Re: snd-aoa status update / automatic driver loading
On Wed, May 17, 2006 at 11:54:12PM +0200, Wolfgang Pfeiffer wrote:
>
>
> # lsmod | grep -i snd [again slightly edited]
> snd_aoa_codec_onyx 12736 2
> snd_aoa_fabric_layout 7716 2
> snd_aoa 8076 2 snd_aoa_codec_onyx,snd_aoa_fabric_layout
> snd_pcm_oss 45824 0
> snd_mixer_oss 19392 1 snd_pcm_oss
> snd_pcm 89060 2 i2sbus,snd_pcm_oss
> snd_timer 22468 1 snd_pcm
> snd_page_alloc 8744 1 snd_pcm
> soundbus 6436 2 snd_aoa_fabric_layout,i2sbus
> snd 60148 12 snd_aoa_codec_onyx,
> snd_aoa_fabric_layout,snd_aoa,i2sbus,
> snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
> soundcore 8612 1 snd
>
>
> [do you see modules that are not needed anymore with the new snd-aoa,
> with the hardware I have?]
Update:
changed /etc/modules to explicitly load only i2sbus:
--------------------
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
apm_emu
ide-cd
#ide-disk
#ide-generic
sbp2
i2c-powermac
#snd-powermac
#snd-aoa:
#soundbus
i2sbus
#snd-aoa
#snd-aoa-fabric-layout
#snd-aoa-codec-onyx
# End snd-aoa
cpufreq_performance
cpufreq_powersave
sr_mod
therm_adt746x
-------------------
.. which seems enough to load the rest of the needed snd modules:
After the change above [following op. slightly edited]:
---------------------
# lsmod | grep -i snd
snd_aoa_codec_onyx 12736 2
snd_aoa_fabric_layout 7716 1
snd_aoa 8076 2 snd_aoa_codec_onyx,snd_aoa_fabric_layout
snd_pcm_oss 45824 0
snd_mixer_oss 19392 1 snd_pcm_oss
snd_pcm 89060 2 i2sbus,snd_pcm_oss
snd_timer 22468 1 snd_pcm
snd_page_alloc 8744 1 snd_pcm
soundbus 6436 2 snd_aoa_fabric_layout,i2sbus
snd 60148 10 snd_aoa_codec_onyx,
snd_aoa_fabric_layout,snd_aoa,i2sbus,
snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 8612 1 snd
---------------------
>
>
> /etc/modules:
> -------------------------
> # /etc/modules: kernel modules to load at boot time.
> #
> # This file contains the names of kernel modules that should be loaded
> # at boot time, one per line. Lines beginning with "#" are ignored.
>
> apm_emu
> ide-cd
> #ide-disk
> #ide-generic
> sbp2
> i2c-powermac
> #snd-powermac
>
> #snd-aoa:
> soundbus
> i2sbus
> snd-aoa
> snd-aoa-fabric-layout
> snd-aoa-codec-onyx
> # End snd-aoa
>
> cpufreq_performance
> cpufreq_powersave
> sr_mod
> therm_adt746x
>
> ------------------------
HTH
Regards
Wolfgang
--
Wolfgang Pfeiffer: /ICQ: 286585973/ + + + /AIM: crashinglinux/
http://profiles.yahoo.com/wolfgangpfeiffer
Key ID: E3037113
http://keyserver.mine.nu/pks/lookup?search=0xE3037113&fingerprint=on
Reply to: