1
nvram: OF partition at 0x1800
nvram: XP partition at 0x1300
nvram: NR partition at 0x1400
On node 0 totalpages: 73728
  DMA zone: 73728 pages, LIFO batch:15
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 0 pages, LIFO batch:0
  HighMem zone: 0 pages, LIFO batch:0
Built 1 zonelists
Kernel command line: ramdisk_size=8192 root=/dev/mapper/gv-raiz
System has 64 possible interrupts
PID hash table entries: 2048 (order: 11, 32768 bytes)
GMT Delta read from XPRAM: 0 minutes, DST: off
via_calibrate_decr: ticks per jiffy = 16708 (1002481 ticks)
Console: colour dummy device 80x25
serial8250_console_init: nothing to do on PowerMac
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 281600k available (2172k kernel code, 1008k data, 172k init, 0k highmem)
Calibrating delay loop... 465.92 BogoMIPS (lpj=232960)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
device-tree: property "l2-cache" name conflicts with node in /cpus/PowerPC,750
checking if image is initramfs... it is
Freeing initrd memory: 6008k freed
NET: Registered protocol family 16
PCI: Probing PCI hardware
PCI: Cannot allocate resource region 1 of device 0000:00:12.0
Registering pmac pic with sysfs...
Thermal assist unit using timers, shrink_timer: 2000 jiffies
audit: initializing netlink socket (disabled)
audit(3873841477.432:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
PCI: Enabling device 0000:00:12.0 (0086 -> 0087)
atyfb: using auxiliary register aperture
atyfb: 3D RAGE PRO (Mach64 GP, PQFP, PCI) [0x4750 rev 0x7c]
atyfb: 2M SGRAM (1:1), 14.31818 MHz XTAL, 230 MHz PLL, 100 Mhz MCLK, 100 MHz XCLK
atyfb: monitor sense=717, mode 12
Console: switching to colour frame buffer device 80x30
atyfb: fb0: ATY Mach64 frame buffer device on PCI
MacOS display is /pci/ATY,mach64_3DUPro
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
serial8250_init: nothing to do on PowerMac
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
ttyS0 at MMIO 0xf3013020 (irq = 15) is a Z85c30 ESCC - Serial port
ttyS1 at MMIO 0xf3013000 (irq = 16) is a Z85c30 ESCC - Serial port
fd0: SWIM3 floppy controller 
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
MacIO PCI driver attached to Heathrow chipset
input: Macintosh mouse button emulation as /class/input/input0
Macintosh CUDA driver v0.5 for Unified ADB.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
adb: starting probe task...
adb devices: [2]: 2 2 [3]: 3 1
ADB keyboard at 2, handler set to 3
Detected ADB keyboard, type ANSI.
input: ADB keyboard as /class/input/input1
ADB mouse at 3, handler set to 4
input: ADB mouse as /class/input/input2
adb: finished probe task...
ide0: Found Apple Heathrow ATA controller, bus ID 0, irq 13
Probing IDE interface ide0...
hda: SAMSUNG SP0802N, ATA DISK drive
hda: Enabling MultiWord DMA 2
ide0 at 0xd3016000-0xd3016007,0xd3016160 on irq 13
ide1: Found Apple Heathrow ATA controller, bus ID 1, irq 14
Probing IDE interface ide1...
hdd: MATSHITA CR-587, ATAPI CD/DVD-ROM drive
hdd: Enabling MultiWord DMA 2
ide1 at 0xd301c000-0xd301c007,0xd301c160 on irq 14
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 172k init
usbcore: registered new driver usbfs
usbcore: registered new driver hub
hda: max request size: 1024KiB
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
PCI: Enabling device 0000:01:0d.0 (0014 -> 0016)
ohci_hcd 0000:01:0d.0: OHCI Host Controller
ohci_hcd 0000:01:0d.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:01:0d.0: irq 23, io mem 0x81800000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ieee1394: Initialized config rom entry `ip1394'
usb 1-1: new full speed USB device using ohci_hcd and address 2
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
  http://www.scyld.com/network/ne2k-pci.html
PCI: Enabling device 0000:00:0e.0 (0000 -> 0001)
eth0: RealTek RTL-8029 found at 0x1000, IRQ 24, 00:00:B4:97:E3:8B.
hdd: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
PCI: Enabling device 0000:01:0c.0 (0014 -> 0016)
ohci1394: fw-host0: Unexpected PCI resource length of 1000!
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[23]  MMIO=[81801000-818017ff]  Max Packet=[1024]
usb 1-1.2: new full speed USB device using ohci_hcd and address 3
usb 1-1.3: new low speed USB device using ohci_hcd and address 4
usb 1-1.4: new full speed USB device using ohci_hcd and address 5
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00d0f52000007a36]
hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63, (U)DMA
hda: cache flushes supported
 hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
cdrom: open failed.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1051
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
input: Wacom Graphire as /class/input/input3
usbcore: registered new driver wacom
drivers/usb/input/wacom.c: v1.44:USB Wacom Graphire and Wacom Intuos tablet driver
EXT3 FS on dm-1, internal journal
input: PowerMac Beep as /class/input/input4
eth1: BMAC at 00:05:02:ad:86:5a
pktgen v2.63: Packet Generator for packet performance testing.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1048568k swap on /dev/mapper/gv-swap.  Priority:-1 extents:1 across:1048568k
phy registers:
 0000 0000 0000 0000 0000 0000 0000 0000
 0000 0000 0000 0000 0000 0000 0000 0000
 0000 0000 0000 0000 0000 0000 0000 0000
 0000 0000 0000 0000 0000 0000 0000 0000


> and the content of /var/log/syslog ? Preferably the last lines after inserting
> an usb device.

Dec 30 07:50:23 localhost syslogd 1.4.1#20: restart.
Dec 30 07:51:26 localhost anacron[25223]: Job `cron.daily' terminated (exit status: 1) (mailing output)
Dec 30 07:51:29 localhost anacron[25223]: Normal exit (1 job run)
Dec 30 07:53:43 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 08:02:48 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 08:03:01 localhost /USR/SBIN/CRON[28011]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 08:09:19 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 08:09:54 localhost last message repeated 4 times
Dec 30 08:10:55 localhost last message repeated 8 times
Dec 30 08:11:07 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 08:16:37 localhost smartd[2196]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 118 to 121 
Dec 30 08:17:01 localhost /USR/SBIN/CRON[29085]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Dec 30 08:23:45 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 08:33:01 localhost /USR/SBIN/CRON[30242]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 08:53:46 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 09:03:02 localhost /USR/SBIN/CRON[32437]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 09:16:26 localhost -- MARK --
Dec 30 09:17:02 localhost /USR/SBIN/CRON[995]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Dec 30 09:23:48 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 09:33:01 localhost /USR/SBIN/CRON[2225]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 09:56:13 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 10:02:02 localhost /USR/SBIN/CRON[4446]: (root) CMD (if [ -x /usr/sbin/pg_maintenance ]; then /usr/sbin/pg_maintenance --analyze >/dev/null; fi)
Dec 30 10:03:01 localhost /USR/SBIN/CRON[4520]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 10:16:26 localhost -- MARK --
Dec 30 10:17:01 localhost /USR/SBIN/CRON[5539]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Dec 30 10:26:14 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 10:33:01 localhost /USR/SBIN/CRON[6698]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 10:46:37 localhost smartd[2196]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 121 to 118 
Dec 30 10:56:15 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 11:03:01 localhost /USR/SBIN/CRON[8880]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 11:16:27 localhost -- MARK --
Dec 30 11:17:01 localhost /USR/SBIN/CRON[9899]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Dec 30 11:26:16 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 11:33:01 localhost /USR/SBIN/CRON[11065]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 11:56:16 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 11:59:04 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 12:01:46 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 12:03:04 localhost /USR/SBIN/CRON[13272]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 12:08:29 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 12:09:16 localhost last message repeated 6 times
Dec 30 12:10:22 localhost last message repeated 8 times
Dec 30 12:11:21 localhost last message repeated 6 times
Dec 30 12:17:02 localhost /USR/SBIN/CRON[14361]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Dec 30 12:26:18 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 12:33:01 localhost /USR/SBIN/CRON[15517]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 12:56:21 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 13:03:01 localhost /USR/SBIN/CRON[17709]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 13:16:27 localhost -- MARK --
Dec 30 13:17:01 localhost /USR/SBIN/CRON[18732]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Dec 30 13:26:22 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 13:33:01 localhost /USR/SBIN/CRON[19899]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 13:56:23 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 14:03:01 localhost /USR/SBIN/CRON[22083]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 14:16:27 localhost -- MARK --
Dec 30 14:17:01 localhost /USR/SBIN/CRON[23105]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Dec 30 14:26:25 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 14:33:01 localhost /USR/SBIN/CRON[24271]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 14:46:37 localhost smartd[2196]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 118 to 115 
Dec 30 14:56:27 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 15:02:01 localhost /USR/SBIN/CRON[26415]: (root) CMD (if [ -x /usr/sbin/pg_maintenance ]; then /usr/sbin/pg_maintenance --analyze >/dev/null; fi)
Dec 30 15:03:02 localhost /USR/SBIN/CRON[26489]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 15:16:28 localhost -- MARK --
Dec 30 15:17:01 localhost /USR/SBIN/CRON[27510]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Dec 30 15:26:28 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 15:33:02 localhost /USR/SBIN/CRON[28676]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 15:56:28 localhost -- MARK --
Dec 30 15:56:30 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 16:03:02 localhost /USR/SBIN/CRON[30900]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 16:16:28 localhost -- MARK --
Dec 30 16:17:02 localhost /USR/SBIN/CRON[31920]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Dec 30 16:26:32 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 16:33:01 localhost /USR/SBIN/CRON[608]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 16:56:29 localhost -- MARK --
Dec 30 16:56:33 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 17:03:01 localhost /USR/SBIN/CRON[2884]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 17:16:29 localhost -- MARK --
Dec 30 17:17:01 localhost /USR/SBIN/CRON[3915]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Dec 30 17:26:34 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 17:33:04 localhost /USR/SBIN/CRON[5076]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 17:56:29 localhost -- MARK --
Dec 30 17:56:36 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 18:03:01 localhost /USR/SBIN/CRON[7245]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 18:16:30 localhost -- MARK --
Dec 30 18:17:01 localhost /USR/SBIN/CRON[8262]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Dec 30 18:26:38 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 18:33:01 localhost /USR/SBIN/CRON[9421]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 18:56:30 localhost -- MARK --
Dec 30 18:56:39 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 19:03:01 localhost /USR/SBIN/CRON[11589]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 19:16:30 localhost -- MARK --
Dec 30 19:17:02 localhost /USR/SBIN/CRON[12607]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Dec 30 19:26:40 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 19:33:01 localhost /USR/SBIN/CRON[13768]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 19:46:37 localhost smartd[2196]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 115 to 118 
Dec 30 19:56:41 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 20:02:02 localhost /USR/SBIN/CRON[15869]: (root) CMD (if [ -x /usr/sbin/pg_maintenance ]; then /usr/sbin/pg_maintenance --analyze >/dev/null; fi)
Dec 30 20:03:01 localhost /USR/SBIN/CRON[15942]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 20:16:31 localhost -- MARK --
Dec 30 20:17:02 localhost /USR/SBIN/CRON[16963]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Dec 30 20:27:39 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 20:33:01 localhost /USR/SBIN/CRON[18126]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 20:56:31 localhost -- MARK --
Dec 30 20:57:41 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 21:03:02 localhost /USR/SBIN/CRON[20370]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 21:13:30 localhost gconfd (root-21161): iniciando (versão 2.16.0), pid 21161 usuário 'root'
Dec 30 21:13:31 localhost gconfd (root-21161): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Dec 30 21:13:31 localhost gconfd (root-21161): O endereço "xml:readwrite:/root/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
Dec 30 21:13:31 localhost gconfd (root-21161): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 2
Dec 30 21:13:31 localhost gconfd (root-21161): Endereço "xml:readonly:/var/lib/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Dec 30 21:13:31 localhost gconfd (root-21161): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Dec 30 21:14:31 localhost gconfd (root-21161): O servidor GConf não está sendo usado, desligando.
Dec 30 21:14:32 localhost gconfd (root-21161): Terminando
Dec 30 21:15:44 localhost spamd[30887]: spamd: server killed by SIGTERM, shutting down 
Dec 30 21:16:40 localhost smartd[2196]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 118 to 115 
Dec 30 21:17:08 localhost /USR/SBIN/CRON[21468]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Dec 30 21:18:27 localhost gconfd (root-21609): iniciando (versão 2.16.0), pid 21609 usuário 'root'
Dec 30 21:18:28 localhost gconfd (root-21609): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Dec 30 21:18:28 localhost gconfd (root-21609): O endereço "xml:readwrite:/root/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
Dec 30 21:18:28 localhost gconfd (root-21609): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 2
Dec 30 21:18:28 localhost gconfd (root-21609): Endereço "xml:readonly:/var/lib/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Dec 30 21:18:28 localhost gconfd (root-21609): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Dec 30 21:18:58 localhost gconfd (root-21609): O servidor GConf não está sendo usado, desligando.
Dec 30 21:18:58 localhost gconfd (root-21609): Terminando
Dec 30 21:19:50 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 21:20:14 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 21:20:53 localhost gconfd (corcete-16848): Terminando
Dec 30 21:20:54 localhost gconfd (corcete-21802): iniciando (versão 2.16.0), pid 21802 usuário 'corcete'
Dec 30 21:20:57 localhost gconfd (corcete-21802): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Dec 30 21:20:57 localhost gconfd (corcete-21802): O endereço "xml:readwrite:/home/corcete/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
Dec 30 21:20:57 localhost gconfd (corcete-21802): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 2
Dec 30 21:20:57 localhost gconfd (corcete-21802): Endereço "xml:readonly:/var/lib/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Dec 30 21:20:57 localhost gconfd (corcete-21802): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Dec 30 21:20:58 localhost gconfd (corcete-21802): ID de ouvidor 4278190097 não existe
Dec 30 21:21:28 localhost gconfd (corcete-21802): O servidor GConf não está sendo usado, desligando.
Dec 30 21:21:28 localhost gconfd (corcete-21802): Terminando
Dec 30 21:22:55 localhost gconfd (root-21999): iniciando (versão 2.16.0), pid 21999 usuário 'root'
Dec 30 21:22:55 localhost gconfd (root-21999): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Dec 30 21:22:55 localhost gconfd (root-21999): O endereço "xml:readwrite:/root/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
Dec 30 21:22:55 localhost gconfd (root-21999): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 2
Dec 30 21:22:55 localhost gconfd (root-21999): Endereço "xml:readonly:/var/lib/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Dec 30 21:22:55 localhost gconfd (root-21999): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Dec 30 21:23:15 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 21:23:16 localhost last message repeated 2 times
Dec 30 21:23:26 localhost gconfd (root-21999): Terminando
Dec 30 21:23:56 localhost gconfd (leandro-2572): SIGHUP recebido, recarregando todos os bancos de dados
Dec 30 21:23:59 localhost gconfd (leandro-2572): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Dec 30 21:23:59 localhost gconfd (leandro-2572): O endereço "xml:readwrite:/home/leandro/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
Dec 30 21:23:59 localhost gconfd (leandro-2572): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 2
Dec 30 21:23:59 localhost gconfd (leandro-2572): Endereço "xml:readonly:/var/lib/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Dec 30 21:23:59 localhost gconfd (leandro-2572): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Dec 30 21:27:47 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 21:31:45 localhost gconfd (root-22498): iniciando (versão 2.16.0), pid 22498 usuário 'root'
Dec 30 21:31:46 localhost gconfd (root-22498): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Dec 30 21:31:46 localhost gconfd (root-22498): O endereço "xml:readwrite:/root/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
Dec 30 21:31:46 localhost gconfd (root-22498): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 2
Dec 30 21:31:46 localhost gconfd (root-22498): Endereço "xml:readonly:/var/lib/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Dec 30 21:31:46 localhost gconfd (root-22498): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Dec 30 21:32:16 localhost gconfd (root-22498): O servidor GConf não está sendo usado, desligando.
Dec 30 21:32:16 localhost gconfd (root-22498): Terminando
Dec 30 21:33:03 localhost /USR/SBIN/CRON[22560]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 21:38:01 localhost gconfd (leandro-2572): SIGHUP recebido, recarregando todos os bancos de dados
Dec 30 21:38:26 localhost gconfd (leandro-2572): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Dec 30 21:38:27 localhost gconfd (leandro-2572): O endereço "xml:readwrite:/home/leandro/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
Dec 30 21:38:27 localhost gconfd (leandro-2572): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 2
Dec 30 21:38:27 localhost gconfd (leandro-2572): Endereço "xml:readonly:/var/lib/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Dec 30 21:38:27 localhost gconfd (leandro-2572): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Dec 30 21:39:27 localhost gconfd (leandro-2572): SIGHUP recebido, recarregando todos os bancos de dados
Dec 30 21:39:28 localhost gconfd (leandro-2572): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Dec 30 21:39:28 localhost gconfd (leandro-2572): O endereço "xml:readwrite:/home/leandro/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
Dec 30 21:39:28 localhost gconfd (leandro-2572): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 2
Dec 30 21:39:28 localhost gconfd (leandro-2572): Endereço "xml:readonly:/var/lib/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Dec 30 21:39:28 localhost gconfd (leandro-2572): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Dec 30 21:45:52 localhost gconfd (root-23389): iniciando (versão 2.16.0), pid 23389 usuário 'root'
Dec 30 21:45:53 localhost gconfd (root-23389): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Dec 30 21:45:53 localhost gconfd (root-23389): O endereço "xml:readwrite:/root/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
Dec 30 21:45:53 localhost gconfd (root-23389): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 2
Dec 30 21:45:53 localhost gconfd (root-23389): Endereço "xml:readonly:/var/lib/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Dec 30 21:45:53 localhost gconfd (root-23389): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Dec 30 21:46:23 localhost gconfd (root-23389): O servidor GConf não está sendo usado, desligando.
Dec 30 21:46:23 localhost gconfd (root-23389): Terminando
Dec 30 21:46:38 localhost smartd[2196]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 115 to 112 
Dec 30 21:47:33 localhost gconfd (root-23508): iniciando (versão 2.16.0), pid 23508 usuário 'root'
Dec 30 21:47:33 localhost gconfd (root-23508): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Dec 30 21:47:33 localhost gconfd (root-23508): O endereço "xml:readwrite:/root/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
Dec 30 21:47:33 localhost gconfd (root-23508): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 2
Dec 30 21:47:33 localhost gconfd (root-23508): Endereço "xml:readonly:/var/lib/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Dec 30 21:47:33 localhost gconfd (root-23508): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Dec 30 21:48:03 localhost gconfd (root-23508): O servidor GConf não está sendo usado, desligando.
Dec 30 21:48:03 localhost gconfd (root-23508): Terminando
Dec 30 21:57:52 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 22:03:02 localhost /USR/SBIN/CRON[24660]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 22:16:33 localhost -- MARK --
Dec 30 22:16:38 localhost smartd[2196]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 112 to 115 
Dec 30 22:17:02 localhost /USR/SBIN/CRON[25213]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Dec 30 22:27:59 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 22:33:02 localhost /USR/SBIN/CRON[25837]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 22:36:42 localhost gconfd (root-25987): iniciando (versão 2.16.0), pid 25987 usuário 'root'
Dec 30 22:36:42 localhost gconfd (root-25987): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Dec 30 22:36:42 localhost gconfd (root-25987): O endereço "xml:readwrite:/root/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
Dec 30 22:36:42 localhost gconfd (root-25987): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 2
Dec 30 22:36:42 localhost gconfd (root-25987): Endereço "xml:readonly:/var/lib/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Dec 30 22:36:42 localhost gconfd (root-25987): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Dec 30 22:37:12 localhost gconfd (root-25987): O servidor GConf não está sendo usado, desligando.
Dec 30 22:37:12 localhost gconfd (root-25987): Terminando
Dec 30 22:38:06 localhost gconfd (root-26088): iniciando (versão 2.16.0), pid 26088 usuário 'root'
Dec 30 22:38:06 localhost gconfd (root-26088): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Dec 30 22:38:06 localhost gconfd (root-26088): O endereço "xml:readwrite:/root/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
Dec 30 22:38:06 localhost gconfd (root-26088): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 2
Dec 30 22:38:06 localhost gconfd (root-26088): Endereço "xml:readonly:/var/lib/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Dec 30 22:38:06 localhost gconfd (root-26088): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Dec 30 22:38:36 localhost gconfd (root-26088): SIGHUP recebido, recarregando todos os bancos de dados
Dec 30 22:38:36 localhost gconfd (root-26088): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Dec 30 22:38:36 localhost gconfd (root-26088): O endereço "xml:readwrite:/root/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
Dec 30 22:38:36 localhost gconfd (root-26088): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 2
Dec 30 22:38:36 localhost gconfd (root-26088): Endereço "xml:readonly:/var/lib/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Dec 30 22:38:36 localhost gconfd (root-26088): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Dec 30 22:38:36 localhost gconfd (root-26088): O servidor GConf não está sendo usado, desligando.
Dec 30 22:38:36 localhost gconfd (root-26088): Terminando
Dec 30 22:49:09 localhost gconfd (root-26883): iniciando (versão 2.16.0), pid 26883 usuário 'root'
Dec 30 22:49:09 localhost gconfd (root-26883): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Dec 30 22:49:09 localhost gconfd (root-26883): O endereço "xml:readwrite:/root/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
Dec 30 22:49:10 localhost gconfd (root-26883): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 2
Dec 30 22:49:10 localhost gconfd (root-26883): Endereço "xml:readonly:/var/lib/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Dec 30 22:49:10 localhost gconfd (root-26883): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Dec 30 22:49:40 localhost gconfd (root-26883): O servidor GConf não está sendo usado, desligando.
Dec 30 22:49:40 localhost gconfd (root-26883): Terminando
Dec 30 22:52:13 localhost gconfd (root-27054): iniciando (versão 2.16.0), pid 27054 usuário 'root'
Dec 30 22:52:13 localhost gconfd (root-27054): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Dec 30 22:52:13 localhost gconfd (root-27054): O endereço "xml:readwrite:/root/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
Dec 30 22:52:13 localhost gconfd (root-27054): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 2
Dec 30 22:52:13 localhost gconfd (root-27054): Endereço "xml:readonly:/var/lib/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Dec 30 22:52:13 localhost gconfd (root-27054): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Dec 30 22:52:43 localhost gconfd (root-27054): O servidor GConf não está sendo usado, desligando.
Dec 30 22:52:44 localhost gconfd (root-27054): Terminando
Dec 30 22:58:01 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 23:03:02 localhost /USR/SBIN/CRON[28914]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 23:16:35 localhost -- MARK --
Dec 30 23:17:01 localhost /USR/SBIN/CRON[29479]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Dec 30 23:24:22 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 23:26:52 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 23:28:02 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 30 23:33:01 localhost /USR/SBIN/CRON[30094]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 30 23:46:38 localhost smartd[2196]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 115 to 118 
Dec 30 23:58:03 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 31 00:00:02 localhost /USR/SBIN/CRON[31108]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil-restart-cron && /usr/sbin/tz-brasil-restart-cron)
Dec 31 00:03:01 localhost /USR/SBIN/CRON[31221]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 31 00:16:35 localhost -- MARK --
Dec 31 00:17:01 localhost /USR/SBIN/CRON[31755]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Dec 31 00:30:01 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 31 00:33:03 localhost /USR/SBIN/CRON[32762]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 31 00:56:36 localhost -- MARK --
Dec 31 01:00:01 localhost /USR/SBIN/CRON[1882]: (root) CMD (test -x /usr/sbin/cron-apt && /usr/sbin/cron-apt /etc/cron-apt/config2)
Dec 31 01:00:02 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 31 01:03:01 localhost /USR/SBIN/CRON[2093]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 31 01:16:37 localhost -- MARK --
Dec 31 01:17:02 localhost /USR/SBIN/CRON[2947]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Dec 31 01:20:33 localhost cron-apt: CRON-APT RUN [/etc/cron-apt/config2]: Sun Dec 31 01:00:03 BRST 2006
Dec 31 01:20:33 localhost cron-apt: CRON-APT SLEEP: 1171, Sun Dec 31 01:19:35 BRST 2006
Dec 31 01:20:33 localhost cron-apt: CRON-APT ACTION: 3-download
Dec 31 01:20:33 localhost cron-apt: CRON-APT LINE: /usr/bin/apt-get dist-upgrade -d -y -o APT::Get::Show-Upgraded=true
Dec 31 01:20:33 localhost cron-apt: Reading package lists...
Dec 31 01:20:33 localhost cron-apt: Building dependency tree...
Dec 31 01:20:33 localhost cron-apt: The following NEW packages will be installed:
Dec 31 01:20:33 localhost cron-apt:   libjaxp1.3-java libossp-uuid15 libxul-common sysvinit-utils
Dec 31 01:20:33 localhost cron-apt: The following packages will be upgraded:
Dec 31 01:20:33 localhost cron-apt:   initscripts libossp-uuid-perl libxalan2-java libxerces2-java libxul0d
Dec 31 01:20:33 localhost cron-apt:   sysvinit
Dec 31 01:20:33 localhost cron-apt: 6 upgraded, 4 newly installed, 0 to remove and 0 not upgraded.
Dec 31 01:20:33 localhost cron-apt: Need to get 0B/11.9MB of archives.
Dec 31 01:20:33 localhost cron-apt: After unpacking 1126kB of additional disk space will be used.
Dec 31 01:20:33 localhost cron-apt: Download complete and in download only mode
Dec 31 01:30:04 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 31 01:33:02 localhost /USR/SBIN/CRON[3889]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 31 01:56:37 localhost -- MARK --
Dec 31 02:00:09 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 31 02:03:02 localhost /USR/SBIN/CRON[4999]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 31 02:13:07 localhost kernel: usb 1-1.1: new full speed USB device using ohci_hcd and address 7
Dec 31 02:13:10 localhost kernel: SCSI subsystem initialized
Dec 31 02:13:11 localhost kernel: Initializing USB Mass Storage driver...
Dec 31 02:13:11 localhost kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Dec 31 02:13:11 localhost kernel: usbcore: registered new driver usb-storage
Dec 31 02:13:11 localhost kernel: USB Mass Storage support registered.
Dec 31 02:13:11 localhost kernel: usb-storage: device found at 7
Dec 31 02:13:11 localhost kernel: usb-storage: waiting for device to settle before scanning
Dec 31 02:13:16 localhost kernel:   Vendor: Flash     Model: Drive SM_USB20    Rev: 1000
Dec 31 02:13:16 localhost kernel:   Type:   Direct-Access                      ANSI SCSI revision: 00
Dec 31 02:13:16 localhost kernel: usb-storage: device scan complete
Dec 31 02:13:17 localhost kernel: SCSI device sda: 130048 512-byte hdwr sectors (67 MB)
Dec 31 02:13:17 localhost kernel: sda: Write Protect is off
Dec 31 02:13:17 localhost kernel: sda: Mode Sense: 43 00 00 00
Dec 31 02:13:17 localhost kernel: sda: assuming drive cache: write through
Dec 31 02:13:17 localhost kernel: SCSI device sda: 130048 512-byte hdwr sectors (67 MB)
Dec 31 02:13:17 localhost kernel: sda: Write Protect is off
Dec 31 02:13:17 localhost kernel: sda: Mode Sense: 43 00 00 00
Dec 31 02:13:17 localhost kernel: sda: assuming drive cache: write through
Dec 31 02:13:17 localhost kernel:  sda: sda1
Dec 31 02:13:17 localhost kernel: sd 0:0:0:0: Attached scsi removable disk sda

	Now the same stuff under 2.6.18:

~ $ uname -a
Linux bege 2.6.18-3-powerpc #1 Sun Dec 10 17:59:01 CET 2006 ppc GNU/Linux
~ $ lspci
00:00.0 Host bridge: Motorola MPC106 [Grackle] (rev 40)
00:0d.0 PCI bridge: Actiontec Electronics Inc Mini-PCI bridge (rev 11)
00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
00:10.0 Class ff00: Apple Computer Inc. Heathrow Mac I/O (rev 01)
00:12.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro 215GP (rev 5c)
01:0c.0 FireWire (IEEE 1394): NEC Corporation IEEE 1394 [OrangeLink] Host Controller (rev 01)
01:0d.0 USB Controller: OPTi Inc. 82C861 (rev 10)
~ $ dmesg
Using PowerMac machine description
Total memory = 288MB; using 1024kB for hash table (at cff00000)
Linux version 2.6.18-3-powerpc (Debian 2.6.18-8) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-20)) #1 Sun Dec 10 17:59:01 CET 2006
Found initrd at 0xc0376000:0xc09507f0
Found a Heathrow mac-io controller, rev: 1, mapped at 0xfdf80000
PowerMac motherboard: PowerMac G3 (Gossamer)
Found Grackle (MPC106) PCI host bridge at 0x0000000080000000. Firmware bus number: 0->1
nvram: OF partition at 0x1800
nvram: XP partition at 0x1300
nvram: NR partition at 0x1400
Top of RAM: 0x12000000, Total RAM: 0x12000000
Memory hole size: 0MB
On node 0 totalpages: 73728
  DMA zone: 73728 pages, LIFO batch:15
Built 1 zonelists.  Total pages: 73728
Kernel command line: ramdisk_size=8192 root=/dev/mapper/gv-raiz
irq: Found primary Apple PIC /pci/mac-io for 64 irqs
irq: System has 64 possible interrupts
PID hash table entries: 2048 (order: 11, 8192 bytes)
GMT Delta read from XPRAM: 0 minutes, DST: off
time_init: decrementer frequency = 16.708033 MHz
time_init: processor frequency   = 233.870000 MHz
Console: colour dummy device 80x25
serial8250_console_init: nothing to do on PowerMac
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
High memory: 0k
Memory: 271804k/294912k available (2920k kernel code, 22796k reserved, 268k data, 197k bss, 180k init)
Calibrating delay loop... 33.28 BogoMIPS (lpj=66560)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
device-tree: Duplicate name in /cpus/PowerPC,750, renamed to "l2-cache#1"
device-tree: Duplicate name in /pci/mac-io, renamed to "ide#1"
checking if image is initramfs... it is
Freeing initrd memory: 5993k freed
NET: Registered protocol family 16
PCI: Probing PCI hardware
PCI: Cannot allocate resource region 1 of device 0000:00:12.0
Registering pmac pic with sysfs...
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Thermal assist unit using timers, shrink_timer: 500 jiffies
audit: initializing netlink socket (disabled)
audit(1167569175.431:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Enabling device 0000:00:12.0 (0086 -> 0087)
atyfb: using auxiliary register aperture
atyfb: 3D RAGE PRO (Mach64 GP, PQFP, PCI) [0x4750 rev 0x7c]
atyfb: 2M SGRAM (1:1), 14.31818 MHz XTAL, 230 MHz PLL, 100 Mhz MCLK, 100 MHz XCLK
atyfb: monitor sense=717, mode 12
Console: switching to colour frame buffer device 80x30
atyfb: fb0: ATY Mach64 frame buffer device on PCI
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
serial8250_init: nothing to do on PowerMac
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
ttyS0 at MMIO 0xf3013020 (irq = 16) is a Z85c30 ESCC - Serial port
ttyS1 at MMIO 0xf3013000 (irq = 17) is a Z85c30 ESCC - Serial port
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
MacIO PCI driver attached to Heathrow chipset
fd0: SWIM3 floppy controller 
input: Macintosh mouse button emulation as /class/input/input0
Macintosh CUDA driver v0.5 for Unified ADB.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
adb: starting probe task...
adb devices: [2]: 2 2 [3]: 3 1
ADB keyboard at 2, handler set to 3
Detected ADB keyboard, type ANSI.
input: ADB keyboard as /class/input/input1
ADB mouse at 3, handler set to 4
input: ADB mouse as /class/input/input2
adb: finished probe task...
ide0: Found Apple Heathrow ATA controller, bus ID 0, irq 28
Probing IDE interface ide0...
hda: SAMSUNG SP0802N, ATA DISK drive
hda: Enabling MultiWord DMA 2
ide0 at 0xd3014000-0xd3014007,0xd3014160 on irq 28
ide1: Found Apple Heathrow ATA controller, bus ID 1, irq 30
Probing IDE interface ide1...
hdd: MATSHITA CR-587, ATAPI CD/DVD-ROM drive
hdd: Enabling MultiWord DMA 2
ide1 at 0xd3016000-0xd3016007,0xd3016160 on irq 30
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 180k init
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
  http://www.scyld.com/network/ne2k-pci.html
PCI: Enabling device 0000:00:0e.0 (0000 -> 0001)
eth0: RealTek RTL-8029 found at 0x1000, IRQ 24, 00:00:B4:97:E3:8B.
SCSI subsystem initialized
mesh: configured for synchronous 5 MB/s
ieee1394: Initialized config rom entry `ip1394'
mesh: performing initial bus reset...
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
hda: max request size: 512KiB
scsi0 : MESH
hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63, (U)DMA
hda: cache flushes supported
 hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7
hdd: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
eth1: BMAC at 00:05:02:ad:86:5a
PCI: Enabling device 0000:01:0c.0 (0014 -> 0016)
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18]  MMIO=[81801000-818017ff]  Max Packet=[1024]  IR/IT contexts=[4/4]
PCI: Enabling device 0000:01:0d.0 (0014 -> 0016)
ohci_hcd 0000:01:0d.0: OHCI Host Controller
ohci_hcd 0000:01:0d.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:01:0d.0: irq 18, io mem 0x81800000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using ohci_hcd and address 2
ohci_hcd 0000:01:0d.0: Unlink after no-IRQ?  Controller is probably using the wrong IRQ.
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
ts: Compaq touchscreen protocol output
EXT3 FS on dm-1, internal journal
input: PowerMac Beep as /class/input/input3
pktgen v2.67: Packet Generator for packet performance testing.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1048568k swap on /dev/mapper/gv-swap.  Priority:-1 extents:1 across:1048568k
phy registers:
 0000 0000 0000 0000 0000 0000 0000 0000
 0000 0000 0000 0000 0000 0000 0000 0000
 0000 0000 0000 0000 0000 0000 0000 0000
 0000 0000 0000 0000 0000 0000 0000 0000
lp: driver loaded but no devices found
~ $ cat /var/log/syslog
Dec 31 11:07:38 localhost syslogd 1.4.1#20: restart.
Dec 31 11:08:24 localhost anacron[2986]: Job `cron.daily' terminated (exit status: 1) (mailing output)
Dec 31 11:08:25 localhost anacron[2986]: Normal exit (1 job run)
Dec 31 11:17:01 localhost /USR/SBIN/CRON[3507]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Dec 31 11:19:38 localhost smartd[2778]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 151 to 124 
Dec 31 11:26:01 localhost gdm[2959]: O som de inÃcio de sessÃ£o foi requisitado em uma tela grÃ¡fica nÃ£o local, ou nÃ£o Ã© possÃvel executar o programa de reproduÃ§Ã£o de som ou o som nÃ£o existe
Dec 31 11:26:06 localhost gconfd (leandro-3576): iniciando (versÃ£o 2.16.0), pid 3576 usuÃ¡rio 'leandro'
Dec 31 11:26:06 localhost gconfd (leandro-3576): EndereÃ§o "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuraÃ§Ã£o com permissÃµes apenas de leitura na posiÃ§Ã£o 0
Dec 31 11:26:06 localhost gconfd (leandro-3576): O endereÃ§o "xml:readwrite:/home/leandro/.gconf" resolvido para uma fonte de configuraÃ§Ã£o com permissÃµes de escrita na posiÃ§Ã£o 1
Dec 31 11:26:06 localhost gconfd (leandro-3576): EndereÃ§o "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuraÃ§Ã£o com permissÃµes apenas de leitura na posiÃ§Ã£o 2
Dec 31 11:26:06 localhost gconfd (leandro-3576): EndereÃ§o "xml:readonly:/var/lib/gconf/debian.defaults" resolvido para uma fonte de configuraÃ§Ã£o com permissÃµes apenas de leitura na posiÃ§Ã£o 3
Dec 31 11:26:06 localhost gconfd (leandro-3576): EndereÃ§o "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuraÃ§Ã£o com permissÃµes apenas de leitura na posiÃ§Ã£o 4
Dec 31 11:26:22 localhost gconfd (leandro-3576): O endereÃ§o "xml:readwrite:/home/leandro/.gconf" resolvido para uma fonte de configuraÃ§Ã£o com permissÃµes de escrita na posiÃ§Ã£o 0
Dec 31 11:27:10 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 31 11:33:03 localhost /USR/SBIN/CRON[4039]: (root) CMD (/usr/bin/test -x /usr/sbin/tz-brasil && /usr/sbin/tz-brasil)
Dec 31 11:45:13 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 31 11:49:39 localhost smartd[2778]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 124 to 118 
Dec 31 11:52:25 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
Dec 31 11:52:46 localhost last message repeated 2 times
Dec 31 11:57:13 localhost modprobe: WARNING: Not loading blacklisted module ipv6 
~ $ lsusb

        As you see, on lsusb we just got stuck.


> This may be related to udev breakage i have been seeing recently.

	Pointers, please?

        And thank you very much, BTW!

-- 
sip:leandrod@ekiga.net                    xmpp:leandrod@jabber.org
+55 (11) 5685 2219                   Yahoo!: ymsgr:sendIM?lgcdutra
+55 (11) 9406 7191               ICQ: aim:GoIM?screenname=61287803
+55 (11) 5686 9607              http://br.geocities.com./lgcdutra/
+55 (11) 2122 0302    msnim:chat?contact=leandro@dutra.fastmail.fm
Reply to:
References:
- USB blocked under 2.6.18
  - From: leandro@dutra.fastmail.fm (Leandro Guimarães Faria Corcete DUTRA)
- Re: USB blocked under 2.6.18
  - From: Sven Luther <sven.luther@wanadoo.fr>
Prev by Date: Re: Cannot apply network settings unless I reboot
Next by Date: Re: your mail
Previous by thread: Re: USB blocked under 2.6.18
Next by thread: Cannot apply network settings unless I reboot
Index(es):
- Date
- Thread